Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Skiing and Friction”

Science Fair Project Idea
You can model this with an ice cube sliding down a plank: how high do you need to lift the end of the plank before the ice cube starts to slide? Try this with one side plain wood and the flip side waxed wood (use paraffin wax, candle wax or ski wax). Make sure both sides are equally smooth to start with. Do at least three trials. More advanced: using what you know about the forces acting on the ice cube, derive equations to calculate the coefficient of friction for each case. Variation:… Read more
Sports_p042
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
Does the force of drag have an effect on the distance the puck will travel? Think of a way to launch the puck with a reproducible force, and examine the effect of launching the puck in different orientations on the distance it travels. For more information on the physics, see Haché, 2002. Read more
Aero_p025
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
We've all heard that "practice makes perfect," but what is the best way to practice? For example, does "mental practice" do any good? You'll need at least 9 volunteers for this project. Pick a well-defined sports activity, with a measurable outcome, such as shooting basketball free-throws (measure number of shots taken and number of shots made), or balancing on one foot on a slightly raised beam (measure how long you can do it; if it's too easy, try closing your eyes). Test all volunteers… Read more
HumBeh_p037
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Science Fair Project Idea
Think of hitting a baseball, heading a soccer ball into the net, or hitting a tennis ball with a racquet. Where the ball goes depends on...what? You can set up a simple model to start your investigation. You'll need a marble, a flat piece of wood, a flat piece of cardboard, a pencil, a ruler, a protractor, and a level surface. Lay down the cardboard down on a level surface and set up the flat piece of wood at one edge. The wood will act like a wall, and you're going to roll the marble at… Read more
Sports_p040
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Science Fair Project Idea
For example, think of hitting a baseball, heading a soccer ball into the net, or hitting a tennis ball with a racquet. Where the ball goes depends on...what? You can set up a simple model to start your investigation. You'll need a marble, a flat piece of wood, a flat piece of cardboard, a pencil, a ruler, a protractor, and a level surface. Lay down the cardboard down on a level surface and set up the flat piece of wood at one edge. The wood will act like a wall, and you're going to roll… Read more
Phys_p039
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
If you have a multi-speed bike, you know that you can make it easier or harder to pedal just by shifting gears. Ever wonder how that works? You can investigate this a number of ways. A basic approach is to use a selection of spools of thread (with different diameters), a board with two nails, and a rubber band. Place a spool over each nail, and put the rubber band over them. Mark the 12:00 position on each spool so that you can count revolutions. Turn one spool through a full circle and… Read more
Sports_p025
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Science Fair Project Idea
Our forests are a very important natural resource that need to be managed wisely. We use wood products for many different purposes: building materials, paper, cardboard, furniture, fuel, etc. How can we use wood products in a sustainable manner? You can do experiments that examine the growth time of different tree species to see which are good candidates for tree farming. Which types of lumber are most sustainable? You can also compare the effects of clear cutting vs. thinning a forested… Read more
EnvSci_p038
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Science Fair Project Idea
This project can apply to soccer, hockey, baseball and many other sports. What is the effect of stopping the kick/shot/swing at the moment of impact vs. following through? Think of a way to measure the outcome in each case, and explain your results. (idea from Gardner, 2000, 83-85; for more information with regard to specific sports, see: Barr, 1990, 12-14; Gay, 2004, 142-144; Adair, 2002, 30.) Read more
Sports_p034
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Science Fair Project Idea
There are many types of construction materials used for wood-frame houses. Compare the different uses for and strengths of different building materials, e.g.: particle board, plywood, pine, oriented strand board (OSB), and drywall (gypsum board, SheetRock). The Science Buddies Materials Science Resource will be helpful for learning about different ways to measure material strength. You should be sure to use the same cross-sectional area of each material in order to make fair comparisons.… Read more
CE_p020
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
How much force is required to advance a lag bolt (large wood screw with a hex-shaped head) into a piece of wood? You can measure the force by using a spring scale attached to the handle of ratchet. Pull on the spring scale until the bolt starts to turn, and note the required force from the spring scale. There are many potential experiments you could try. Think about answering the following questions: How does the force change as the bolt advances deeper into the wood? Why? How does the… Read more
ApMech_p032
+ More Details
- Less Details
Time Required Short (2-5 days)
1 2 >
Support for Science Buddies provided by:
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability