Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students
Create Assignment

Making Milk Curdle with Pineapple Enzymes

Difficulty
Time Required Long (2-4 weeks)
Prerequisites A familiarity with basic chemistry and experience with simple electronics would be helpful, but is not absolutely required.
Material Availability For your convenience a kit is available for this project from the Science Buddies Store. Time required includes shipping for the kit. For data analysis, a spreadsheet program, such as Google SheetsTM or Microsoft® Excel® is helpful.
Cost Average ($50 - $100)

Abstract

Don't you hate it if you want to pour yourself a cup of milk and all you get is milk clumps? What happened to the milk is called coagulation, which is the mechanism that occurs when proteins in the milk clump together. Without coagulation, or curdling, there wouldn't be any cheese or yogurt which is why it is a very important process in the food industry. But what makes milk curdle? In this science project you will use pineapple juice to curdle milk and measure the coagulation process over time with a self-made turbidity meter.

Objective

Measure how milk curdles when adding pineapple juice with the help of a self-made turbidity meter.

Credits

Svenja Lohner, PhD, Science Buddies
David Whyte, PhD, Science Buddies
  • Google SheetsTM is a registered trademark of Google, Inc.
  • Microsoft® is a registered trademark of Microsoft Corporation.
  • Excel® is a registered trademark of Microsoft Corporation.

Cite This Page

MLA Style

Lohner, Svenja. "Making Milk Curdle with Pineapple Enzymes" Science Buddies. Science Buddies, 23 Aug. 2016. Web. 29 Aug. 2016 <http://www.sciencebuddies.org/science-fair-projects/project_ideas/BioChem_p032/biochemistry/enzymes-milk-curdle.shtml>

APA Style

Lohner, S. (2016, August 23). Making Milk Curdle with Pineapple Enzymes. Retrieved August 29, 2016 from http://www.sciencebuddies.org/science-fair-projects/project_ideas/BioChem_p032/biochemistry/enzymes-milk-curdle.shtml

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.


Last edit date: 2016-08-23

Introduction

Milk is truly a multipurpose liquid. Milk by itself is a healthy and nutrient-rich beverage, but when you start treating milk in various processes, all kinds of other products can be generated such as butter, yogurt, buttermilk or cheese. Milk mostly consists of fat, protein, lactose and water. The fat is suspended in milk water as fine droplets or globules which makes it an emulsion. At the same time there are lots of proteins in milk, mostly whey and casein. As casein is poorly soluble in water, casein proteins build spherical structures, called micelles, that allow them to stay in suspension as if they were soluble. But what does this have to do with milk curdling?

With both, the fat and the proteins in suspension, the milk is a white liquid as we know it. However, the casein micelle structures can easily be disrupted or changed. And once they are altered they cannot be reformed. As the micelle structure is holding the casein protein in suspension, without it, the micelles will aggregate and the casein comes out of solution. The result is a gelatinous material, which is called curd. The process of casein micelle aggregation is also called milk coagulation or curdling and is shown in Figure 1.

Curdling milk for cheese production
Figure 1. Milk coagulation happens when the milk proteins (caseins) clump together. Curdling milk is the first step in cheese production.
(Image by James.folsom at English Wikipedia, via Wikimedia Commons)

Curdling of milk is the starting process for lots of other dairy products such as cottage cheese, ricotta, paneer or cream cheese. This is why in cheese production people want the milk to curdle. There are different ways of inducing milk coagulation. You can do it with either acid or heat, by letting the milk age long enough or with specific enzymes. Enzymes are proteins that are very specific for a certain chemical reaction. Chymosin for example is an enzyme that is derived from rennet and is used for milk coagulation as it specifically alters the casein micelle structure so the milk starts to curdle. Proteases are other enzymes that are able to make milk curdle as they are chopping up other proteins and disrupt the casein micelle structure this way. In this science project you will use fresh pineapple juice to curdle milk. The pineapple contains another enzyme, called bromelain which is a protease enzyme and works great for milk curdling. You will see for yourself in this science project.

One way to monitor your curdling process is by looking at the milk's turbidity. If light is shone through milk, the light beam will bounce of the tiny fat droplets and the casein micelles that are suspended in milk and will be redirected or scattered. This is the reason why milk appears white and is not clear. During curdling, the milk will lose its white color as the casein will fall out of suspension. To assess the milks turbidity, this scattered light can be measured at a 90° angle from the direction of the incoming light. A device that can do that is called a turbidimeter. You will build your own simplified turbidimeter for this science project as shown in Figure 2.

