1. Are the objective and introduction written in an engaging way? Yes No     If 'No' please explain. characters left 2. Is the difficulty level accurate? Yes No     If 'No' please explain. characters left 3. Were the materials easily obtained? Yes No     If 'No' please explain. characters left 4. Was the procedure clear? Yes No      If 'No' please explain. characters left 5. Were all safety measures included? Yes No      If 'No' please explain. characters left 6. Did you obtain clear, unambiguous results? Yes No     If 'No' please explain. characters left 7. How much time did you spend on the project? Choose One... A day or less Several days About one week A couple weeks Several weeks to months 8. How much did the project cost? Choose One... Less than $20 $20 - $50 $50 - $100 $100 - $150 $150+ Optional:  Do you have any suggestions to improve this project? characters left Optional:  Attach a picture of your project (JPG, JPEG, GIF, PNG only) Optional:  Caption for picture characters left Thank you for your feedback! * Note: This is an abbreviated project idea, without notes to start your background research or a procedure for how to do the experiment. You can identify abbreviated project ideas by the asterisk at the end of the title. If you want a project idea with full instructions, please pick one without an asterisk. Abstract The amount of energy produced by most photovoltaic (solar) panels is limited, due to their immobility. However, when photovoltaic panels track the movement of the Sun, their efficiency increases significantly. This can be done with computers and sophisticated electronics, but for rural or wilderness settings, a "low-tech" sun tracker would be beneficial. A solution exists in nature: the sunflower. The challenge in this science fair project is to design and build a device that imitates the sunflower's ability to continually turn its face toward the Sun. Like the sunflower, your device should not rely on any form of electronics. One way to approach this problem was described by Jonathan T. Ota in his project, Helio Tracker, presented at the 2009 California State Science Fair (CSSF). In Jonathan's design, a parabolic mirror focuses light on a central bottle, shown in Figure 1. Figure 1. Helio tracker. Within the bottle, alcohol absorbs heat and undergoes a phase change to create pressure. The pressure moves through lengths of tubing to one or more pistons. The movement of the pistons causes the face of the "flower" to turn toward the light. You can read about Jonathon's results at the CSSF website. If you like to build things and find this challenging science fair project intriguing, get started building your own helio tracker. Shop for Supplies at Science Buddies Online Store Science Buddies has compiled some suggestions for harder to find items in our Amazon store. The store does not include every item for every project, but it does include items that we feel work for the projects on our website. If you have comments or would like us to add items to the store, please contact us at scibuddy@sciencebuddies.org. Variations For more science project ideas in this area of science, see Mechanical Engineering Project Ideas. Credits Jonathon T. Ota. This science fair project was inspired by the following science fair project, presented at the 2009 California State Science Fair: Ota, Jonathan T. (2009). Helio Tracker. http://www.usc.edu/CSSF/History/2009/Projects/S0217.pdf Last edit date: 2011-01-10 08:00:00

I Did This Project! Tell us about your experience with this science project. What was the most important thing you learned? characters left What problems did you encounter? (Enter "none" if you had none.) characters left Can you suggest any improvements or ideas? (Enter "no" if you have none.) characters left How do you rate this project? Poor OK Good Very Good Excellent Optional:  Attach a picture of your project (JPG, JPEG, GIF, PNG only) Optional:  Caption for picture characters left Thank you for your feedback! Related Links Science Fair Project Guide Project Summary Difficulty  9  Time required Very Long (several weeks to months) Prerequisites Experience designing and building mechanical devices is preferred, or at least the willingness to invest many hours designing, testing, and re-designing. Material Availability You will need a photovoltaic panel, approximately 200 square cm. Cost Average ($50 - $100) Safety No issues Share this Project Idea! Donate to Science Buddies Motorola Solutions Foundation sponsors Summer Science Camp Resource Summer Science Camp Resource

Career Focus

If you like this project, you might enjoy exploring related careers.

	Mechanical Engineer Mechanical engineers are part of your everyday life, designing the spoon you used to eat your breakfast, your breakfast's packaging, the flip-top cap on your toothpaste tube, the zipper on your jacket, the car, bike, or bus you took to school, the chair you sat in, the door handle you grasped and the hinges it opened on, and the ballpoint pen you used to take your test. Virtually every object that you see around you has passed through the hands of a mechanical engineer. Consequently, their skills are in demand to design millions of different products in almost every type of industry.			Mechanical Engineering Technician You use mechanical devices every day—to zip and snap your clothing, open doors, refrigerate and cook your food, get clean water, heat your home, play music, surf the Internet, travel around, and even to brush your teeth. Virtually every object that you see around has been mechanically engineered or designed at some point, requiring the skills of mechanical engineering technicians to create drawings of the product, or to build and test models of the product to find the best design.
	Commercial & Industrial Designer Have you always loved art? Do you have a good eye for beauty, balance, and form? How would you like to see your designs show up in toy stores? Or in a sporting goods store? Or at a car dealer? Commercial and industrial designers create the shape and form of every type of manufactured good that you can think of—from toys, sporting goods, and medical equipment to high technology products, furniture, toothbrushes, and toasters. They design the form of new products that are as beautiful and pleasing to look at as they are functional.			Solar Energy Systems Engineer Does the idea of harvesting the enormous power of the sun interest you? If you find this exciting, then you should think about installing solar photovoltaic panels on your house to collect free electricity from the sun. But how energy efficient is your home already? Can it get better? How many panels would your house need? What would the system look like? You can get the answers to these questions and more from your local solar energy systems engineer. These engineers help their residential and commercial clients save on their electric bills and reduce their carbon footprint by performing energy audits and picking and designing the right solar energy system for them.

Join Science Buddies Become a Science Buddies member! It's free! As a member you will be the first to receive our new and innovative project ideas, news about upcoming science competitions, science fair tips, and information on other science related initiatives. Support Science Buddies If this website has helped you, won't you consider a small gift so we may continue developing resources to help teachers and students?