Jump to main content

All About Agar

An Introduction to Agar

With its distinctive smell, one can easily distinguish agar from the other materials commonly found in a laboratory. Chemically, agar is a polymer made up of subunits of the sugar galactose, and is a component of the cell walls of several species of red algae that are usually harvested in eastern Asia and California. Dissolved in boiling water and cooled, laboratory agar looks gelatinous. Although agar's chief use is as a culture medium for various microorganisms, particularly for bacteria, its other less well-known uses include serving as a thickening for soups and sauces, in jellies and ice cream, in cosmetics, for clarifying beverages, and for sizing fabrics.(1)

One might ask why agar, as opposed to regular gelatin (like that found in Jello), is used for culturing bacteria. The answer is agar, unlike gelatin, won't be degraded (eaten) by bacteria. Also, agar is firmer and stronger than gelatin. It's still possible, however, to use gelatin as a culture medium for bacteria if agar is unavailable.(2)

The Difco & BBL Manual gives more details about agar and its usage:(3)

Agar is a phycocolloid extracted from a group of red-purple marine algae (Class Rhodophyceae) including Gelidium, Pterocladia and Gracilaria. Gelidium is the preferred source for agars. Impurities, debris, minerals and pigment are reduced to specified levels during manufacture.
Agar is a gel at room temperature, remaining firm at temperature as high as 65°C. Agar melts at approximately 85°C, a different temperature from that at which it solidifies, 32-40°C. This property is known as hysteresis. Agar is generally resistant to shear forces; however, different agars may have different gel strengths or degrees of stiffness.
Agar is typically used in a final concentration of 1-2% for solidifying culture media. Smaller quantities (0.05-0.5%) are used in media for motility studies (0.5% w/v) and for growth of anaerobes (0.1%) and microaerophiles.
Specifications for bacteriological grade agar include good clarity, controlled gelation temperature, controlled melting temperature, good diffusion characteristics, absence of toxic bacterial inhibitors and relative absence of metabolically useful minerals and compounds.

The Best Agar for Student Projects

For students growing bacteria at home without the supervision of a teacher (for example, investigating bacteria growth at various places around the house), it's important to use an agar formulation that does not preferentially grow one kind of bacteria over another. The worst case would be one that preferentially grew pathogenic bacteria. Therefore, we recommend a plain nutrient agar. Ready-to-use petri dishes with nutrient agar can be purchased directly from Carolina Biological.

Common Types of Agar

Different types of agar are used for growing different strains of bacteria. Generally, an experimental procedure will tell you what type of agar to use. If you are still unsure, ask a teacher or consult our Ask An Expert forum. Not all types of agar are good for students to use unsupervised at home. The following list will give you an overview of a few of the types of agar commonly found in laboratories. Many of these can be bought from Carolina Biological.

Type of Agar Brief Description Suitable for Student Use?
Blood Agar Contains blood cells from an animal (e.g. a sheep); most bacteria will grow on this medium. No, due to potential for contamination from human contact.
Chocolate Agar Comprised of sheep blood that provides the X and V factors necessary for Haemophilus growth, this is a nutrient medium which is used in culturing fastidious organisms such as Haemophilus species and Neisseria. Chocolate agar, however, does not reveal hemolysis data, so species differentiation among the members of Haemophilus must be performed in another manner. No, due to potential for contamination from human contact.
LB (Luria Bertani) Agar A subtype of nutrient agar, this is the general medium for microbiology studies and may be used for routine cultivation of not particularly fastidious microorganisms. Also, does not preferentially grow one kind of bacteria over another. Yes.
MacConkey Agar This is an agar upon which only Gram-negative bacteria can grow. What is more is that E.coli will grow into red colonies, as there is a pH indicator present. It should be mentioned that MacConkey agar powder comes in two versions: one with the sugar lactose in it, and one without any added sugars. Since E.coli ferments sugars to acids (thus the red color), one can add one of the many different kinds of sugars to this sugar-free MacConkey agar and see if red colonies develop. If you get red colonies, you know the E.coli strain you are using can use that sugar. No, due to selectivity.
Miller's LB Agar This common variation of LB agar appears to have the same components as LB, just in different proportions. Yes, but sticking with the generic formula is recommended.
Neomycin Agar Contains the antibiotic neomycin, which found in many medications such as creams, ointments and eyedrops. Neomycin was discovered in 1949 by the microbiologist Selman Waksman, and it is produced naturally by the bacterium Streptomyces fradiae. Moreover, Neomycin has a broad spectrum of effects, killing both gram-positive and gram negative bacteria. It is relatively toxic to humans, and some people have allergic reactions to it. Often, Neomycin agar is used for culturing organisms anaerobically. Neomycin stops the growth of gram-negative bacilli and staphylcocci, allowing Streptococcus species to grow more abundantly. No, due to safety concerns.
Non-nutrient Agar Usually not suitable for growing bacteria. However, may be used for growing other microorganisms. No.
Nutrient Agar Will grow the largest number of different types of microbes - fungi and bacteria. Yet, not all bacteria can grow on these. Some find it too rich, and others find it deficient. The nutrient in this is beef broth, and some extracts from yeast. Yes.
Sabouraud Agar Used for fungi and has a low pH that will kill most bacteria. It contains gentamicin, which is a aminoglycoside antibiotic. Gentamicin can also treat many different types of bacterial infections, particularly Gram-negative infection. No, due to safety concerns.
Thayer-Martin Agar Chocolate agar designed to isolate Neisseria gonorrhoeae, also known as "gonococcus," which is a species of Gram-negative bacterium responsible for the disease gonorrhoea. No, due to potential for contamination from human contact.
Tryptic Soy Agar A basic medium used for culturing many kinds of microorganisms. Tryptic soy agar is mainly used as an initial growth medium for the purposes of: observing colony morphology, developing a pure culture, achieving sufficient growth for further biochemical testing, and culture storage. Yes.
XLD Agar Xylose lysine deoxycholate agar. It is used for the culture of stool samples, and contains two indicators. It is formulated to inhibit Gram-positive bacteria, while the growth of Gram-negative bacilli is encouraged. The colonies of lactose fermenters appear yellow. No, due to selectivity.

