Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students
Create Assignment

Racing Bristlebots

Difficulty
Time Required Average (6-10 days)
Prerequisites None
Material Availability A kit is available for your convenience from the Science Buddies Store. Estimated project time includes time to ship the kit.
Cost Low ($20 - $50)
Safety Adult supervision is required when cutting the head off a toothbrush.

Abstract

Have you ever wanted to build your very own robot from scratch? Bristlebots are a cheap, easy, and fun-to-build robot made from the head of a toothbrush, a battery, and a small motor. Once completed, they buzz along the top of a table like bugs. How can you make a bristlebot go faster? In this project, you will build bristlebots from two different types of toothbrushes, and race them against each other to find out.

Objective

Build one bristlebot with straight bristles and one with slanted bristles, and race them to see which is faster.

Credits

Ben Finio, PhD, Science Buddies

This project is based on the following post by Evil Mad Scientist Laboratories: http://www.evilmadscientist.com/2007/bristlebot-a-tiny-directional-vibrobot/

Cite This Page

MLA Style

Science Buddies Staff. "Racing Bristlebots: On Your Mark. Get Set. Go!" Science Buddies. Science Buddies, 19 Aug. 2016. Web. 26 Sep. 2016 <http://www.sciencebuddies.org/science-fair-projects/project_ideas/Robotics_p010/robotics/racing-bristlebots.shtml?from=Blog>

APA Style

Science Buddies Staff. (2016, August 19). Racing Bristlebots: On Your Mark. Get Set. Go!. Retrieved September 26, 2016 from http://www.sciencebuddies.org/science-fair-projects/project_ideas/Robotics_p010/robotics/racing-bristlebots.shtml?from=Blog

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.


Last edit date: 2016-08-19

Introduction

Have you ever wanted to build your own robot? What about tiny robots that you could race against each other? In this science project, you will build and race bristlebots, tiny robots built on the head of a toothbrush, like the ones shown in Figure 1.

bristlebots racing
Figure 1. Two bristlebots racing against each other.

The bristlebot uses a small electric motor to move. In order to power the motor, the robot also needs a battery. When you connect the battery to the motor, you complete an electrical circuit. This makes a tiny weight inside the motor spin, causing it to vibrate. When the motor vibrates, it causes the robot to shake and buzz along the tabletop. This is the same type of motor that makes video game controllers and cell phones vibrate.

In this science project, you will build two different bristlebots: one with slanted toothbrush bristles, and one with straight bristles. Then you will race them against each other to see which one is faster!

Terms and Concepts

  • Robot
  • Motor
  • Battery
  • Circuit

Questions

  • What makes the motor vibrate?
  • How can a vibrating motor make something move?
  • Which do you think will go faster: a bristlebot with straight bristles or one with slanted bristles?

Bibliography

This project is based on the following post by Evil Mad Scientist Laboratories:

If you want to learn more about some of the concepts in this project, like circuits and vibrational motion, check out these references:

News Feed on This Topic

 
, ,
Note: A computerized matching algorithm suggests the above articles. It's not as smart as you are, and it may occasionally give humorous, ridiculous, or even annoying results! Learn more about the News Feed

Materials and Equipment Product Kit Available

  • Bristlebot kit, available from the Science Buddies Store . You will need these parts from the kit:
    • Coin cell battery (2)
    • Vibration motor (2)
  • You will also need to gather the following materials, which are not included in the kit:
    • Toothbrush heads (2), one with slanted bristles and one with straight bristles, with the handles cut off
    • Double-sided foam tape
    • Scissors
    • Three large, heavy textbooks
    • Flat, smooth surface like a table or countertop. The robots will not work on rough surfaces or carpet.
    • Optional: Stopwatch
    • Lab notebook

Recommended Project Supplies

View Kit
Project Kit: $34.95

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Experimental Procedure

Building Your Bristlebots

  1. Get an adult to use strong scissors or pliers to help you cut the heads off two toothbrushes, one with slanted bristles and one with straight bristles.
  2. Follow the steps in this slideshow to build two bristlebots:
Stick foam tape to top of toothbrush. Peel backing off foam tape. Pull pieces of insulation off ends of battery wires. Battery with insulation pieces removed. Attach battery to foam tape. Battery attached to toothbrush. Peel paper backing off motor. Attach motor to toothbrush. Battery and motor attached to toothbrush. Twist together red wires. Twist together black wires. Your bristlebot should now vibrate. Short circuit open circuit robot falling over Bristlebot with googly eyes
  1. If you prefer, you can watch an assembly video that shows you how to build your bristlebots.
  2. Follow these troubleshooting tips when using your bristlebot:
    1. Do not let the exposed metal parts of the red and black wires touch each other directly. This will create a short circuit and drain the battery very quickly, and will prevent the motor from vibrating.
    2. If your robot stops moving suddenly, check to make sure that one or both sets of wires did not come loose. This will create an open circuit and prevent the motor from vibrating. Tightly twist the wires back together if this happens.
    3. If your robot falls over a lot, make sure the motor and battery are centered on top of the toothbrush. You can also let the robot run continuously for 5–10 minutes, and it will slow down slightly as the battery begins to drain.
    4. To turn your bristlebot off, just untwist one set of wires (you do not need to disconnect both). Make sure you turn your robot off when not in use to conserve battery power.

Racing Your Bristlebots

  1. Make a racetrack for your bristlebots by setting up three large books on a smooth, flat surface, as shown in Figure 2. This creates two "chutes" that will force your bristlebots to go straight.
bristlebot racing chute
Figure 2. Racing chutes for bristlebots, made using three large books.
  1. Get ready to race your bristlebots! Reconnect the wires for each robot to turn them back on.
  2. Test your bristlebots in your racing chutes. If the chutes are too narrow, your bristlebots might get stuck. If they are too wide, they might spin around or fall over. Adjust the width of the chutes, if necessary.
  3. Pick up your bristlebots and place them side by side in your racing chutes.
  4. Let go of both bristlebots at the same time. Watch closely to see which one makes it to the other end of the chute first.
  5. If one robot goes backwards, flip it around and start over.
  6. Record the winner of the race in your lab notebook.
  7. Repeat the race four more times, for a total of five trials. Make sure you record your results in your lab notebook.
  8. Optional: Use a stopwatch to record how long it takes each bristlebot to go down the chute. Have a volunteer help if it is too difficult to use a stopwatch and control both bristlebots at the same time.
  9. Analyze your results.
    1. Does one bristlebot consistently win the race?
    2. How do your results compare to your prediction about which type of bristlebot would be faster?

Explore More!

Looking for more robot fun? Explore the World of Robotics with This Suite of Projects!

Troubleshooting

For troubleshooting tips, please read our FAQ: Racing Bristlebots: On Your Mark. Get Set. Go!.

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.


Variations

  • Try building more bristlebots with even more types of toothbrushes. Which toothbrush head works the best?
  • If you would like to build a larger robot that works on the same principle as the bristlebot (vibrational motion), check out the Science Buddies project Art Bot: Build a Wobbly Robot Friend That Creates Art. The electronic parts required to build an Art Bot are already included in your Basic Vibrobot kit from Science Buddies.
  • If you would like to try a more advanced project, you can build a light-following bristlebot in the Build a Light-Tracking Bristlebot project.
  • Instead of using a chute, make a circular "arena" for your bristlebots to let them move around freely. Set up a video camera directly above the arena, looking down, and use it to record the bristlebot's motion. Then, analyze the video with a computer and make plots of the path each bristlebot follows. Do the paths seem totally random, or can you identify any patterns? For example, do certain bristlebots tend to always turn in one direction?
  • Make a "maze" for your bristlebots and time how long it takes different designs to find their way out of the maze.

Explore More!

Looking for more robot fun? Explore the World of Robotics with This Suite of Projects!

Share your story with Science Buddies!

I did this project I Did This Project! Please log in and let us know how things went.

Frequently Asked Questions (FAQ)

If you are having trouble with this project, please read the FAQ below. You may find the answer to your question.
Q: Why will my bristlebot not go straight?
A: A bristlebot's motion is random, meaning that it has no steering. It is very difficult to build a bristlebot that will go perfectly straight on its own. This is why the instructions recommend making a chute to guide the bristlebots on a straight path.
Q: Why does my bristlebot keep falling over?
A: If your bristlebot falls over frequently, there is a chance that your motor and battery are off-center. Try adjusting the motor and battery to make sure they are centered on the toothbrush head. Your bristlebot will also move faster and be more likely to fall over for the first 5–10 minutes of use. As the battery drains, the robot will slow down and will not fall over as much. If you cannot get the robot to stop falling over even after adjusting the motor and battery, let it run continuously for 5–10 minutes and then try again.
Q: Why does my bristlebot suddenly stop moving?
A: If your bristlebot abruptly stops moving, two of the wires you twisted together probably came loose. Constant vibrations can cause the wires to wiggle and gradually come apart. Check to make sure the wires from the motor and battery are tightly twisted together.
Q: Why can I not measure a speed difference between my two bristlebots?
A: Make sure you are using two completely different types of toothbrush heads, one with straight bristles and one with slanted bristles. If you are using two similar toothbrush heads, even if they are not identical, the bristlebots might move at about the same speed.
Q: How long will my bristlebots' batteries last?
A: Your bristlebots' motors use a lot of electricity. The tiny coin cell batteries that come with your bristlebots were not designed to supply a lot of electricity for long periods of time. Each battery should last for about one hour, but the robots may start to slow down after 30–45 minutes of continuous use.

Ask an Expert

The Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Ask an Expert

Contact Us

If you have purchased a kit for this project from Science Buddies, we are pleased to answer any question not addressed by the FAQ above.

In your email, please follow these instructions:
  1. What is your Science Buddies kit order number?
  2. Please describe how you need help as thoroughly as possible:

    Examples

    Good Question I'm trying to do Experimental Procedure step #5, "Scrape the insulation from the wire. . ." How do I know when I've scraped enough?
    Good Question I'm at Experimental Procedure step #7, "Move the magnet back and forth . . ." and the LED is not lighting up.
    Bad Question I don't understand the instructions. Help!
    Good Question I am purchasing my materials. Can I substitute a 1N34 diode for the 1N25 diode called for in the material list?
    Bad Question Can I use a different part?

Contact Us

Related Links

If you like this project, you might enjoy exploring these related careers:

female robotics engineer adjusting robot

Robotics Engineer

Have you watched "The Transformers" cartoon series or seen the "Transformers" movies? Both shows are about how good and evil robots fight each other and the humans who get in the middle. Many TV shows and movies show robots and humans interacting with each other. While this is, at present, fantasy, in real life robots play a helpful role. Robots do jobs that can be dangerous for humans. For example, some robots defuse landmines in war-stricken countries; others work in harsh environments like the bottom of the ocean and on the planet Mars. At the heart of every robot is a robotics engineer who thinks about what a robot needs to do and works with several engineering disciplines to design and put together the perfect piece of equipment. Read more
Mechanical engineer building prototype

Mechanical Engineer

Mechanical engineers are part of your everyday life, designing the spoon you used to eat your breakfast, your breakfast's packaging, the flip-top cap on your toothpaste tube, the zipper on your jacket, the car, bike, or bus you took to school, the chair you sat in, the door handle you grasped and the hinges it opened on, and the ballpoint pen you used to take your test. Virtually every object that you see around you has passed through the hands of a mechanical engineer. Consequently, their skills are in demand to design millions of different products in almost every type of industry. Read more
electrical engineer aligning laser

Electrical & Electronics Engineer

Just as a potter forms clay, or a steel worker molds molten steel, electrical and electronics engineers gather and shape electricity and use it to make products that transmit power or transmit information. Electrical and electronics engineers may specialize in one of the millions of products that make or use electricity, like cell phones, electric motors, microwaves, medical instruments, airline navigation system, or handheld games. Read more
robotics technician

Robotics Technician

Robots are no longer futuristic machines. Robots are here and now and are used in manufacturing, health care, service industries, and military applications. They perform tasks that are repetitive and hazardous—things that humans don't want to do or are unsafe to do. But robots are still machines, which means they require humans to build, maintain, program, and keep them functioning efficiently. Robotics technicians work with robotics engineers to build and test robots. They are responsible for installing and maintaining robots and keeping them in working order for their employers. If you are interested in working with robots, your future is here and now. Read more

News Feed on This Topic

 
, ,
Note: A computerized matching algorithm suggests the above articles. It's not as smart as you are, and it may occasionally give humorous, ridiculous, or even annoying results! Learn more about the News Feed

Looking for more science fun?

Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.

Find an Activity