Jump to main content

The Wright Stuff: Using Kites to Study Aerodynamics

1
2
3
4
5
17 reviews

Abstract

The Wright brothers used kites extensively to test their design ideas in the years leading up to their first successful airplane flight. With this science project, you'll learn about kite aerodynamics, and then come up with your own hypothesis about building or flying a kite. You can test your hypothesis two ways: with an online kite simulation program from NASA, and outdoors with the real thing! A great feature of this science project is that it has many possible variations, so you can decide exactly in which direction you want to take it.

Summary

Areas of Science
Difficulty
 
Time Required
Average (6-10 days)
Prerequisites
Excellent computer skills
Material Availability
Readily available
Cost
Very Low (under $20)
Safety
Normal precautions for kite flying
Credits
Andrew Olson, Science Buddies
NASA's Glenn Research Center, for the Kite Simulation program.

Objective

The objective of this science project is to determine the effect of changing the bridle point—the point where the kite string, or control line, attaches to the bridle—on the kite's flying height, while keeping the length of the control line constant.

Introduction

Kites aren't just for kids. The Wright brothers used kites to test virtually every idea they had on airplane design before actually flying the test planes, and sometimes they flew their full-size gliders as kites to do additional tests.

Building and flying kites is a great way to start learning about aerodynamics. As you are flying the kite, you can actually feel your kite reacting to the wind through the changes in tension and motion of the string. If you've flown kites before, this science project can bring a scientific foundation to what you already know from experience. Who knows, maybe it will make you a better kite flier!

The science project you'll be doing has many possible variations. You can concentrate on kite design and compare flight performance as a design variable is changed. There are many types of kites to choose from, (for example: diamond, delta wing, and box) each with its own design elements, so you have a lot of choices. You can also choose which flight performance characteristic(s) you want to measure (for example: maximum height, string tension, lift capacity). Another way to go with this science project is to stick with a single kite design and investigate the effects of "trim" adjustments on flight (as in the Experimental Procedure example below). As you do your background research, think about which aspect of building and flying kites interests you most, and think about questions you might like to investigate.

NASA's Glenn Research Center has a great online kite simulation program (see Bibliography), which you can use as a learning tool for this project. It will help you get familiar with the basics of kite aerodynamics. It can also help you focus your ideas as you develop a hypothesis to test (or narrow down your list if you have a lot of ideas). Finally, you can use it to do a first-pass test on your hypothesis before you do your experiment with real kites. Keep in mind that a simulation is an idealized model of the real world. Any computer simulation contains assumptions, whether explicit or implicit, which may or may not be valid for particular conditions. It will be interesting to compare the results of the simulation and your real-life flight tests.

Terms and Concepts

To do kite science project, you should do research that enables you to understand the following terms and concepts:

For variations of this project, you should be able to explain in your own words how you expect your experimental variable(s) to affect the flight behavior of your kite(s), in terms of the forces on the kite in flight.

Bibliography

  • TPT. (2006). Kites by Danielle and Jasmine. DragonflyTV, Twin Cities Public Television. Retrieved January 20, 2023.
  • NASA's Glenn Research Center has excellent online aerodynamics resources. Their pages are extensively hyperlinked, so you can follow your own path through the material. A good place to start is the "Guided Tour" page, where you can scroll down to the section on Kites.
    NASA Glenn Research Center. (2006, October 5). Guided Tours of the BGA. Retrieved May 12, 2008.
  • You can go directly to NASA's kite simulator page with this link:
    NASA Glenn Research Center. (2005, October 24). Interactive Kite Modeler Version 1.4a. Retrieved May 12, 2008.
  • This page describes a graphical method for estimating the altitude of your kite:
    NASA Glenn Research Center. (2006, March 20). Graphical Maximum Altitude. Retrieved May 12, 2008.
  • Make sure you follow the safe kite-flying practices described on NASA's kite safety page:
    NASA Glenn Research Center. (2006, March 21). Kite Safety. Retrieved May 12, 2008.
  • There are many sources of information on building and flying kites. The Drachen Foundation is one good online source:
    The Drachen Foundation. (2008). Kite Basics. Retrieved January 20, 2023.
  • Don't miss their excellent page on kite building, including information on knots used in building and flying kites and a wind chart to help estimate wind speed (Beaufort Scale):
    The Drachen Foundation. (2008). Kite Building. Retrieved January 20, 2023.

Materials and Equipment

Experimental Procedure

  1. First, do your background research on kite aerodynamics.
  2. Select a design and build your kite. Be sure to choose a kite type that uses a bridle string.
  3. Use the NASA Kite Simulator program, from the Bibliography, to make a model of your kite and "test fly" it. Complete instructions for using the simulator are on the program's webpage. Important: most modern web browsers will not run Java applets (the type of program used to make the NASA Kite Simulator). You may need to search for a third-party app or browser extension to run the program on your computer, such as the CheerpJ Applet Runner for Chrome.

    Here are some screenshots of the Kite Simulator program for reference, and an outline of the procedure you will follow to use it.
    1. Use design mode to make a model of your kite (select from Design Mode, Trim Mode, and Fly Mode by pressing the appropriate button in the simulator). Press the Shape button and then select the desired kite type from the drop-down list.

      Screenshot of a kites shape in design mode in the Kite Simulator program

      The NASA Kite Simulator program has a large image of a virtual kite on the left side of the screen. The right side of the screen has a panel with 3 tabs that allow all variables of a kite to be changed. The shape of the Kite is selected from a drop-down menu in the design tab on the right of the screen towards the center.



    2. In design mode, you can also select the type of materials your kite is made of. Press the Material button, and then make your selections from the drop-down lists.

      Screenshot of a kites materials in design mode in the Kite Simulator program

      The NASA Kite Simulator program has an option to change the material of different parts of the kite in the material tab under design. Different materials can be chosen for the kite surface, frame, tail and line. These options are found on the bottom right side of the screen.



    3. You can use the dimension controls to change the shape of your kite. To change dimensions, you can type in a number, or use the arrows or sliders to make adjustments. You can choose English or metric units.

      Screenshot of a kites dimensions in design mode in the Kite Simulator program

      The NASA Kite Simulator program has options to change the size of the kite in the shapes tab under design. Sliders can be adjusted to increase or decrease the height of the bottom or top half of the kite. The width of the kite can also be adjusted with sliders. These options are found on the bottom right side of the screen.



    4. Use trim mode to make adjustments to bridle point. You can use the arrow keys to make adjustments in small steps. B-Bridle: changes the total length of the bridle string. K-Knot: adjusts the bridle point; this is the distance from the tail to the control line knot. T-Tail: is the length of the tail. As you make adjustments, you'll see immediately what effect this has on the angle of the kite.

      Screenshot of a kites trim ajustments in the Kite Simulator program

      The NASA Kite Simulator program has the ability to simulate a kite in flight in the window on the left side of the program. Under the trim tab adjustments can be made to a kite in flight and have them be reflected in the window. Adjustments are found in the bottom right of program and sliders are used to change the angle, bridle, knot and tail.



    5. Your trim adjustments may make the kite unstable, but don't worry, it's easy to fix. Make your adjustments in small steps with the arrow keys. If the kite becomes unstable, back off on your adjustments by a step or two. Remember that you can always go back to the starting conditions by pressing the Set button.

      Screenshot of a warning message for unstable design or trim in the Kite Simulator program

      The NASA Kite Simulator program will post an alert over the left window if a simulated kite is unstable. A button labeled "set" at the bottom left of the program can be pressed to reset the kite to original values.



    6. Switch to fly mode to see how your change to the bridle point (in trim mode) affects the kite's flying height. There are controls at the bottom for entering your flying conditions. To convert wind speed from miles per hour to feet per second, multiply by 1.47 (5280 feet/mile * 1 hour / 3600 seconds). Remember to keep the flight conditions constant throughout your simulation, and throughout your experiment in the field.

