Jump to main content

Heavy Metals and Aquatic Environments

1
2
3
4
5
205 reviews

Abstract

You might know that lead can be toxic, and that you can get lead poisoning from eating or inhaling old paint dust. Lead is called a heavy metal, and there are other sources of heavy metals that can be toxic, too. Silver, copper, mercury, nickel, cadmium, arsenic, and chromium are all heavy metals that can be toxic in certain environments. In this experiment, find out if one common heavy metal, copper, can be toxic to an aquatic environment.

Summary

Areas of Science
Difficulty
 
Time Required
Average (6-10 days)
Prerequisites
The copper sulfate pentahydrate used in this project requires special disposal. Create a disposal plan before starting this project. See the end of the Procedure for more details.
Material Availability
Items are available from Approved Supplier Carolina Biological Supply Company. See the Materials section for details.
Cost
Average ($50 - $100)
Safety
This project requires adult supervision when handling and measuring copper sulfate granules. Wear gloves and safety goggles when measuring. Dispose of the copper sulfate pentahydrate solutions and leftover granules according to local pesticide disposal regulations.
Credits

Damon Kawamoto, Science Buddies Summer Science Fellow, 2011

Teisha Rowland, Ph.D., and Sara Agee, Ph.D., Science Buddies

Objective

In this experiment you will test the effects of the heavy metal copper (Cu) on an aquatic environment containing snails and plants.

Introduction

You might know that lead can be toxic, and that you can get lead poisoning from eating or inhaling old paint dust. Lead is called a heavy metal, and there are other sources of heavy metals that can be toxic, too. Silver, copper, mercury, nickel, cadmium, arsenic, and chromium are all heavy metals that can be toxic in certain environments.

"Toxic metals, including "heavy metals," are individual metals and metal compounds that have been shown to negatively affect people's health. In very small amounts many of these metals are necessary to support life. However, in larger amounts, they become toxic. They may build up in biological systems and become a significant health hazard." (OSHA, 2004)

In this science fair project, you will find out if one common heavy metal, copper (Cu), can be toxic to an aquatic environment. You will use copper because it is one of the heavy metals that is easy to find and it is not very toxic to humans. You will use copper sulfate as a source of copper that is soluble, meaning it will dissolve, or turn into a solution, when mixed with water.

The amount of an ion in solution is often measured in parts per million (ppm). This means that if there is 1 ppm ion in solution, then there is 1 milligram (mg) of the ion present in each liter (L) of solution. Heavy metals release free ions in solution that are very potent, and can cause an effect at very low doses.

In this project, a good range of concentrations to test your copper solutions at is 0 ppm (no copper sulfate added) to 0.4 ppm (with increments of 0.1 ppm). These are very low concentrations so it takes some careful planning to make the solutions. We will show you here how to make a copper ion solution with the lowest ion concentration you will be testing: 0.1 ppm.

Making a copper sulfate solution with a concentration of 0.1 ppm means that you will need 0.1 mg of the copper sulfate in one liter of water. However, it is very difficult to measure 0.1 mg. To give some perspective, a new U.S. dollar bill weighs 1 g. If a dollar bill were cut into 1,000 pieces, each piece would weigh 1 mg. If each of those pieces were further cut into ten pieces, cutting the dollar bill into a total of 10,000 pieces, then each piece would weigh 0.1 mg. This is the amount of copper sulfate needed in one liter of water to make a 0.1 ppm solution. It should now be clear why it would be hard to accurately weigh out something this small!

This is why we need another way to make a copper solution with a concentration of 0.1 ppm. Specifically, you will be making a solution that is at a much higher concentration than you will be testing, called a stock solution, and then you will be diluting the stock solution to create the concentrations you want to test.

First, 1 gram (g) of copper sulfate will be weighed out and mixed with 2 liters (L) of water. This can be written as:

1 g copper sulfate
2 L water

This means that 0.5 g (or 500 mg) of copper sulfate will be dissolved into 1 L of water, creating a copper solution with a concentration of 500 ppm. How are we going to decrease the concentration even more? We can take one drop of this solution and dilute it with more water. There are about 20 drops of water in 1 milliliter (mL). Knowing this, we can figure out how much copper sulfate will be in one drop of water using the following calculation:

(
1 g copper sulfate
2 L water
)
(
1 L water
1000 ml water
)
(
1 ml water
20 drops water
)
  =  
(
.000025 g copper sulfate
1 drop water
)

This tells us that there is 0.000025 grams (which equals 0.025 mg) of copper sulfate in one drop of water. This means that four drops of water have 0.1 mg of copper sulfate. Because a 0.1 ppm solution is 0.1 mg dissolved in 1 L water, if we mix four drops of the 500 ppm copper sulfate solution (0.1 mg) with 1 L of water, we will have a copper sulfate solution with a concentration of 0.1 ppm.