Principle and setup of your self-made turbidimeter.
Figure 2. Principle and setup (not to scale) of your self-made turbidimeter. Some of the incoming light from the white LED is scattered by the fat droplets and casein micelles in the milk, and is then detected by the detector (photoresistor) at an angle of 90° from the initial path of the light beam. The remaining light is transmitted through the liquid and emerges on the opposite side.

Your turbidimeter will consist of a circuit that has a light source (a white light-emitting diode (LED)) and a light detector (a photoresistor). Your milk solution will then be placed between the light source and the detector and your measurement output will be the level of resistance from your detector, measured in ohms (Ω). The photoresistor has a high resistance in the dark, and its resistance decreases as light levels increase. As more light is scattered by your sample, more light reaches the detector, so the resistance decreases. How clear do you think your milk will get when adding fresh pineapple juice?

Terms and Concepts

  • Milk
  • Emulsion
  • Whey
  • Casein
  • Micelle
  • Aggregate
  • Curd
  • Coagulation
  • Enzyme
  • Chymosin
  • Protease
  • Bromelain
  • Turbidity
  • Light scattering
  • Turbidimeter
  • Light-emitting-diode (LED)
  • Photoresistor
  • Resistance, Ohm (Ω)

Questions

  • What are the different components in milk?
  • What is the scientific definition of the word turbidity?
  • How does particle size and the wavelength of light affect light scattering?
  • Is there a linear relationship between particle concentration and intensity of scattered light?
  • During what processes is milk curdling used in the food industry?

Bibliography

News Feed on This Topic

 
, ,
Note: A computerized matching algorithm suggests the above articles. It's not as smart as you are, and it may occasionally give humorous, ridiculous, or even annoying results! Learn more about the News Feed

Materials and Equipment Product Kit Available

These specialty items can be purchased from the Science Buddies Store:
  • Sensors Kit (1). From this you will need:
    • Solderless breadboard (1)
    • Jumper wires (3)
    • Alligator clip leads (2)
    • 9 V battery (1)
    • 9 V battery snap connector (1)
    • Photoresistor (1)
    • High-brightness white LED (1)
    • 220 Ω resistor (1)
    • Digital multimeter

You will also need to gather these items (not included in the kit):

  • Piece of dark (black, brown or dark blue) construction paper
  • Small plastic cups, 3 oz (7), available from Amazon.com
  • Cuvettes 3.5 mL, ideally clear sides (matt or grooved sides are fine, too) (9), available from Amazon.com
  • Milk, fat-free
  • 10 mL graduated cylinder, available from Amazon.com
  • Tap water
  • Spoon
  • Eye dropper or transfer pipettes (9), available from Amazon.com
  • Dim light, such as a nightlight or LED flashlight
  • Fresh or frozen pineapple; do not substitute canned pineapple as it will not work well
  • Cheesecloth; any piece of cotton fabric (even an old cotton T-shirt) can be substituted
  • Food grater
  • Microwave-safe container
  • Heavy bowl or cardboard box to cover the turbidity meter
  • Stopwatch
  • Permanent marker
  • Lab notebook

Recommended Project Supplies

View Kit
Project Kit: $69.95

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Experimental Procedure

Building Your Turbidity Meter

In this section, you will assemble a circuit on a breadboard. If you have never used a breadboard before, you should refer to the Science Buddies resource How to Use a Breadboard before you proceed. You can follow a step-by-step slideshow that will show you how to put components in the breadboard one at a time. Alternatively, Table 1 lists each component and its location on the breadboard. Important: read these notes before you proceed.

  • Resistors are marked with colored bands. These colors do matter. Make sure you pick the right resistors for each step according to the markings.
  • It matters which direction some of the components are facing. Make sure you read the slideshow captions for any special notes about inserting each part.
slideshow blank breadboard slideshow milk curdling 2 slideshow milk curdling 3 slideshow milk curdling 4 slideshow milk curdling 5 slideshow milk curdling 6 slideshow milk curdling 7 slideshow milk curdling 8 slideshow milk curdling 9 slideshow milk curdling 10 slideshow milk curdling 11

slideshow breadboard holder
Click through the slideshow to see the colorimeter procedure.

Part name PictureBreadboard Symbol Location
9 V battery 9V battery breadboard 9v battery symbol Red wire to (+) bus
Black wire to (-) bus
Photoresistor photoresistor breadboard photoresistor symbol F24, F26
White LED white LED from Jameco breadboard LED symbol Long lead to B17
Short lead to D16
Jumper wires (3) black jumper wire breadboard jumper wire black symbol J26 to multimeter
J24 to multimeter
A17 to (+) bus
220 Ω resistor 220 resistor picture 220 resistor breadboard symbol E16 to (-) bus
Table 1. Components for the spectrophotometer circuit (Image credits: Jameco and Fritzing).