      Screenshot of a kites flying conditions set in the Kite Simulator program

      The NASA Kite Simulator program has options to change the variables of a simulated kite in flight under the fly tab. Sliders at the bottom right of the program allow for the wind speed, altitude, line length and payload weight to be changed. Information about a simulated kite in the air are also displayed at the top right of the program.



  4. Use the results from your simulation experiment to help decide how long to make your bridle string, and where to try placing the bridle point. Then go out and do an actual flight test. It is best to repeat your test two or three times for each condition.
  5. Here is an example data table (use numbers from your own kite and experiments):
Trial # Bridle Length Bridle Point Flying Height
1 15.5 12.5 63
2 15.5 12.5 62
3 15.5 12.5 65
1 15.5 12.0 72
2 15.5 12.0 70
3 15.5 12.0 73
Example table for collecting flight data
  1. This NASA Grapical Maximum Altitude page has a detailed procedure for measuring the flying height of your kite. You can check it out by measuring an object of known height.
icon scientific method

Ask an Expert

Do you have specific questions about your science project? Our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Global Connections

The United Nations Sustainable Development Goals (UNSDGs) are a blueprint to achieve a better and more sustainable future for all.

This project explores topics key to Industry, Innovation and Infrastructure: Build resilient infrastructure, promote sustainable industrialization and foster innovation.

Variations

  • From your background research, or perhaps from your experience flying kites, you will probably have your own ideas for changing a kite design and predicting what will happen. Once you are familiar with the Kite Simulator program, you will see that it can be a great tool for testing your predictions. If an answer surprises you, go ahead and build the kite and see what happens in the real world.
  • Here are some suggestions to get you thinking. We're sure you can come up with many more on your own:
    • More surface area more lift, right? But more surface area also means more material, and more material means more weight. Which one wins out? How does it depend on the choice of material?
    • Can you devise a diamond kite design with the center of pressure and the center of gravity in the same spot? Is this design more or less stable in flight? Why?
    • What is the optimal length for a tail? Does it depend on wind conditions? Why?

Careers

If you like this project, you might enjoy exploring these related careers:

Career Profile
Humans have always longed to fly and to make other things fly, both through the air and into outer space—aerospace engineers are the people that make those dreams come true. They design, build, and test vehicles like airplanes, helicopters, balloons, rockets, missiles, satellites, and spacecraft. Read more
Career Profile
Aerospace engineering and operations technicians are essential to the development of new aircraft and space vehicles. They build, test, and maintain parts for air and spacecraft, and assemble, test, and maintain the vehicles as well. They are key members of a flight readiness team, preparing space vehicles for launch in clean rooms, and on the launch pad. They also help troubleshoot launch or flight failures by testing suspect parts. Read more
Career Profile
CAD (computer-aided design) technicians combine art and engineering to prepare the technical drawings and plans from which everything in the world is made—from toys to toasters, houses to hoses, satellites to sewer systems. CAD technicians are essential to the design and construction of everything you see around you. Read more

News Feed on This Topic

 
, ,

Cite This Page

General citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.

MLA Style

Science Buddies Staff. "The Wright Stuff: Using Kites to Study Aerodynamics." Science Buddies, 21 Jan. 2023, https://www.sciencebuddies.org/science-fair-projects/project-ideas/Aero_p008/aerodynamics-hydrodynamics/kites-wright-brothers?from=Home. Accessed 19 Mar. 2024.

APA Style

Science Buddies Staff. (2023, January 21). The Wright Stuff: Using Kites to Study Aerodynamics. Retrieved from https://www.sciencebuddies.org/science-fair-projects/project-ideas/Aero_p008/aerodynamics-hydrodynamics/kites-wright-brothers?from=Home


Last edit date: 2023-01-21
Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.