Home Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Rubbing Up Against Static Electricity

Time Required Very Short (≤ 1 day)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety No issues


A tried and true balloon activity is to rub a balloon on your head to make your hair stand up. How does the rubbing build up static electricity? Do this experiment to see if the number of rubs makes a difference.


In this experiment you will test if the number of rubs of wool on a balloon increases or decreases how long the static charge will last.


Sara Agee, Ph.D., Science Buddies

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Last edit date: 2013-01-10


Static electricity is the build-up of electrical charge in an object. Sometimes static electricity can suddenly discharge, like when a bolt of lightning flashes through the sky. Other times, static electricity can cause objects to cling to each other, like socks fresh out of the dryer. The static cling is an attraction between two objects with different charges, positive (+) and negative (−).

You can create static electricity by rubbing one object against another object. The rubbing produces friction which releases negative charges, called electrons, that build up to produce a static charge. When you shuffle your feet across a carpet the friction causes a static charge to build up inside of you. You can suddenly discharge this static electricity when you touch a friend to send them a shock. When you rub a balloon on your head the friction causes opposite static charges to build up in your hair and in the balloon. You can see these two opposite static charges attracting each other when you pull the balloon slowly away from your head making your hair stand up.

Girl with static hair and balloon
Static electricity makes your hair stand up! (NASA, 2004)

In this experiment you will test if the number of rubs can change how long the static charge will last by rubbing a balloon with wool and timing how long it will cling to a wall. By doing this experiment you can investigate how to create static electricity and how static charge is affected by friction.

Terms and Concepts

To do this type of experiment you should know what the following terms mean. Have an adult help you search the Internet, or take you to your local library to find out more!

  • static electricity
  • static charge
  • attraction
  • friction


  • How does friction produce static electricity?
  • How is static electricity related to charge?
  • How can you measure static electricity?


Materials and Equipment

  • balloon
  • woolly sweater, scarf, or blanket
  • stopwatch
  • notebook and pencil
  • graph paper

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Experimental Procedure

  1. For this experiment, you will need a data table for your results. You will need one data table for each trial, so make at least three data tables for doing at least three separate trials. A sample data table looks like this:

    Trial Number of Rubs Stays on Wall? (Y/N) Time on Wall (seconds)

  2. Blow up the balloon and tie off the end.
  3. Rub the balloon on the scarf once, in one direction.
  4. Hold the balloon up on the wall, start the stop watch and release. Does it stay on the wall? If not, stop your stop watch and write "0 seconds" in your data table.
  5. Touch the balloon to a metal object. This should discharge any extra electrons into the metal.
  6. Repeat steps 3 to 5, increasing the number of rubs each time until the balloon sticks to the wall. When you increase the number of rubs do not rub the balloon back and forth, rub the balloon in the same direction each time.
  7. When the balloon does stick to the wall, keep the stop watch going until the balloon falls off of the wall. When it does, stop the stop watch and write the time in the data table next to the matching number of rubs.
  8. Repeat step 7, increasing the number of rubs each time and recording the amount of time the balloon sticks to the wall with the stop watch. Write the results in the data table each time.
  9. Make a graph of your results. A line graph is the best type of graph for this experiment. Make a scale on the left side of the graph (Y-axis) for the number of rubs, and a scale on the bottom of the graph (X-axis) for the time in seconds. For each point of data, make a dot where the number of rubs and the time in seconds intersect.
  10. Does your data make a line? Does the line go up or down? Does the line level off at some point, or keep going? Does the time the balloon stays on the wall increase or decrease with the number of rubs?
  11. You can repeat the experiment a few more times and graph the results. Does the data for each trial match with the previous trials?

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.


  • Does rubbing in one direction give a different result than rubbing back and forth? Try a different experiment comparing the same number of rubs in one direction compared to back and forth. Does one stay up on the wall longer than the other?
  • Static electricity is not good when it gets in your clothes! How do dryer sheets work? Try an experiment rubbing the balloon with a dryer sheet (like Bounce) after rubbing against the wool. What happens to the static cling? Can you rub different times, measure the results and make a graph? If you can, you can make a graph to compare the results of different products. How do they compare? Do they take the same number of rubs to reduce the static cling? Which brands are most effective?
  • Try comparing the effectiveness of different materials for producing a static charge. Does rubbing wool work better than rubbing silk? Design an experiment. to test several different materials: silk, wool, nylon, polyester, plastic, metal, etc.
  • For a more advanced experiment, try investigating static electricity in different conditions, temperatures and humidities (Brynie, 2005).

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Ask an Expert

The Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Ask an Expert

Related Links

If you like this project, you might enjoy exploring these related careers:

Female physicist working


Physicists have a big goal in mind—to understand the nature of the entire universe and everything in it! To reach that goal, they observe and measure natural events seen on Earth and in the universe, and then develop theories, using mathematics, to explain why those phenomena occur. Physicists take on the challenge of explaining events that happen on the grandest scale imaginable to those that happen at the level of the smallest atomic particles. Their theories are then applied to human-scale projects to bring people new technologies, like computers, lasers, and fusion energy. Read more
NASA material scientist

Materials Scientist and Engineer

What makes it possible to create high-technology objects like computers and sports gear? It's the materials inside those products. Materials scientists and engineers develop materials, like metals, ceramics, polymers, and composites, that other engineers need for their designs. Materials scientists and engineers think atomically (meaning they understand things at the nanoscale level), but they design microscopically (at the level of a microscope), and their materials are used macroscopically (at the level the eye can see). From heat shields in space, prosthetic limbs, semiconductors, and sunscreens to snowboards, race cars, hard drives, and baking dishes, materials scientists and engineers make the materials that make life better. Read more