Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Project Ideas

Science Fair Project Idea
What can you do with magnets and ball bearings that makes a lot of noise? Why, build a magnetic rifle, called a Gauss rifle, of course! Now, this rifle is not a weapon, but a way for you to learn a lot more about physics concepts, like momentum. In this physics science project, you will investigate how far a ball bearing launched by a Gauss rifle will fly, depending on how many magnetic acceleration stages are in the rifle and the ball bearing's initial velocity. This science project makes for… Read more
Phys_p081
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items including neodymium magnets and steel ball bearings are needed for this project. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety A Gauss rifle can produce high velocity projectiles. Do not aim the gun at anyone or anything; do not put your hand in front of the projectile. Operate the Gauss rifle safely. Be sure to read the important safety notes at the beginning of the Experimental Procedure before you begin. Scissors or other metal objects may be attracted to the magnets; use caution when using metal objects near the magnets.
Science Fair Project Idea
The human body is an impressive piece of machinery, and your hands are no exception. With some training, they can perform delicate and complex tasks like manipulating pens and tools to create art. At the same time, hands have the strength and durability to hold a person's own body weight up on steep rocks. Unfortunately, there is a rapidly growing demand for hand replacements. But fortunately, scientists have studied human anatomy and biology and created humanlike hands used as artificial… Read more
HumBio_p042
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
Sometimes engineers get ideas to build robots from animals in nature. There are robot dogs, robot snakes, robot birds, robot cheetahs, and even tiny robotic insects! In this science project, you will build a robot insect of your own. The robot will automatically drive toward a light source, mimicking a behavior called phototaxis, seen in some insects. You will build your own robot and then make adjustments so it can reliably drive toward a light. Read more
Robotics_p012
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites none
Material Availability A kit containing all the electronics parts needed for this project can be found in the .
Cost Average ($40 - $80)
Safety No issues
Science Fair Project Idea
Do you ever wish you could hire someone to guard your favorite toys, or keep certain people from coming into your room? What if you could make a robot to do it for you? This project will show you how to build a simple security robot controlled by a motion-detecting sensor. When someone comes near your valuables or enters the room, the robot will spring to life and (hopefully) scare them away! Read more
Robotics_p024
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the Science Buddies reference [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability This project requires the Science Buddies BlueBot Kit. See the Materials list for details.
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to avoid short circuits when building your robot. See the Procedure for more information.
Science Fair Project Idea
When you think of a motor, you may immediately think of a car, but you actually encounter other motors in your home every day. That's right, if you put on clean clothes from the washing machine, ate food from the fridge, or used a fan, you used an electric motor. In this electronics science project, you will make a simple electric motor with two magnets that "talk" to each other. As they interact, they will alternate between "liking" each other (pulling together), and "disliking" each other… Read more
Elec_p051
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You should be able to coil wire neatly (or find someone who can show you how) in order to make your electric motor work.
Material Availability A kit containing all the specialty items needed for this project is available from the .
Cost Low ($20 - $50)
Safety

Never try to use a wall socket as power source for your motor.

Neodymium magnets are very strong. Follow the safety guidelines in the Procedure for working with these magnets.

Science Fair Project Idea
Have you ever wondered how a radio can grab signals that are transmitted through the air and convert them into sound? In this science project, you will build your own AM radio receiver from scratch and use it to listen to AM radio broadcasts. With your crystal radio you will be able to experiment with the circuit and the antenna to get the best reception. Read more
Elec_p014
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this science project, you must live in an area where you can receive at least one strong AM radio station. You can check for this with a car or portable radio.
Material Availability Specific circuit items are required. A Science Buddies kit is available for your convenience. See the Materials and Equipment list for details
Cost Average ($40 - $80)
Safety Never operate your crystal radio during a thunderstorm. When not in use, always disconnect your antenna from the radio circuit, and connect it directly to the ground rod. Be sure to wear safety goggles when installing the ground rod, especially if you are using a metal hammer. An adult's help might be necessary for some steps in the Procedure.
Science Fair Project Idea
The enormous task of cleaning up oil spills in oceans and seas has burdened industry, government, and environmentalists for decades. The cleanup is almost always difficult. It involves great amounts of time, resources, and money to remove the oil from the water, and the cleanup is often only partially successful. Today, however, scientists are coming to the rescue, developing a new technique that combines nanotechnology and magnetism. In this science project, you will test the proposed… Read more
EnvEng_p036
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability A kit containing the specialty items needed for this science project is available from the .
Cost Average ($50 - $100)
Safety Neodymium magnets are very strong. Some have the capacity to interfere or reset pacemakers. Never put a neodymium magnet in your mouth. Always keep them away from computers, credit cards, and other magnetized objects.

Ferrofluids create stains on skin and other materials, so take appropriate measures to keep the fluid contained to the working area.

Science Fair Project Idea
Quick, what is your favorite color of M&Ms® candy? Do you want to know what dyes were used to make that color? Check out this science project to find out how you can do some scientific detective work to find out for yourself. Read more
FoodSci_p006
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability A kit is available from the .
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
Do you play video games on a console or smartphone? Have you ever wished you had the power to change how a game worked, or even to create your very own game? This project will show you how to make your very own video game and controller using the Science Buddies . Check out the video to see what this simple, but fun, project looks like. Of course, you can design the looks and gameplay of your game any way you like! This project requires use of a tiny computer called a… Read more
CompSci_p059
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Estimated project time includes shipping for the kit. The project itself will take one or two days to complete.
Cost Very High (over $150)
Safety No issues
Science Fair Project Idea
Did you ever have a favorite toy like an action figure or doll that could light up, make noise, or move? This project will show you how to make your own interactive toy using the Science Buddies . Check out the video to see what this simple, but fun, project looks like. The version you make does not have to be a robot; it can be any shape and have any sound effects you want. This project uses a tiny computer called a Raspberry Pi and is fun and easy for even complete… Read more
CompSci_p058
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Estimated project time includes shipping for the kit. The project itself will take one or two days.
Cost Very High (over $150)
< 1 2 3 4 5 ... 7 >
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability