Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Showing the Airflow in a Wind Tunnel”

Showing top 20 results.
Science Fair Project Idea
Winglets are the short vertical "fins" at the wingtips of some airplanes. Have you ever wondered why they are there? If you have access to a wind tunnel, you can build model airfoils with and without winglets and see for yourself. If you're really ambitious, you can also build your own wind tunnel. Read more
Aero_p012
+ More Details
- Less Details
Time Required Very Long (1+ months)
Prerequisites Experience building airfoils, access to a wind tunnel for testing.
Material Availability Specialty Items (wind tunnel for testing airfoils)
Cost High ($100 - $150)
Safety No issues
Science Fair Project Idea
thumbnail Have you ever wondered why golf balls have a pattern of dimples on their surface? The dimples are important for determining how air flows around the ball when it is in flight. The dimple pattern, combined with the spin imparted to the ball when hit by the club, greatly influence the ball's flight path. For example, backspin generates lift, prolonging flight. When the ball is not hit squarely with the club, varying degrees of sidespin are imparted to the ball. A clockwise sidespin (viewed from… Read more
Sports_p012
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites To do this experiment you must have sufficient golf experience to swing a golf club consistently and have access to golf clubs.
Material Availability Specialty items
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
Have you ever flown in an airplane, or looked up at one flying in the sky, and wondered how such a massive machine can stay in the air? Airplanes can stay in the air because their wings, also referred to as airfoils, generate lift. Engineers use devices called wind tunnels to experiment and test different wing shapes when they design new airplanes. Wind tunnels let engineers make careful measurements of the air flow around the wing, and measure the amount of lift it generates. If you can get… Read more
Aero_p004
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Access to a homemade wind tunnel
Material Availability Readily available
Cost Average ($50 - $100)
Science Fair Project Idea
thumbnail Just one sheet of paper can lead to a whole lot of fun. How? Paper planes! All you have to know is how to fold and you can have a simple plane in a matter of minutes! But what design should you use to build the best plane? In this aerodynamics science project, you will change the basic design of a paper plane and see how this affects its flight. Specifically, you will increase how much drag the plane experiences and see if this changes how far the paper plane flies. There is a lot of cool… Read more
Aero_p046
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety Fly your planes in a large area, away from foot and vehicle traffic.
Science Fair Project Idea
You can make a very simple hovercraft with a stiff, disposable plate-a pie plate should work well-and a balloon. Glue a square of cardboard in the center of the bottom of the plate. Make a small hole through the center of both of these layers. Enlarge the hole slightly with a pencil. Push a balloon through the hole so that the opening is on the front side of the plate, and rest of the balloon sticks out from the back. Blow up the balloon, then set the plate down (balloon side up). What… Read more
Aero_p027
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
thumbnail Have you ever noticed how some jet planes have small, vertical projections as the tips of the wings? They're called winglets. What are they there for? Read more
Aero_p013
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety No issues
Science Fair Project Idea
Research the famous collapse of the Tacoma Narrows suspension bridge. What lessons were learned about the potentially damaging effects of wind on bridges? What structures stabilize a bridge against wind forces? Build models and use a wind tunnel to test your hypothesis. Read more
Aero_p030
+ More Details
- Less Details
Time Required Very Long (1+ months)
Science Fair Project Idea
Think of a way to launch the puck with a reproducible force, and examine the effect of launching the puck in different orientations on the distance it travels. For more information on the physics, see Haché, 2002. Read more
Sports_p044
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
Try different wind turbine/propeller (chord length, pitch) designs by making models from balsa wood. Connect the spinning axle to a DC motor and measure the voltage produced across a resistor to measure power output. Use fan as wind source. (Judge, 2004) Read more
Aero_p029
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
thumbnail Watch out! It's Eddy Vortex, Superhero! He swirls, he tumbles, he churns up air and water! OK, maybe eddies and vortices aren't exactly superheroes, but they are powerful regions of air and water flow that you have to watch out for in some surprising places. Try out this science fair project to discover why, as well as where and how to find them. Read more
EnvEng_p029
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety Be sure not to put your fingers or any other objects inside the fan. Adult supervision is recommended.
1 2 >
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability