**Moderators:** MelissaB, kgudger, Ray Trent, Moderators

3 posts
• Page **1** of **1**

My science project I'm doing is "How Sweet It Is: Measuring Glucose in Your Food" but there is one term I don't understand at all. It's how to make a dilution series and I'm confused on what it is, yet alone know what to do. I need someone to explain to me how to do it, so I understand it very easily. My science project is due in 2 weeks and I need to start doing the procedure. Thanks

- somevesweet
**Posts:**1**Joined:**Thu Feb 07, 2013 1:28 pm**Occupation:**Student: 8th grade**Project Question:**Measuring glucose levels in different foods**Project Due Date:**February 20th, 2013**Project Status:**I am conducting my research

Hi,

I think you are doing this excellent project from the Science Buddies website:

http://www.sciencebuddies.org/science-f ... #procedure

The experimental procedure section suggests making a series of dilutions for a positive control. Starting with a 4% solution, you are supposed to dilute the sample in half, so you have 7 dilutions with the following concentrations of glucose 4%, 2%, 1%, 0.5%, 0.25%, 0.125% and 0.0625%.plus the negative control, which if pure water.

Here are the directions from the procedure:

Label seven cups 1–7.

Add 8 g of glucose to 200 mL water in cup #1 to make the 4% solution.

Add 100 mL of water to each of the six remaining cups (2–7).

Add 100 mL of the 4% solution to cup #2 to make a 2% solution.

Then add 100 mL of the 2% solution to cup #3 to make a 1% solution.

Let me describe the first dilution in detail to help you get started.

Your first cup will be 200 ml of water containing 8 grams of dissolved glucose

Your second cup is 100 ml of water

To make the first dilution, transfer 100 ml of cup 1 to cup 2 and mix well.

Cup 2 now contains ½ of the concentration of glucose compared to cup 1, or 2%. So you have made a one to two dilution.

Now repeat the procedure using 100 ml from cup 2 to transfer to the 100 ml of water in cup 3. Cup 3 now contains 1% glucose.

Does this help?

Donna Hardy

I think you are doing this excellent project from the Science Buddies website:

http://www.sciencebuddies.org/science-f ... #procedure

The experimental procedure section suggests making a series of dilutions for a positive control. Starting with a 4% solution, you are supposed to dilute the sample in half, so you have 7 dilutions with the following concentrations of glucose 4%, 2%, 1%, 0.5%, 0.25%, 0.125% and 0.0625%.plus the negative control, which if pure water.

Here are the directions from the procedure:

Label seven cups 1–7.

Add 8 g of glucose to 200 mL water in cup #1 to make the 4% solution.

Add 100 mL of water to each of the six remaining cups (2–7).

Add 100 mL of the 4% solution to cup #2 to make a 2% solution.

Then add 100 mL of the 2% solution to cup #3 to make a 1% solution.

Let me describe the first dilution in detail to help you get started.

Your first cup will be 200 ml of water containing 8 grams of dissolved glucose

Your second cup is 100 ml of water

To make the first dilution, transfer 100 ml of cup 1 to cup 2 and mix well.

Cup 2 now contains ½ of the concentration of glucose compared to cup 1, or 2%. So you have made a one to two dilution.

Now repeat the procedure using 100 ml from cup 2 to transfer to the 100 ml of water in cup 3. Cup 3 now contains 1% glucose.

Does this help?

Donna Hardy

- donnahardy2
- Expert
**Posts:**2230**Joined:**Mon Nov 14, 2005 12:45 pm

Hello somevesweet,

You are definitely not alone when it comes to confusion about how to make serial dilutions! I had a hard time understanding it when I was in school, but looking at a picture helped me. Here is a visual diagram of what Donna is talking about regarding making serial dilutions. Sometimes this idea is hard to visualize without a diagram.

http://biology.kenyon.edu/courses/biol0 ... ution3.htm

http://www.wikihow.com/Do-Serial-Dilutions

Does it make sense to you how to start with a 4% solution and go to a 2%, 1%, etc..?

1. A 4% solution means there is 4mL of solute (glucose) in 100mL of solution (in this case, water), so 4mL/100mL = 4%, the same as 0.04.

2. If you start with 200mL, how much glucose will you need?

--Back to algebra: the equation is X mL/200mL=4 mL/100mL.

--So x= 8mL glucose. (this information was already given to you, I'm just providing some background information for understanding)

Remember that when you make a serial dilution, the total amount in each tube should be the same, otherwise it is not a serial dilution. Each tube should have 200mL in it, according to the procedure.

3. if the [b]total volume needs to be 200mL [/b]and you know that in order to make a 4% solution, you need to add 8mL (the equation we just performed above),

You now have a 4% solution; use that for your next dilutions. After your calculation, add that amount from tube#1. You will always be taking 100mL from the previous tube in order to make your next dilution, and NOT adding more of the original 4% glucose.

Does this make sense? Let me know if you need clarification.

You are definitely not alone when it comes to confusion about how to make serial dilutions! I had a hard time understanding it when I was in school, but looking at a picture helped me. Here is a visual diagram of what Donna is talking about regarding making serial dilutions. Sometimes this idea is hard to visualize without a diagram.

http://biology.kenyon.edu/courses/biol0 ... ution3.htm

http://www.wikihow.com/Do-Serial-Dilutions

Does it make sense to you how to start with a 4% solution and go to a 2%, 1%, etc..?

1. A 4% solution means there is 4mL of solute (glucose) in 100mL of solution (in this case, water), so 4mL/100mL = 4%, the same as 0.04.

2. If you start with 200mL, how much glucose will you need?

--Back to algebra: the equation is X mL/200mL=4 mL/100mL.

--So x= 8mL glucose. (this information was already given to you, I'm just providing some background information for understanding)

Remember that when you make a serial dilution, the total amount in each tube should be the same, otherwise it is not a serial dilution. Each tube should have 200mL in it, according to the procedure.

3. if the [b]total volume needs to be 200mL [/b]and you know that in order to make a 4% solution, you need to add 8mL (the equation we just performed above),

You now have a 4% solution; use that for your next dilutions. After your calculation, add that amount from tube#1. You will always be taking 100mL from the previous tube in order to make your next dilution, and NOT adding more of the original 4% glucose.

Does this make sense? Let me know if you need clarification.

Always remain curious,

Sarah

Sarah

- sarahlaugtug
- Expert
**Posts:**91**Joined:**Wed Sep 12, 2012 3:49 pm**Occupation:**Biology, Ecology Educator**Project Question:**Ask an Expert Volunteer**Project Due Date:**n/a**Project Status:**Not applicable

3 posts
• Page **1** of **1**

Return to Grades 6-8: Life, Earth, and Social Sciences

Users browsing this forum: No registered users and 4 guests