Preparing Bottled Agar and Plates(5)

Pre-experiment:

Keep sterile Petri dishes closed until ready to pour agar into them. Air-borne contaminants can easily invade an open Petri dish.

Although pre-poured agar plates are available, one can make agar plates from tablet, powdered, or bottled agar by following a few simple instructions. Agar kits usually come with detailed instructions on how to prepare plates, and below are sample procedures for reference. When in doubt, be sure to clearly read the instructions and ask for help if needed (either consult a teacher or call the technical help line of the agar kit supplier).

Preparing Tablet or Powdered Agar:

The formulation for LB (Luria Bertani) agar is: 9.1 g/L tryptone, 4.6 g/L yeast extract, 4.6 g/L NaCl, and 13.7 g/L agar. If using tablets, dissolve 10 tablets per 500 ml of water. For agar powders, dissolve by microwaving, 6.9 g of agar in 500 ml of water. 500 ml of agar will pour ~ 25 large Petri dishes (100 mm diameter) or 50 small Petri dishes (60 mm diameter).

Preparing Bottled Agar:

Preparing Pre-Poured Plates:

If plates have been refrigerated, set them out and allow them to warm to room temperature.

Storage:

Stack agar plates upside down in the refrigerator. Do Not Freeze! The purpose of placing the plates upside down is to prevent condensation from dripping down onto the agar surface which could then facilitate movement of organisms between colonies.

Please see Tips for Pouring and Storing Agar Plates for additional tips.

Additional Safety Considerations(6)

Incubation(7)

Place each Petri dish inside a zip lock bag to prevent drying out and to control odors. Turn the plates upside down and put them in a warm place. For many microorganisms, the ideal temperature for incubation is 32°C or 90°F. Bacterial growth should start to become visible in 2-3 days.

For those growing bacteria at home (for example, investigating bacteria growth at various places around the house), you may use a homemade "light bulb incubator" in place of a laboratory incubator. This Make Your Own Incubator page describes how to construct a "light bulb incubator".

Disposal(8)

Once the Petri dishes have been taped shut, they should not be opened again. All microorganisms grown during the experiment should be killed before discarding. The best way to dispose of bacterial cultures is to pressure sterilize them in a heat stable biohazard bag. If autoclaves or pressure cookers are not available or large enough to make this convenient, an alternative is to bleach the plates. Saturate the plates with a 20% or "1 in 5" household bleach solution (in other words, 1 part bleach and 4 parts water). Let them sit and soak overnight in the bleach solution before disposing of them. Please note that the bleach solution is corrosive and needs to be thoroughly removed afterwards. In addition, the plates can be incinerated if access to an incinerator is available.

References

Dorland, W.A.M. (2012). Dorland's Medical Dictionary. Retrieved January 17, 2013.

University of Texas Health Science Center, Houston. Retrieved July 13, 2022.

Endnotes

(1) "Agar plate." Wikipedia. Retrieved January 14, 2005.

(2) "Microbiology." MadSci Network. Retrieved January 25, 2005.

(3) "Agar." Difco & BBL Manual. Retrieved January 17, 2013.

(4) This is the catalog number for nutrient agar. Please follow the item description at the bottom, next to the catalog number, and not the picture caption, which says non-nutrient agar.

(5) "Agar Bottles - Preparation & Equipment Use." Science Stuff, Inc. Retrieved January 14, 2005.

(6) "Artificial Environments for Growing Bacteria." Mott, et al. WW Bio Institute. (www.woodrow.org/teachers/esi/2002/Biology/Projects/lab_skills/ls5/). Retrieved January 14, 2005.

(7) "Agar Bottles - Preparation & Equipment Use." Science Stuff, Inc. Retrieved January 14, 2005.

(8) Leung, Beatrice. Science Buddies Advisor, email correspondence 1/10/05.

Credits

Shijun Liu, Science Buddies
Laurie Usinger, Bio-Rad Laboratories

Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.