Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Ocean Currents: Modeling the 'Global Conveyor Belt' in Your Kitchen

Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety Adult supervision is required. Use caution when working with the lighter or matches.


Ocean currents have a profound effect on the climates of the continents, especially those regions bordering on the ocean. The Gulf Stream makes northwest Europe much more temperate than any other region at the same latitude, and the California Current keeps Hawaii cooler than other land masses at the same latitude. In this ocean science fair project, you will model the behavior of these "rivers" of hot and cold water within the ocean to find out how temperature affects the currents' velocity.


To make a model of ocean currents and measure how the heat input affects velocity of the currents.


David Whyte, PhD, Science Buddies

Braile, L.W. (2000). Thermal Convection and Viscosity of a Fluid. Retrieved October 15, 2008, from http://web.ics.purdue.edu/~braile/edumod/convect/convect.htm

  • Sterno® is a registered trademark of The Sterno Group LLC.

Cite This Page

MLA Style

Science Buddies Staff. "Ocean Currents: Modeling the 'Global Conveyor Belt' in Your Kitchen" Science Buddies. Science Buddies, 22 Oct. 2014. Web. 26 Jan. 2015 <http://www.sciencebuddies.org/science-fair-projects/project_ideas/OceanSci_p012.shtml?from=Blog>

APA Style

Science Buddies Staff. (2014, October 22). Ocean Currents: Modeling the 'Global Conveyor Belt' in Your Kitchen. Retrieved January 26, 2015 from http://www.sciencebuddies.org/science-fair-projects/project_ideas/OceanSci_p012.shtml?from=Blog

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Last edit date: 2014-10-22


Ocean currents profoundly affect the weather, marine transportation, and the cycling of nutrients. Deep-ocean currents are driven by differences in the water's density. The water's density is controlled by temperature (cold water is denser than warm water) and salinity (salty water is denser than fresh water).

Deep-ocean currents are initiated in Earth's polar regions. Water flowing into the polar regions becomes cold, which increases its density. As ice is formed when the water freezes, freshwater is removed from the ocean (it has turned into ice), making the ocean water saltier. The cold water is now more dense, due to the added salts, thus it sinks toward the ocean bottom. Surface water then moves in to replace the sinking water, thus creating a current.

A global "conveyor belt" is set in motion when deep water forms in the North Atlantic, sinks, moves south, and circulates around Antarctica, and then moves northward to the Indian, Pacific, and Atlantic basins. A simplified version of the global conveyor belt is shown in Figure 1, below. It can take 1,000 years for water from the North Atlantic to find its way into the North Pacific!

A map showing the global conveyor belt
Figure 1. This is a simplified version of the global conveyor belt. (Image credits: US Global Change Research Program, Thomas Splettstoesser)

The global conveyor belt moves water slowly, 10 centimeters (cm) per second (sec) at most, but it moves a lot of water. One hundred times the amount of water that is in the Amazon River is transported by this huge, slow circulation pattern. The water moves mainly because of differences in relative density, which you will explore in this science fair project. In this science project, you will model ocean currents, with particular focus on the role of heat in the currents' velocity.

Terms and Concepts

  • Deep-ocean currents
  • Density
  • Salinity
  • Global conveyor belt
  • Velocity
  • Convection
  • Convection cells


  • What types of currents are present in the ocean?
  • How do ocean currents affect the weather?
  • What is the role of ocean currents in distributing nutrients?
  • From where does the energy that drives ocean currents come?


News Feed on This Topic

, ,
Reading level:
Note: A computerized matching algorithm suggests the above articles. It's not as smart as you are, and it may occasionally give humorous, ridiculous, or even annoying results! Learn more about the News Feed

Materials and Equipment

  • Glass bread loaf dish, 1.5-qt.
  • Thyme, dried (or any other dried leaf spice) (2 tsp.)
  • Teaspoon
  • Vegetable oil (about 4 cups)
  • Measuring cup
  • Spoon
  • Ceramic coffee mugs (2). These should be equal in height.
  • Small candles or cans of Sterno® (4). These should be much shorter than the coffee mugs so that the flame does not get too close to the bottom of the glass bread loaf dish.
  • Lighter or matches
  • Paper for sketching
  • Thermometer, like the one available from Carolina Biological catalog #745390.
  • Ruler
  • Stopwatch
  • Funnel
  • Adult helper
  • Lab notebook
  • Graph paper

Disclaimer: Science Buddies occasionally provides information (such as part numbers, supplier names, and supplier weblinks) to assist our users in locating specialty items for individual projects. The information is provided solely as a convenience to our users. We do our best to make sure that part numbers and descriptions are accurate when first listed. However, since part numbers do change as items are obsoleted or improved, please send us an email if you run across any parts that are no longer available. We also do our best to make sure that any listed supplier provides prompt, courteous service. Science Buddies does participate in affiliate programs with Amazon.comsciencebuddies, Carolina Biological, and AquaPhoenix Education. Proceeds from the affiliate programs help support Science Buddies, a 501( c ) 3 public charity. If you have any comments (positive or negative) related to purchases you've made for science fair projects from recommendations on our site, please let us know. Write to us at scibuddy@sciencebuddies.org.