Testing the Turbidity Meter

After you finished building your circuit, testing the turbidity meter is necessary to ensure that all the electronic components are connected correctly and your device works as expected. Note: Stray light will cause problems and may result in fluctuating data. Perform the readings in a dimly lit room if stray light is a problem and make sure to always place the cuvettes into your device the same way. If the sides of your cuvettes are not all clear but two of them are grooved or frosted, make sure that the clear side is always facing towards the LED and the frosted or grooved side is facing towards the photoresistor. Place a heavy bowl or cardboard box upside-down over your breadboard during measurement to block out surrounding light. If you get fluctuating data, make sure to check if your cuvettes are free of smears or dirt on the outside and there are no air bubbles sticking to the sides.

  1. Cut a small piece of dark construction paper and roll it into a tube that just fits on the head of the LED. The tube length should be about 2 cm. Place the tube on the head of the LED and attach it with some tape so it is not able to slide off.
  2. Place an empty cuvette upside-down over the photoresistor. Make sure that for this cuvette the clear side faces towards the front of the photoresistor. Bend the photoresistor leads as needed to fit underneath the cuvette. Use tape to hold the cuvette over the photoresistor in place. But do not block the light path!
  3. The light path from the LED and the tube should be exactly aligned with the height of the photoresistor as shown in Figure 3. Bend the wires on the LED and photoresistor for adjustment, if needed.
Make sure the LED is aligned with the photoresistor.
Figure 3. The light path of the LED should be directly aligned with the height of the photoresistor.
  1. Set up the multimeter to measure the resistance of the photoresistor.
    1. Plug the black multimeter probe into the port labeled COM.
    2. Plug the red multimeter probe into the port labeled VΩMA.
    3. Turn the dial setting to 200 kΩ (the green "200 k" at the top of the dial near the Ω symbol).
    4. Make sure you remembered to use the alligator clips to attach the multimeter probes to the jumper wires connected to the photoresistor coming from J24 and J26.
  2. As you connected the jumper wire from A17 to the power (+) bus already, your LED should still be turned on.
  3. Cover the circuit (but not the multimeter) with a heavy bowl to block ambient light.
  4. Read the resistance across the photoresistor and record it in your lab notebook.
    1. Note the units of the resistance. A "k" indicates kilo-ohms (kΩ).
    2. If your multimeter screen displays a "1.", that means the resistance is too high for the dial setting. Turn the dial up to the next highest range (for example, from 200 k to 2000 k) and check again.
    3. If this is your first time using a multimeter, refer to the Science Buddies resource How to Use a Multimeter, specifically the section How do I measure resistance, to learn more.
  5. Remove the bowl and turn off the LED by removing the jumper wire from the power (+) bus.
  6. Cover the circuit with the bowl again. In the dark, the resistance should be in the mega-ohm range. Remember that you may need to adjust the dial setting to get a measurement. Record the resistance in your lab notebook.
  7. Remove the bowl and turn off the multimeter to conserve battery power.

Preparing and Measuring Your Test Samples

In this step, you will measure a range of test solutions on your turbidity meter to demonstrate how different amounts of particles or colloids present in a sample result in different light scattering.

  1. Label six clear mini plastic cups 1 to 6 with the masking tape and permanent marker.
  2. You will make a series of 1:10 dilutions with following contents as shown in Figure 4.:
    1. Water
    2. 100 percent fat-free milk
    3. 1/10 dilution
    4. 1/100 dilution
    5. 1/1,000 dilution
    6. 1/10,000 dilution
Test solutions for measurement.
Figure 4. Test solutions with different dilutions of fat-free milk.
  1. Put 10 mL of water in cup #1 and 10 mL of fat free milk in cup #2.
  2. Put 9 mL of water into cup #3. Add 1 mL of fat free milk. Stir with a clean spoon.
  3. Put 9 mL of water into cup #4. Add 1 mL from cup #3. Stir with a clean spoon.
  4. Repeat the 10-fold dilutions for cups #5 and #6.
  5. Transfer the water and all other solutions into 6 clean and labeled cuvettes. Use an eye dropper, transfer pipette or pour carefully. Note: The cuvettes hold approximately 3 mL of solution. Also, make sure to label the cuvettes at the very top to not cover the light path with your writing.
  6. Now you are ready to measure scattered light from each of your test samples. Move the circuit and the cuvettes to a work area with dim light. There should be just enough light for you to work and to read the multimeter. You could use a nightlight or a red LED flashlight as a work light.
  7. Attach the red and black multimeter probes to the red and black wires in contact with the photoresistor (coming from J24 and J26) using the cables with the alligator clips, if they are not yet connected.
  8. Set the multimeter to read resistance again. Remember that you might have to adjust the range as you take different readings.
  9. First, place your blank sample with only water in the corner between the LED and the photoresistor as shown in Figure 5. Remember to face the clear side of the cuvette with your sample solution towards the LED and the frosted or grooved side towards the photoresistor.
Measuring your samples in the turbidity meter.
Figure 5. Setup of the turbidity meter for measuring your test solutions and milk samples. Note, that in these pictures the LED is switched on but the setup is not covered with a bowl, yet.
  1. Plug in the wire to turn on the LED and cover the breadboard with a bowl. Read the resistance on the multimeter and record the data in your lab notebook.
  2. Remove the blank cuvette and replace it with the cuvette containing the next solution starting with the lowest dilution (1/10,000). Cover the breadboard again with the bowl and write down the resistance for this solution. Continue the measurements for each of your 5 milk solutions.
  3. Repeat steps 11–13 with the entire set of standards including the blank two more times.
  4. Make a data table in your lab notebook, showing the different dilution levels together with all three recorded resistance measurements for each solution. The resistance should be higher as the solutions get less concentrated.