The 0.1 ppm copper sulfate solution will be the lowest concentration of copper that you will test in your experimental aquatic environments. You will add increasing amounts of copper (by adding additional drops) to the experimental environments to test effects of increased concentrations of copper. After each experimental environment has had copper added to it, you will add a number of aquatic organisms, specifically duckweed and snails, to each environment. How will adding copper affect the organisms in each environment?

Terms and Concepts

To do this type of experiment you should know what the following terms mean. Have an adult help you search the internet, or take you to your local library to find out more!

Questions

Bibliography

This project was adapted from the Duckweed Bio-Assay protocol from Cornell University:

These resources describes health issues related to heavy metals:

At this site, you can find out the toxicity of different chemical compounds:

  • Habeck, M., 2006. Toxics, Eco-USA.net. Retrieved July 3, 2006.

Heavy metals are often used in agriculture as pesticides. Learn more about pesticide use and ecotoxicity from the Pesticide Action Network (PAN):

Materials and Equipment

Disclaimer: Science Buddies participates in affiliate programs with Home Science Tools, Amazon.com, Carolina Biological, and Jameco Electronics. Proceeds from the affiliate programs help support Science Buddies, a 501(c)(3) public charity, and keep our resources free for everyone. Our top priority is student learning. If you have any comments (positive or negative) related to purchases you've made for science projects from recommendations on our site, please let us know. Write to us at scibuddy@sciencebuddies.org.

Experimental Procedure

  1. Rinse each container thoroughly with water. Do not use soap because it can coat the plastic container and may be harmful to the organisms in your experiment.
  2. Prepare the stock copper solution. A stock solution is a solution that is at a higher concentration than you use in your tests, and it is used to make solutions with lower concentrations (the concentrations you want to test).
    1. Label the 1 gallon milk container "Copper sulfate solution (500 ppm)" using the permanent marker. Add 2 L of bottled water to the 1 gallon milk container.
    2. Put on safety goggles and gloves. Take the copper sulfate, the 1 gallon milk container with the water, and the scale to a well-ventilated area.
    3. Lay a piece of scratch paper on the scale. Being careful not to let the copper sulfate touch your bare skin or the scale (it can touch the paper), measure out 1 gram of copper sulfate.
    4. Carefully create a funnel using the scratch paper to pour the copper sulfate into the 1 gallon milk container with the water. Secure the lid on the container and carefully shake it until the copper sulfate dissolves.
      • The copper sulfate may take a couple of minutes to dissolve in the water.
  3. You will be creating six experimental aquatic environments, and each one will have a different concentration of copper ions in it, as shown in Table 1. Using the permanent marker, label each of the 5 cup plastic containers with the concentration of the copper ion solution you will put in it (in ppm).


Water in Each Plastic Container (mL) Drops of Copper Sulfate Solution to Add (500 ppm) Total Copper Ion Concentration in the Plastic Container (ppm)
1,000 ml 0 0 ppm
1,000 ml 4 0.1 ppm
1,000 ml 8 0.2 ppm
1,000 ml 12 0.3 ppm
1,000 ml 16 0.4 ppm
Table 1. You will be creating five experimental aquatic environments and testing the effects of increasing concentrations of copper on each environment.

  1. Add 1000 ml (1 L) of water to each plastic container.
  2. To each plastic container, add drops of the copper sulfate solution (500 ppm) according to Table 1 above. Add the solution slowly, one drop at a time.
  3. Add at least three snails (more would be better as it would provide more robust data; make sure to keep the number constant between test conditions) to each container, making sure that they are right side up at the bottom of the container. This will help you see if they are alive or not.
  4. Put 10 duckweed plants into each container. Make sure that each duckweed plant has a stem (the part sticking down) and exactly two leaves (the part that floats).
    1. You will be counting the number of leaves on each duckweed plant to see if it grows new leaves over time or not.
  5. For each container, record the number of snails in it and the total number of leaves on the duckweed plants in it (this should be 20 for the first day).
  6. Observe the animals every day for 5 days and write down your observations in your lab notebook in data tables like Tables 2 and 3. For each observation, count the number of snails that are still alive and the total number of leaves on the duckweed plants in each container.


Copper Sulfate Concentration Number of Snails Living
Day 1 Day 2 Day 3 Day 4 Day 5
0 ppm          
0.1 ppm          
0.2 ppm          
0.3 ppm          
0.4 ppm          
Table 2. Record the number of snails living in each container over five days in a data table like this one.


Copper Sulfate Concentration Number of Leaves on the Duckweed Plants
Day 1 Day 2 Day 3 Day 4 Day 5
0 ppm 20        
0.1 ppm 20        
0.2 ppm 20        
0.3 ppm 20        
0.4 ppm 20        
Table 3. Record the total number of leaves on the duckweed plants in each container over five days in a data table like this one. On the first day, this should be 20 for each container.

  1. Make graphs of your results
    1. On the bottom (x-axis) of the graphs, put the concentration of copper (in ppm), and on the left (y-axis) of the graphs put the number of snails living, for graph number 1, or the total number of leaves on the duckweed plants, for graph number 2, at the end of the experiment (Day 5).
    2. Also make graphs of the snails and leaves over time. Put the time (in days) on the X-axis and either the number of snails living, for graph number 3, or the total number of leaves on the duckweed plants, for graph number 4, on the Y-axis.
  2. Examine your graphs. What effect did the arsenic have on the snails? What about on the duckweed? How did the arsenic concentration impact the effect?
  3. As you may see from your own data, copper pentahydrate sulfate needs to be disposed of responsibly. Dispose of it according to your local guidelines for pesticide disposal.
icon scientific method

Ask an Expert

Do you have specific questions about your science project? Our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Global Connections

The United Nations Sustainable Development Goals (UNSDGs) are a blueprint to achieve a better and more sustainable future for all.

This project explores topics key to Life Below Water: Conserve and sustainably use the oceans, seas and marine resources.

Variations

  • Some water plants can remove contaminating heavy metals from aquatic environments. Others are poisoned by them. Do an experiment comparing different species of aquatic plants for this ability. Use a copper test kit to test the water each day after the plants have been added.
  • We used copper sulfate because it is highly soluble. Can other sources of copper be a problem? Try other sources of elemental copper, like pipes, wires, and metal sheets. Also try other metal products that are weak toxins, like aluminum (foil, cans) or zinc (coins, wires). Are any of these common sources of metals toxic to aquatic life? It is important not to do experiments with lead or mercury, because they can be very toxic and cause developmental defects in children.
  • Try these other Science Buddies experiments to test the effects of toxins on aquatic environments:

Careers

If you like this project, you might enjoy exploring these related careers:

Career Profile
Do you enjoy going to the ocean? Do you like examining all of the marine creatures in tide pools? Do you read up on the different kinds of ocean mammals and fish for fun? If this is the case, then you may be the right fit for a career as a marine biologist. Marine biology is the study of ocean aquatic organisms, their behaviors, and their interactions with the environment. Because this field of study is an intersection of zoology, biology, and technology, marine biologists can apply their… Read more
Career Profile
Have you ever noticed that for people with asthma it can sometimes be especially hard to breathe in the middle of a busy city? One reason for this is the exhaust from vehicles. Cars, buses, and motorcycles add pollution to our air, which affects our health. But can pollution impact more than our health? Cutting down trees, or deforestation, can contribute to erosion, which carries off valuable topsoil. But can erosion alter more than the condition of the soil? How does an oil spill harm fish… Read more
Career Profile
Walk by the supermarket's fresh fish counter and you will see a collection of marine ambassadors from around the world. You might see shrimp from Thailand, salmon from Canada, and flounder from the United States of America. Some of the fish is wild, caught by fishermen from the open seas; but these days, a lot of fish and shellfish is farm raised. Aquacultural managers direct operations on farms and fish hatcheries that cultivate ocean and freshwater fish for human consumption, recreation, and… Read more
Career Profile
A summer day at the beach can be very relaxing. The sand is warm and the waves lap gently on the shore. But beneath the water's surface is a world that is teeming with rich plant and animal life. For many of us, it isn't possible to experience this world firsthand. But at a public aquarium, we can take a peek and examine close up the beautiful fish and coral. An aquarist cares for the animal and plant life that you see in those aquarium displays. Aquarists make sure that all of the animals and… Read more

News Feed on This Topic

 
, ,

Cite This Page

General citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.

MLA Style

Science Buddies Staff. "Heavy Metals and Aquatic Environments." Science Buddies, 9 Dec. 2023, https://www.sciencebuddies.org/science-fair-projects/project-ideas/EnvSci_p018/environmental-science/heavy-metals-and-aquatic-environments?from=Blog. Accessed 19 Mar. 2024.

APA Style

Science Buddies Staff. (2023, December 9). Heavy Metals and Aquatic Environments. Retrieved from https://www.sciencebuddies.org/science-fair-projects/project-ideas/EnvSci_p018/environmental-science/heavy-metals-and-aquatic-environments?from=Blog


Last edit date: 2023-12-09
Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.