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Experimental Procedure

  1. Mix the vegetable oil and the thyme in the glass loaf dish.
  2. Stir thoroughly to distribute the flakes of thyme. The flakes of thyme will flow with the liquid, showing the direction and velocity of any fluid flow.
  3. Place the loaf dish on top of the two ceramic mugs.
  4. Observe the oil and spice mixture. With no heat (energy) being added to the system, there should be little or no movement of the liquid, once it has settled.
  5. Place a candle underneath the loaf dish, directly in the middle.
  6. Light the candle and let the liquid heat up for a couple of minutes. Your setup should look like the one in Figure 2, below.
    1. You can also use a can of Sterno. These produce more heat than candles do.
    2. The convection should start soon after the heat is applied.
Setup for modeling ocean currents
Figure 2. Your ocean currents model should look similar to this one right after you have lit the candle.
  1. As the oil heats and begins to flow, observe the pattern of fluid flow (circulation) by noting the location of individual flakes of thyme over time. Write down all of your observations in your lab notebook.
    1. This type of energy movement is called thermal convection, because added heat causes the fluid flow (circulation by convection) by lowering the density of the liquid.
  2. Be sure to view the model several times during the experiment, both from above the dish and from the side of the dish.
  3. Draw a sketch of the model in your lab notebook.
  4. Draw a sketch of the circulation in your lab notebook. Note the shape of the convection cell(s).
  5. Is the pattern approximately symmetric on the two sides of the heated area? Where do you observe upward flow? Where do you see downward flow? Where do you observe horizontal flow?
  6. Measure the temperature of the oil in different parts of the model.
    1. What is the biggest temperature difference you can find?
    2. Record the temperature in your lab notebook.
  7. Measure the horizontal velocity of the convective flow near the surface of the liquid.
    1. Place the ruler on the top of the container (oriented horizontally and lengthwise) to measure the distance a flake of thyme travels.
    2. Use a stopwatch to measure the time it takes a single flake to move a certain distance.
    3. Divide the distance by the time to get velocity (in centimeters per second).
    4. For example, if the flake moves 3 cm in 4 sec, its velocity is .75 cm/sec.
  8. Make another sketch of the model with arrows showing the direction and velocity of the currents.
  9. Measure the velocity of the flakes in different parts of the model.
    1. Are all of the measurements approximately the same? Where are the velocities the largest? Where are they the smallest? What could explain variations in velocity?
    2. Are the directions of flow "away from" the heated central area of the container?
  10. Add another lit candle and repeat steps 12–15 to measure the temperature of the oil and the velocity of the flakes now.
    1. How does increasing the heat affect the velocity?
  11. Repeat step 16 two more times so that you add a third and then a fourth candle and repeat taking your measurements of temperature and velocity. Do your best to get all of the candles between the mugs and evenly heating the oil.
  12. Make a graph of temperature of the oil versus the velocity of the current.
    1. Do you see a correlation between the temperature of the oil and the velocity of the current?
    2. Can you relate your results to the global conveyor belt? (Hint: You may want to try re-reading the Introduction in the Background tab to answer this question.)

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.


  • Add an "island" made from a can or other object. Sketch the current flow around the island.
  • Can you think of a way to add a "polar region" to the model, perhaps using a bag of ice? How does the current change with the polar region in place?
    • Caution: Do not add the polar region to a heated setup, as the rapid change in temperature could be dangerous. Instead, add the polar region to a room-temperature setup (i.e., room-temperature vegetable oil prepared with thyme flakes in the dish) and then heat up the setup using the candles as described in the Procedure.
  • Try a larger heat-resistant glass dish, like a lasagna pan. Place the candles in different regions and sketch the current flow.

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Ask an Expert

The Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Ask an Expert

Related Links

If you like this project, you might enjoy exploring these related careers:

hydrologist measuring stream flow


Water is critical to the survival of virtually all the living things that you see around you. It is essential to the production of most of the things that people make, too. Hydrologists are the people who study and manage this remarkable resource. Through data gathered from satellite instruments, hydrologists examine and create computer models that show how water moves above, on, and under the earth. With these models, hydrologists work to conserve water, to predict droughts or floods, to find new water sources, and to reduce and reuse waste water. Read more
Geoscientist from Chevron


Just as a doctor uses tools and techniques, like X-rays and stethoscopes, to look inside the human body, geoscientists explore deep inside a much bigger patient—planet Earth. Geoscientists seek to better understand our planet, and to discover natural resources, like water, minerals, and petroleum oil, which are used in everything from shoes, fabrics, roads, roofs, and lotions to fertilizers, food packaging, ink, and CD's. The work of geoscientists affects everyone and everything. Read more

News Feed on This Topic

, ,
Reading level:
Note: A computerized matching algorithm suggests the above articles. It's not as smart as you are, and it may occasionally give humorous, ridiculous, or even annoying results! Learn more about the News Feed

Looking for more science fun?

Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.

Find an Activity