Tracking Milk Curdling

Now that you have a working turbidity meter, you will use it to track the curdling of milk in presence of the proteolytic enzyme bromelain from pineapple juice. As bromelain causes the light-scattering particles in the milk to coagulate, the milk becomes more transparent and therefore scatters less light.

  1. Label three clean cuvettes 1 to 3 with a permanent marker.
  2. Make 50 mL of 10 percent milk by adding 5 mL of milk to 45 mL of water.
  3. Add 3 mL of the 10 percent milk to each cuvette.
  4. Squeeze 20 mL of fresh pineapple juice into a clean container.
    1. To get the pineapple juice, take a fresh pineapple, cut off the rind, and grate the flesh. Place the grated fruit in a piece of cheesecloth and squeeze over a clean container.
    2. Any fresh pineapple fruit will work as will frozen pineapple that has been thawed at room temperature. Canned pineapple or refrigerated pineapple juice does not work as they are heat treated and heat destroys enzymes.
  5. Transfer 10 mL of the juice into a small, microwave-safe container. Microwave the pineapple juice for about 20 seconds, or as long as necessary to get the juice to boil for 3–5 seconds. Heat will destroy enzymes, but won't affect most chemicals. The point is to show that enzymatic activity, which is heat-sensitive, is what causes the milk to clear.
  6. Place the first cuvette with the 10 percent milk in your turbidity meter with the clear side facing towards the LED and the frosted or grooved side towards the photoresistor. Make sure, the device is ready for taking measurements, switching on the LED and setting the multimeter to measure resistance.
  7. Get your stopwatch ready and add 1 or 2 drops of fresh, unheated pineapple juice to the cuvette using an eye dropper or transfer pipette. Immediately start the stopwatch and record the time at which you added the pineapple juice. Note: You may need to change the amount of juice you add, depending on how fast the reaction occurs under your experimental conditions. Add less pineapple juice to get a slower reaction, and more pineapple juice for a faster one.
  8. Place the bowl over the turbidity meter to block surrounding light and measure the amount of scattered light by recording the resistance from the multimeter every 2 minutes for 20 minutes.
  9. Once the 20  minutes are over, remove the cuvette from your turbidity meter and replace it with the second cuvette with 10 percent milk. Repeat the experiment, but this time add the same amount (1 or 2 drops) of the heated, inactive pineapple juice to the cuvette. Again, start the stopwatch once you add the pineapple juice and record the resistance readings every 2 minutes for 20 minutes.
  10. In the next step, use the third cuvette with 10 percent milk and repeat the experiment with no additions to the milk solution. Make sure to record the resistance readings from the multimeter every 2 minutes for 20 minutes.
  11. Finally, repeat each experiment (10 percent milk with the addition of fresh pineapple juice, heated pineapple juice, and no additions), following steps 6–10 two more times.

Analyzing Your Data

  1. Open a spreadsheet and enter your data (the different milk dilutions and the resistance values of these solutions). Calculate the average of your three resistance readings for each test sample.
  2. Graph the average resistance of your three readings (scattered light) on the y-axis versus the dilution of the milk on the x-axis. You will notice that the relationship between measured intensity of scattered light (or the resistance) and milk concentration is nonlinear. You can linearize the data by performing a base-10 logarithmic transformation of your data. Do not include the water sample in these calculations. Now simply graph the average resistance data on the y-axis versus the log10 of the milk dilutions on the x-axis. You should get a linear curve this time.
  3. You can add a trend line to the linearized data and display its equation and its correlation factor R2 to show the correlation between light scattering and the milk (or fat droplet and casein micelle) concentration. How does the light scattering (resistance) change when you dilute the milk?
  4. For each of your test samples (10 percent milk with the addition of fresh pineapple juice, heated pineapple juice, and no additions), enter your resistance data into the spreadsheet and calculate the average of your three readings for each of them.
  5. Graph the average resistance (scattered light) versus time in minutes for each of your samples. If you want, you can use your milk dilution vs. resistance curve to determine the milk dilution factor before and after coagulation for each of your samples. Remember, that the results from your calculations will be the log(milk dilution factor). To get the real milk dilution factor, you have to convert your result from log(milk dilution factor) to milk dilution factor by taking your calculated result from your curve and raise 10 to that number. How does the pineapple enzyme change the light scattering behavior of your milk samples? Do you see a difference between your samples treated with fresh versus heat-inactivated pineapple juice?

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.


Variations

  • Instead of using bromelain from pineapple juice, experiment with different methods to induce milk coagulation. What happens if you change the pH of your milk by adding lemon juice instead of pineapple juice? Do you find other juices or liquids that are also able to curdle milk?
  • Determine how temperature affects the rate of milk clearing by proteases. Use 10 percent milk with active proteases, but heat up or cool down your initial milk sample before you add the pineapple juice. Does the milk curdle faster when it is warm or cold?
  • Change the amount of pineapple juice (proteases) added to the milk. How does this change the milk curdling process?
  • Instead of measuring the amount of scattered light, measure the amount of absorbed light during the milk coagulation process. For this you have to rearrange the breadboard circuit in a way that the photosensor is placed behind the sample cuvette. You might also have to vary the milk dilution factor of your starting sample. Graph absorbed light vs. resistance. Are the results very different compared to measuring scattered light?
  • Measure scattered light in other liquids with suspended particles, such as stomach antacid in water, or water from a local pond. You can also monitor chemical reactions with your self-made turbidity meter. When phosphate (PO43-) and calcium (Ca2+) are mixed in a solution, the insoluble mineral calcium phosphate forms as a white substance that scatters light. Make solutions from antacid tablets (Ca2+) and phosphate-containing fertilizer, and use the sensor to follow the formation of calcium phosphate.

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Ask an Expert

The Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Ask an Expert

Contact Us

If you have purchased a kit for this project from Science Buddies, we are pleased to answer your questions.

In your email, please follow these instructions:
  1. What is your Science Buddies kit order number?
  2. Please describe how you need help as thoroughly as possible:

    Examples

    Good Question I'm trying to do Experimental Procedure step #5, "Scrape the insulation from the wire. . ." How do I know when I've scraped enough?
    Good Question I'm at Experimental Procedure step #7, "Move the magnet back and forth . . ." and the LED is not lighting up.
    Bad Question I don't understand the instructions. Help!
    Good Question I am purchasing my materials. Can I substitute a 1N34 diode for the 1N25 diode called for in the material list?
    Bad Question Can I use a different part?

Contact Us

Related Links

If you like this project, you might enjoy exploring these related careers:

electrical engineer aligning laser

Electrical & Electronics Engineer

Just as a potter forms clay, or a steel worker molds molten steel, electrical and electronics engineers gather and shape electricity and use it to make products that transmit power or transmit information. Electrical and electronics engineers may specialize in one of the millions of products that make or use electricity, like cell phones, electric motors, microwaves, medical instruments, airline navigation system, or handheld games. Read more
scientist performing experiments

Biochemist

Growing, aging, digesting—all of these are examples of chemical processes performed by living organisms. Biochemists study how these types of chemical actions happen in cells and tissues, and monitor what effects new substances, like food additives and medicines, have on living organisms. Read more
Electrical Engineering Tech - old img019

Electrical Engineering Technician

Electrical engineering technicians help design, test, and manufacture electrical and electronic equipment. These people are part of the team of engineers and research scientists that keep our high-tech world going and moving forward. Read more
food science technician checking an egg

Food Science Technician

Good taste, texture, quality, and safety are all very important in the food industry. Food science technicians test and catalog the physical and chemical properties of food to help ensure these aspects. Read more

News Feed on This Topic

 
, ,
Note: A computerized matching algorithm suggests the above articles. It's not as smart as you are, and it may occasionally give humorous, ridiculous, or even annoying results! Learn more about the News Feed

Looking for more science fun?

Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.

Find an Activity