I actually have a project for myself to make a laser gun so I have a question
what are the requirements to make a laser gun?
1.Laser pointers
2.?????
3.?????
4.?????
and etc.
so please answer me, I really wanted to try this
Questions about Laser guns
Moderators: kgudger, bfinio, MadelineB, Moderators
-
- Former Expert
- Posts: 1415
- Joined: Sat Nov 08, 2003 11:27 pm
- Occupation: Planetary Scientist
- Project Question: N/A
- Project Due Date: N/A
- Project Status: Not applicable
Re: Questions about Laser guns
Hi Vann,
Can you please provide some more details about your laser gun project? Is this for a school science or engineering fair? What do you want your laser gun to be able to do? Telling us more about your project and your goals for it will help us help you more effectively.
I look forward to hearing more about your project.
Can you please provide some more details about your laser gun project? Is this for a school science or engineering fair? What do you want your laser gun to be able to do? Telling us more about your project and your goals for it will help us help you more effectively.
I look forward to hearing more about your project.
All the best,
Terik
Terik
Re: Questions about Laser guns
actually it is for my brother's project their 1 week is to make a blueprint, and 2 weeks is build it, and they should invent something or use the other ideas on the internet and improve it and since they will compete on other groups on the other sections of the school, so we made a plan to make something like a center of the attention, well since we are not even a Mechatronics Engineers or Electronic Engineers or Nanoengineers, we instead try to think of something that we think we can build it and make it work, and what we plan is a laser gun or an exosuit(but Exosuits are like not-now)
so now I just found this on the internet and was thinking to use these as building practice:
DVD Burner/Driver Diode
100 ohm Potentiometer
10 ohm Resistors
1N4001 Rectifier Diode
47uf 35v Capacitor
and 6 or above volt Power Source
(Soldering and Wires are obviously included)
but I still don't know where to get a 12x30mm Aixiz Laser Housing here in the philippines
we plan to make a laser sniper rifle that could do a 200-500 watt shot, I mean seriously, me and my brother are dangerous mad men, and I have more questions except for requirements to make a Laser gun:
If I have a 5 watt laser pointer and 3 aligned Magnifying Glasses, and I point the laser point on the aligned magnifying glasses, will it become more powerful or widens the light of the laser and be the same or something else?
If I only have one DVD Burner/Driver Diode and a hand sized teddy bear, and I want to increase the single DVD Burner/Driver Diode's power until it can burn the teddy bear in a few seconds or an instant then what should I do? should I need something to put more? or should I only needed to put more DVD Burner/Driver Diode? or the DVD Burner/Driver Diode will not work at all?
how can I put sounds on the laser gun whenever I triggered it?
so now I just found this on the internet and was thinking to use these as building practice:
DVD Burner/Driver Diode
100 ohm Potentiometer
10 ohm Resistors
1N4001 Rectifier Diode
47uf 35v Capacitor
and 6 or above volt Power Source
(Soldering and Wires are obviously included)
but I still don't know where to get a 12x30mm Aixiz Laser Housing here in the philippines
we plan to make a laser sniper rifle that could do a 200-500 watt shot, I mean seriously, me and my brother are dangerous mad men, and I have more questions except for requirements to make a Laser gun:
If I have a 5 watt laser pointer and 3 aligned Magnifying Glasses, and I point the laser point on the aligned magnifying glasses, will it become more powerful or widens the light of the laser and be the same or something else?
If I only have one DVD Burner/Driver Diode and a hand sized teddy bear, and I want to increase the single DVD Burner/Driver Diode's power until it can burn the teddy bear in a few seconds or an instant then what should I do? should I need something to put more? or should I only needed to put more DVD Burner/Driver Diode? or the DVD Burner/Driver Diode will not work at all?
how can I put sounds on the laser gun whenever I triggered it?
Last edited by Vann on Sat Sep 03, 2016 2:53 am, edited 2 times in total.
Re: Questions about Laser guns
plus I am his little brother and I won't miss this chance to make something so true in my life, my goals is very hard so I am making my goal as a secret
-
- Moderator
- Posts: 360
- Joined: Mon Oct 03, 2011 12:26 pm
- Occupation: Space Test Analyst
- Project Question: "To explain all nature is too difficult a task for any one man. 'Tis much better to do a little with certainty and leave the rest for others that come after you, than to explain all things by conjecture without making sure of anything." - Sir Isaac Newton
- Project Due Date: N/A
- Project Status: Not applicable
Re: Questions about Laser guns
Van,
A 200W laser is an insane amount of power to have in a hand held laser. A 5W laser is enough to burn material and start a fire. Building something that powerful out of a dvd laser diode wouldn't be feasible. These diodes are around 300-400mW (less than half a watt). As a rule of thumb, the output power is around 85% of the input current of your circuit, so to get 300-400mW output you need a circuit that drives around 350-450mA of current. You can't force the power output of the laser higher than this (at least not for a long period of time) as it will destroy the diode.
As for focusing your 5W laser pointer with lenses. It will not increase the total power of the beam. What it dies is concentrates the beam so more of the power is focused onto a single point.
Many of the things you are talking about can be quite dangerous. Even a relatively low power laser can cause damage to the eyes and burn skin.
Please take care if you build or experiment with lasers. Please have an adult to help.
A 200W laser is an insane amount of power to have in a hand held laser. A 5W laser is enough to burn material and start a fire. Building something that powerful out of a dvd laser diode wouldn't be feasible. These diodes are around 300-400mW (less than half a watt). As a rule of thumb, the output power is around 85% of the input current of your circuit, so to get 300-400mW output you need a circuit that drives around 350-450mA of current. You can't force the power output of the laser higher than this (at least not for a long period of time) as it will destroy the diode.
As for focusing your 5W laser pointer with lenses. It will not increase the total power of the beam. What it dies is concentrates the beam so more of the power is focused onto a single point.
Many of the things you are talking about can be quite dangerous. Even a relatively low power laser can cause damage to the eyes and burn skin.
Please take care if you build or experiment with lasers. Please have an adult to help.
Hope this helps.
theborg
----------
Science Buddies science fair guide:
http://www.sciencebuddies.org/science-fair-projects/project_guide_index.shtml
Science Buddies project ideas:
http://www.sciencebuddies.org/science-fair-projects/project_ideas.shtml
theborg
----------
Science Buddies science fair guide:
http://www.sciencebuddies.org/science-fair-projects/project_guide_index.shtml
Science Buddies project ideas:
http://www.sciencebuddies.org/science-fair-projects/project_ideas.shtml
Re: Questions about Laser guns
now I have questions:
What are the branches and principles of science is related to Laser?
is there a system of a laser? like for example Hydraulic Drive System, or if a system for lasers doesn't exists actually then it is okay for me, just making sure actually
What are the branches and principles of science is related to Laser?
is there a system of a laser? like for example Hydraulic Drive System, or if a system for lasers doesn't exists actually then it is okay for me, just making sure actually