Others Like “The Design Process: Creating a Stronger Truss” (top 20 results)
|
The wind is a powerful force, enough to erode whole hillsides over time. Building structures in windy environments challenge civil engineers with special safety concerns. A wall in a windy area can either shield you from the cold or fall down on you. Learn a few tricks on how to design walls in windy places.
Read more
If you've played catch with both Aerobie flying rings and Frisbees, you know that the rings fly much further than the Frisbees with the same throwing effort. Why is that? Investigate the aerodynamics of flying rings and flying disks and find out!
Read more
Using just a single sheet of paper (8.5 x 11 inches) and up to five paper clips, can you build a bridge that will span 20 cm and support the weight of 100 pennies? The area beneath the span must be free (so that boats can pass beneath it). To test your bridge, place two books 20 cm apart, and set the bridge on the books, spanning the gap. Do not fasten the bridge to the book (nor to any other support). Does your bridge hold as much weight as you expected it would? If your bridge fails…
Read more
Ever try to tear a telephone book in half? Even though you can easily rip one or a few pages to shreds, the entire phone book has strength in numbers and holds together. This project is an introduction to measuring and comparing the strength of materials. Does spaghetti get extra strength if you bundle it together, or does strength simply increase proportionally with the number of strands? If you are interested in materials testing, get cracking!
Read more
Here's a fun project idea to learn about compression forces. For this experiment you'll need some empty toilet paper tubes, masking tape, sand (or table salt), pebbles (or marbles), a funnel, a cardboard box, and a sturdy chair to help you balance while testing the column. Seal one end of the tube with masking tape. Use the funnel to fill the tube with sand (or salt). Seal the other end with tape. Place the tube on end inside the paper box. Place the chair with its back to the box and hold…
Read more
The idea of a colony on Mars is exciting! In this science project, you will tackle one of the challenges a Martian colony will face: what will buildings on Mars be made of? In this project, you will make bricks from Martian-like ground cover and measure how strong these bricks are.
Read more
Skyscrapers are impressive structures. What does it take to design a building so tall? Engineers use strong materials and innovative design to push the limits of gravity. They use special tables to simulate earthquakes and test models of their buildings. In this project, you will build your own earthquake table and see how tall you can make a tower out of LEGO® bricks. You can even measure how hard your earthquake table shakes using the accelerometer of your smartphone and a sensor app.
Read more
Research the famous collapse of the Tacoma Narrows suspension bridge.
What lessons were learned about the potentially damaging effects of wind on bridges? What structures stabilize a bridge against wind forces? Build models and use a wind tunnel to test your hypothesis.
Read more
The different species of wood used in construction offer a variety of challenges based on density, porosity, oils in the wood, flexibility, elasticity, etc. The intended use, e.g., structural or cosmetic, presents different challenges as well. The glue must be compatible with the wood, the use, and the climate, so many experiments are possible. For example, you could design an experiment to test the durability of different adhesives using the same wood. Or, you could try different wood…
Read more
The Wright brothers used kites extensively to test their design ideas in the years leading up to their first successful airplane flight. With this science project, you'll learn about kite aerodynamics, and then come up with your own hypothesis about building or flying a kite. You can test your hypothesis two ways: with an online kite simulation program from NASA, and outdoors with the real thing! A great feature of this science project is that it has many possible variations, so you can decide…
Read more
|
Explore Our Science Videos
Turn Milk Into Plastic!
Build a Bottle Centrifuge
DIY Light Up Unicorn Headband