Science Buddies will be performing maintenance on Tuesday May 2, 2017 at 10pm PST for a few hours.
During this time, our site and services will not be available while we improve your future experiences.
Thank you for your patience!
Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Efficient Propeller Design”

Showing top 20 results.
Science Fair Project Idea
You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodetector to find out for yourself. Read more
Elec_p040
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
Science Fair Project Idea
Motors are used in many things you find around your house, like your refrigerator, coffee maker, and even a lawn mower. In this electronics science fair project, you will get to build a simple motor, using a kit, and then test how the number of batteries (amount of voltage) used to power the motor affects its performance. Read more
Elec_p057
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items: You will need a switch motor kit, ready for assembly. See the Materials and Equipment list for details.
Cost High ($100 - $150)
Safety Minor injury is possible, so be sure to wear safety goggles. Adult supervision is recommended.
Science Fair Project Idea
LEDs (light-emitting diodes) are electronic components that convert a portion of the electrical energy flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output. Read more
Elec_p037
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law.
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
Science Fair Project Idea
Global warming, climate change, melting ice caps—these are all big events that have an impact our environment. What can we do to help reduce the impact? We can reduce, reuse, and recycle. What can cities do to help? Cities can eliminate waste by saving energy. Cities around the world are switching from incandescent traffic signals to LED traffic signals to save energy and money. That's because LEDs are more efficient than incandescent lamps, which means that LEDs produce more light… Read more
Energy_p003
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites Prior experience with using a digital multimeter
Material Availability Specialty items (see Materials list)
Cost High ($100 - $150)
Safety Since this science project deals with electricity, adult supervision is recommended. The LEDs used in this project are used in traffic signals and are very bright. Do not look directly at the LED when it is in operation and be sure to wear your sunglasses. Be sure to wear safety goggles when operating power tools.
Science Fair Project Idea
If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more
Elec_p039
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law and an understanding of logarithms. Note: the biggest expense is a powered, solderless breadboard, which can be used for future explorations in electronics.
Material Availability Specialty items
Cost Very High (over $150)
Safety No issues
Science Fair Project Idea
You probably know that turning off the lights and the water, and not wasting paper are all ways to help the environment and conserve our resources. Did you know that another way is to use fuel cells? A fuel cell is a device that converts the energy in chemicals to electricity and it creates no pollution. The starting chemical does not have to be something complex — in fact you it can even be water! In this science fair project try your own hand at converting water to electricity with the… Read more
Energy_p002
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items required. See the Materials and Equipment list for details.
Cost High ($100 - $150)
Safety To do this science fair project, you will need to electrolyze water into hydrogen and oxygen. Hydrogen is flammable, so keep the fuel cell and hydrogen storage tank away from sparks.
Science Fair Project Idea
Try different wind turbine/propeller (chord length, pitch) designs by making models from balsa wood. Connect the spinning axle to a DC motor and measure the voltage produced across a resistor to measure power output. Use fan as wind source. (Judge, 2004) Read more
Aero_p029
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
What do you do with your old wooden pencils when they get too short to hold? Don't throw them away; you can use them to make circuits! This project will show you how to use pencils to make resistors, an important part of many electrical circuits, and test how they affect the brightness of a lightbulb in a simple circuit. Read more
Elec_p013
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability A kit for this project is available from the . Estimated project time includes time for shipping the kit.
Cost Low ($20 - $50)
Safety Short circuits can get very hot and present a burn hazard. Never connect the positive and negative ends (red and black wires) of the battery pack directly to each other. Adult supervision is required for cutting the pencils.
Science Fair Project Idea
In the animal kingdom, many different critters use whiskers to help them find their way around in the dark, through murky waters, or even to help them hunt prey. Whiskers can be very useful when the animals cannot rely on sight. Did you know that you can also build a robot that uses "whiskers" to find its way around? This project will show you how to build a simple robot that uses whiskers as "bump sensors" to help the robot detect when it is about to bump into an obstacle, so it can turn… Read more
Robotics_p028
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the Science Buddies reference [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability A kit is available from the .
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to avoid short circuits when building your robot. See the Procedure for more information.
Science Fair Project Idea
How easy is it for you to walk along and follow a line that is painted on the ground? Simple, right? You might be able to follow a line without giving it much thought, but how could a robot do that? In this project, you will build your own automatic line-following robot that can race around a track that you create. This technology has plenty of real-world applications—maybe one day you could help design self-driving cars! Read more
Robotics_p023
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the Science Buddies reference [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability A kit for this project is available from the .
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to follow the directions in the Procedure in order to avoid short circuits when building your robot.
1 2 >
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability