Related Links

• Science Fair Project Guide

Project Summary

Difficulty	4
Time required	Short (several days)
Prerequisites	None
Material Availability	Readily available
Cost	Very Low (under $20)
Safety	If you have an allergy to wheat, you should not do this science fair project.

Donate to Science Buddies

Internet Safety Tips

Get educated about online safety with help from Symantec. symantec.com/norton/familyresources

Abstract

Objective

To determine the relative differences in gluten content between different types of flour.

Introduction

Breads, bagels, pastas, cakes, cookies, crackers, muffins, pastries, pies, and pizza crusts. Are you hungry yet? What do all these foods have in common? Traditionally, they are all made from wheat flour, the fine powder made from grinding and sifting kernels of wheat, which are the edible part, or fruit, of the wheat plant. Wheat is one of a small number of cereal grains that comes from the 8,000 species of plants in the grass family. It first grew wild on the high plains of the Near East, and then about 12,000 to 14,000 years ago, people first began to cultivate it. Today, it is the second most cultivated cereal grain in the world (corn is first, and rice is third).

Figure 1. This drawing shows wheat, from the grass family of plants.

Why is wheat flour so popular? Well, when you mix most other flours (like those made with the cereal grains mentioned above) with water, what you get is a ball of paste that sort of sits there. Mix wheat flour with water, though, and gradually, under repeated pressure, it transforms into something quite lively. It is both plastic (can change its shape), and elastic (bounces back and returns to its original shape). These unique qualities allow wheat dough to trap gas inside and expand, kind of like a balloon, but not to the point of breaking. The gas comes from tiny plants called yeast, which give off carbon dioxide. The gas can also come from the combination of acids and bases in the dough. This expansion of the dough helps breads and other baked goods rise and become light and fluffy.

The plasticity and elasticity are made possible by the presence of an amazing composite of proteins within the wheat kernel, called gluten. These proteins in gluten are long chains of amino acids, some of the longest in the world, in fact, with chains around 1,000 amino acids long! The two major proteins in gluten are called gliadins and glutenins. The gliadins (think of the word "glide") give the gluten its plasticity because they act kind of like ball bearings or a lubricant. They allow the other major protein, the chains of glutenins, to slide past each other without forming bonds. You can think of the glutenin molecules as long spring-like chains. As the dough is worked and kneaded, these glutenin molecules can link up with each other, end to end, to form super-long, spring-like chains. This makes a tight, coiled mesh, or net, called "the gluten," to trap the gas in, and this gives the dough its elasticity. All those springs want to "spring back" when they are stretched!

Gluten is also available in a few other cereal grains, notably rye and barley, but in lesser quantities than in wheat. Wheat flours also vary in the amount of gluten they contain. Hard wheat is high in gluten and is good for baking things that need toughness and strength, like yeasty breads, bagels, and puff pastries. Soft wheat is low in gluten (high in starch) and is better for baked goods that need to be tender, like pancakes, cookies, and pastries.

Besides the type of flour that a baker chooses, he or she can also control the gluten strength by manipulating the dough, or by adding other substances to the dough. For example:

• Kneading or stirring the dough strengthens and organizes the gluten mesh.
• Adding salt also greatly strengthens the gluten mesh.
• Adding sugar limits the development of gluten.
• Adding acids weakens the gluten mesh.
• Adding fats weakens the gluten.

Legend has it that gluten was first discovered in the 7th century by Chinese Buddhist monks who were looking for a substitute for meat in vegetarian cooking. When a ball of wheat dough is placed in a bowl of cold water and then kneaded, the starch in the dough gradually falls away and dissolves in the water, leaving behind a stringy, insoluble ball, most of which is gluten. The Chinese people call it "the muscle of flour." This high-protein mass can then be cut into pieces and fried, steamed, or baked. It has a chewy, meat-like texture. Even today, on a commercial scale, this cold-water rinse-and-knead method is the process by which gluten is commonly extracted from wheat flour. It is also the gooey, sticky process you will use to find out which types of wheat flour contain the most and the least gluten. You'll discover that gluten comes from the Latin word for glue for good reason!

Terms, Concepts and Questions to Start Background Research

• Wheat
• Flour
• Kernel
• Fruit (of a wheat plant)
• Cereal grain
• Grass family
• Cultivate
• Plastic
• Elastic
• Yeast
• Carbon dioxide
• Acid
• Base
• Composite
• Protein
• Gluten
• Amino acid
• Gliadin
• Glutenin
• Bond
• Hard wheat
• Soft wheat
• Starch
• Knead
• Insoluble

Questions

• What are the properties of gluten, and what proteins within gluten are responsible for those properties?
• How can a baker control the strength of gluten?
• What are the different types of flour and what kinds of baked goods are they best for?

Bibliography

• McGee, Harold. On Food and Cooking. New York, NY: Scribner, 2004.

This source describes the physical properties of gluten, where it is found, how it is used, and the health concerns associated with it:

• Wikipedia Contributors. (2008, September 14). Gluten. Wikipedia: The Free Encyclopedia. Retrieved September 24, 2008, from http://en.wikipedia.org/w/index.php?title=Gluten&oldid=238290563

This source describes the many types of flours, and their relative gluten content:

• Wikipedia Contributors. (2008, September 23). Flour. Wikipedia: The Free Encyclopedia. Retrieved September 24, 2008, from http://en.wikipedia.org/w/index.php?title=Flour&oldid=240468848

Materials and Equipment

• Flours, made from wheat, such as whole wheat bread flour, pastry flour, cake flour, or all-purpose flour (3 different types)
• Small mixing bowls (3)
• Sticky notes
• Measuring cup, 1-cup size
• Fork
• Cutting board or work surface
• Clock or watch
• Strainer
• Ruler
• Lab notebook

Experimental Procedure

1. Select three different types of wheat flour and with the measuring cup, measure out 1 cup of each type of flour into small mixing bowls, as shown in Figure 2. Examine the flours and note any differences in color and feel. Write down your observations in your lab notebook.
2. If you have trouble telling the flours apart, then label your bowls with sticky notes to identify what type of flour is inside.

Figure 2. This photo shows three examples of different types of wheat flour.

3. Select one bowl to begin with, and slowly add 1/2 cup to 3/4 cup of tap water to the bowl, while carefully stirring with a fork, as shown below. It will seem difficult to stir at first, but will gradually begin to come together to form a rough ball.

Figure 3. This photo shows the gradual addition of water to the flour, while stirring with a fork to form a rough ball.

4. Sprinkle a spoonful of flour (of the type you are working with) onto a work surface, and onto your hands as well, so that both are lightly dusted with flour. Place the ball of flour onto your work surface and knead it for approximately 5-7 minutes, until it becomes smooth and elastic. Use a clock or watch to keep track of the approximate time you spent kneading. Note the amount of time you spent kneading in your lab notebook so you can knead for the same amount of time in later trials. If you are unfamiliar with kneading, this is the process of pressing down on the dough ball with your palms, and then pulling it back up again and rotating it slightly with your fingertips. This cycle is repeated over and over again.

Figure 4. These photos show the pushing and pulling process of kneading.

5. Repeat steps 3–4 for your other two bowls of flour. Be sure to knead all the flours for the same amount of time. At the end of the kneading process, you should have three smooth-looking elastic balls of dough.
6. Place your three balls of dough back in their small bowls and let them rest and relax for about 10 minutes.

Figure 5. This photo shows how the balls of dough will look after kneading.

7. Now it's time to find out how much gluten is inside those balls of dough. If you thought kneading was icky and gooey, brace yourself for the next step! Place your strainer in the sink. Some strainers are "stand-alone," meaning they have legs to support them inside the sink, while others need to be placed over a bowl or propped against the edge of the sink. Either way, make sure your strainer is over a sink where the faucet can reach it.
8. Take one of the balls of dough to the sink and cup it in your hands over the strainer. Let cold water run on it as you gently pull and stretch it apart, as shown below. The water will wash away the water-soluble parts, like the carbohydrates, but will leave behind the insoluble protein, the gluten, that you developed while you were kneading. The starch that is being washed away will look like a milky liquid. Continue rinsing your ball of dough until very little milky liquid is coming out and only a sticky, stringy ball remains.

Figure 6. These photos show how to rinse off the ball of dough inside a strainer.

9. Rinse off your strainer to remove any debris, and repeat step 8 for the other two balls of dough. At the end of the rinsing process, you should have three balls of gluten.
10. Measure the diameter of each ball of gluten with a ruler. Record your measurements in a data table, like the one below, in your lab notebook.

Figure 7. This photo shows the measurement of the diameter of one ball of gluten.

11. Repeat steps 1–10 two more times so that you have a total of three trials for the three different types of flour.
12. Average the diameters of your balls of gluten for each type of flour and record the averages in your data table. Which type of flour produced the smallest diameter gluten ball, on average? Which produced the largest? Does this make sense based on the type of foods that each flour is used to create?

Gluten Ball Diameter Data Table

Variations

• Use a kitchen scale to evaluate the gluten balls, based on weight, rather than diameter.
• Choose one type of flour and create three equally sized balls of dough from it with different degrees of kneading: no kneading, 5 minutes of kneading, and 10 minutes of kneading. Rinse the three balls of dough and evaluate the gluten balls that are created, either by weight or by diameter.
• Select one type of flour and make doughs with different additives, such as salt, sugar, or oil. Compare the development of gluten within these doughs.

• For more science project ideas in this area of science, see Cooking & Food Science Project Ideas.

Credits

Kristin Strong, Science Buddies

This science fair project follows many of the materials and part of the procedure outlined at the following source:

• Exploratorium Contributors. Goodness Gracious! Great Ball of Gluten! The Exploratorium. Retrieved September 21, 2008, from http://www.exploratorium.edu/cooking/bread/activity-gluten.html

Last edit date: 2008-11-26 10:41:00

Career Focus

If you like this project, you might enjoy exploring careers in Cooking & Food Science.

	Food Science Technician Good taste, texture, quality, and safety are all very important in the food industry. Food science technicians test and catalog the physical and chemical properties of food to help ensure these aspects.			Food Scientist or Technologist There is a fraction of the world's population that doesn't have enough to eat or doesn't have access to food that is nutritionally rich. Food scientists or technologists work to find new sources of food that have the right nutrition levels and that are safe for human consumption. In fact, our nation's food supply depends on food scientists and technologists that test and develop foods that meet and exceed government food safety standards. If you are interested in combining biology, chemistry, and the knowledge that you are helping people, then a career as a food scientist or technologist could be a great choice for you!

Join Science Buddies Become a Science Buddies member! It's free! As a member you will be the first to receive our new and innovative project ideas, news about upcoming science competitions, science fair tips, and information on other science related initiatives. Support Science Buddies If this website has helped you, won't you consider a small gift so we may continue developing resources to help teachers and students?