Think of a way to launch the puck with a reproducible force, and examine the effect of launching the puck in different orientations on the distance it travels. For more information on the physics, see Haché, 2002.
Does the force of drag have an effect on the distance the puck will travel? Think of a way to launch the puck with a reproducible force, and examine the effect of launching the puck in different orientations on the distance it travels. For more information on the physics, see Haché, 2002.
You'll need: a puck, a hockey stick, a tape measure, at least one helper with a stopwatch and an empty rink. Have your friend start the watch just as you make contact with the puck, and stop it when the puck hits the boards. Measure the distance and divide by the time to get the speed of the puck. With two helpers and two stop watches, you can time the puck at center ice and at the far end. Are the speeds the same? How about if you don't follow through, but stop your stick as soon as it…
For this project, you'll use a baseball as a pendulum weight, studying the motion of the ball with and without spin. Wrap a rubber band around the ball, and tie a string to the rubber band. Fasten the string so that the ball hangs down and can swing freely. Mark a regular grid on cardboard, and place it directly beneath the ball to measure the motion. You can also time the oscillations with a stopwatch. Lift the ball along one of the grid axes, and let it go. Observe the motion and record…
You can make a very simple hovercraft with a stiff, disposable plate-a pie plate should work well-and a balloon. Glue a square of cardboard in the center of the bottom of the plate. Make a small hole through the center of both of these layers. Enlarge the hole slightly with a pencil. Push a balloon through the hole so that the opening is on the front side of the plate, and rest of the balloon sticks out from the back. Blow up the balloon, then set the plate down (balloon side up). What…
While watching an ice hockey game, have you ever wondered what differentiates a good player from a great player? For sure, the great player is athletically superior to the good player. But maybe it is a combination of athleticism and equipment. Maybe a great player knows which hockey stick is best for him or her. Hockey players can choose to play with hockey sticks with different flexibilities or "flex." In this science fair project, investigate how stick flex affects shot accuracy and speed.…
+ More Details
- Less Details
Average (6-10 days)
Access to an empty ice rink and knowledge of how to play ice hockey.
Specialty items required. You need access to an empty ice rink, hockey equipment and safety gear, a sports radar gun appropriate for hockey, and two volunteers who also have equipment and safety gear.
Research the famous collapse of the Tacoma Narrows suspension bridge.
What lessons were learned about the potentially damaging effects of wind on bridges? What structures stabilize a bridge against wind forces? Build models and use a wind tunnel to test your hypothesis.
How much difference does the spiraling motion of a well-thrown football make on the distance of the throw (compared to wobbling, or end-over-end motion of the ball)? Think of a way to reproducibly produce the desired ball motion and launch it with a constant force to find out. (For more information on the physics, see Gay, 2004.)
Have you ever flown in an airplane, or looked up at one flying in the sky, and wondered how such a massive machine can stay in the air? Airplanes can stay in the air because their wings, also referred to as airfoils, generate lift. Engineers use devices called wind tunnels to experiment and test different wing shapes when they design new airplanes. Wind tunnels let engineers make careful measurements of the air flow around the wing, and measure the amount of lift it generates.
If you can get…
Fill a jar a little more than half full with fresh water. Make a solution of salt water, and add a drop or two of food coloring to it. Pour the salt water solution into a plastic cup with a small hole in the bottom, and then place the cup in the jar with fresh water. (The only connection between the fresh and salt water should be via the hole in the bottom of the cup.) With the right combination of hole size and salt concentration, you will see an oscillating current develop in the jar. …
You can find this page online at: http://www.sciencebuddies.org/science-fair-projects/search.shtml?v=solt&pi=Aero_p024.shtml
You may print and distribute up to 200 copies of this document annually, at no charge, for personal and classroom educational use. When printing this document, you may NOT modify it in any way. For any other use, please contact Science Buddies.