Home Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Solid Ground? Measuring Soil Bearing Capacity”

Project Idea
thumbnail Have you ever looked up at a skyscraper and thought "That is so cool!"? Building a skyscraper, or any structure, is more than just building the walls, windows, and floors. All structures require a foundation to keep them from falling down. This is especially important when a structure is built on a hill or on a slope. In this science project, you will build a tower of Lego® Duplos® on slopes with different angles. You will investigate how deep you have to dig the foundation for each angle of… Read more
CE_p022
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety Adult supervision recommended when using the hacksaw. Be sure to wear safety goggles and use caution when using the hacksaw.
Project Idea
thumbnail What covers less than 10% of the Earth's surface, yet is a vital natural resource for terrestrial life? What filters ground water and supports most of our food production, not to mention the production of building materials and paper? The answer, often overlooked, is: soil. With this project you can get all the dirt on soil formation, soil horizons, and the composition of different soils. Read more
EnvSci_p011
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Readily available
Cost Average ($50 - $100)
Safety Minor injury possible
Project Idea
For many kids, a day at the beach would not be complete without building a sandcastle. Have you ever wondered how it is that you can pack sand into a mold for a sandcastle? Do some kinds of sand pack better than others? This project will show you how to measure the porosity of sand: how much air space there is in between the sand grains. Maybe you can use your knowledge from this project to help you make bigger and better projects with sand. Read more
MatlSci_p024
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety No issues
Project Idea
Is an I-beam as strong as a solid beam of the same size? What if you include weight in the comparison: which beam has the greater strength-to-weight ratio? Would an I-beam be stronger than a solid rectangular beam of the same weight? What about other structural shapes (e.g., T-beams, U-beams)? In this project you can find out by setting up a test stand, putting on your safety goggles and measuring how much stress these building components can handle before they snap. Read more
MatlSci_p011
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety Minor injury possible: Wear safety glasses when testing beam capacity. Keep hands and feet clear of the area underneath the weight bucket, which may fall at any time.
Project Idea
Here's a project for a budding architect or structural engineer. Can you make a strong, lightweight tower using only uncooked spaghetti and white glue? In this project, you'll learn about materials testing and apply what you learn to building and testing structures that are both strong and light. Read more
MatlSci_p009
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety Minor injury possible: keep hands and feet clear when testing strength of finished structures.
Project Idea
thumbnail What can you do with magnets and ball bearings that makes a lot of noise? Why, build a magnetic rifle, called a Gauss rifle, of course! Now, this rifle is not a weapon, but a way for you to learn a lot more about physics concepts, like momentum. In this physics science project, you will investigate how far a ball bearing launched by a Gauss rifle will fly, depending on how many magnetic acceleration stages are in the rifle and the ball bearing's initial velocity. This science project makes for… Read more
Phys_p081
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items including neodymium magnets and steel ball bearings are needed for this project. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety A Gauss rifle can produce high velocity projectiles. Do not aim the gun at anyone or anything; do not put your hand in front of the projectile. Operate the Gauss rifle safely. Be sure to read the important safety notes at the beginning of the Experimental Procedure before you begin. Scissors or other metal objects may be attracted to the magnets; use caution when using metal objects near the magnets.
Project Idea
thumbnail This is a modern version of a classic experiment by Robert Boyle on the compressibility of gases. Boyle discovered the relationship between pressure and volume of gases that now bears his name. This project shows you a simple method for re-creating this famous experiment. Read more
Chem_p011
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Prerequisites None
Material Availability Specialty items
Cost Very Low (under $20)
Safety Minor injury possible: be careful when stacking bricks on syringe apparatus.
Project Idea
thumbnail Have you ever had fun playing with sand and water, observing how little rivers you create carve their way down to the lowest point of the sandbox, backyard or beach? Some meander, others braid, and some carve a path straight down. Hyrdologists (or scientists who study water) do very much the same thing! Only they set up the model in a particular way, so observing their mini-rivers helps them answer questions about how water flow affects the environment.In this geology science project, you… Read more
Geo_p045
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Prerequisites None.
Material Availability Readily available. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety Adult help is required to cut the water or milk jugs.
Project Idea
thumbnail What do sand and cereal have in common? They are both granular materials, which means they are made up of solid particles, but they can actually flow like liquid. When two granular materials with very different-sized particles are mixed, you can actually separate each type by putting them in a rotating device called a tumbler. In this science project, you will examine how common household granular materials behave when mixed together in a moving container Read more
Phys_p092
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety Adult supervision is recommended when using a knife to cut a hole in the cardboard box
Project Idea
thumbnail Looking for an exciting new mode of transportation? In this science fair project, you will build a working hovercraft that will glide over surfaces on a cushion of air. And it's simpler to build than you might think! Read more
Aero_p036
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to work with some power tools, such as an electric saw and an electric drill.
Material Availability Readily available
Cost Average ($50 - $100)
Safety Requires adult supervision. Use safety goggles when using power tools. Please review the Hovercraft Safety Guidelines below the Experimental Procedure.
1 2 >
Support for Science Buddies provided by:
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability