Home Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Make Your Own Low-Power AM Radio Transmitter”

Project Idea
thumbnail Have you ever wondered how a radio can grab signals that are transmitted through the air and convert them into sound? In this science project, you will build your own AM radio receiver from scratch and use it to listen to AM radio broadcasts. With your crystal radio you will be able to experiment with the circuit and the antenna to get the best reception. Read more
Elec_p014
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this science project, you must live in an area where you can receive at least one strong AM radio station. You can check for this with a car or portable radio.
Material Availability Specific circuit items are required. A Science Buddies kit is available for your convenience. See the Materials and Equipment list for details
Cost Average ($40 - $80)
Safety Never operate your crystal radio during a thunderstorm. When not in use, always disconnect your antenna from the radio circuit, and connect it directly to the ground rod. Be sure to wear safety goggles when installing the ground rod, especially if you are using a metal hammer. An adult's help might be necessary for some steps in the Procedure.
Project Idea
thumbnail What do the radio, TV, radio controlled cars, and cell phones all have in common? They all use invisible waves to transmit information. Find out which materials block radio waves, and which materials allow radio waves to pass through by doing this experiment. Read more
MatlSci_p036
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety No issues
Project Idea
thumbnail Do you know how to find the north and the south poles of a magnet? What materials are more magnetic than others? Is there a way to measure how strong a magnet is? Is there a way to measure the strength of an electromagnet? How much does the material that is in the core of the electromagnet affect its magnetic strength? With this project, you'll be able to answer these questions and many others. You will learn how to build and use a simple meter for measuring magnetic field intensity. Read more
Elec_p030
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items are needed. See the Materials tab for details.
Cost Low ($20 - $50)
Safety No issues
Project Idea
thumbnail Here's a project with practical applications for homes with a wireless network. This project shows you how to build and test parabolic reflectors for the transmitters on your network. You may be able to increase the range of your transmitter to cover a location you would like to use but couldn't reach previously. You may also be able to find ways to make your network more secure, by reducing signals transmitted beyond your property. Read more
CompSci_p010
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Good computer skills
Material Availability This project requires access to a working wireless network with at least one computer using a wireless connection. A laptop computer with wireless capability is optional, but useful. Other materials readily available.
Cost Very Low (under $20)
Safety No issues
Project Idea
thumbnail Wouldn't it be nice to avoid those nasty electric shocks you get after you've walked around on carpet and then shake a friend's hand, or all those crazy flyaways you get after brushing your hair? These are caused by static electricity. In this science fair project, you will build a super-sensitive charge detector to investigate the positive and negative electric fields created by static electricity. The detector can sense invisible electric fields, so try this science fair project to avoid the… Read more
Elec_p050
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites You should be familiar with the concepts of atoms, electrons, and voltage. Familiarity with building circuits with a breadboard is helpful, but not required.
Material Availability Readily available
Cost Average ($40 - $80)
Safety No issues
Project Idea
thumbnail Strike a key on the piano, and you hear the string vibrating. Just about any object vibrates when it's knocked, but how much and how fast? What properties of the material affect the way it vibrates? This project helps you find out. You'll build a simple light-sensing circuit for measuring the frequency of vibrating springs. Read more
ApMech_p015
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Windows/PC
Material Availability Readily available
Cost Average ($50 - $100)
Safety No issues
Project Idea
thumbnail If you were leaving home for a long walk, how far would you go? One mile, 5 miles, 10 miles? How about 550 miles?! That's a long way, but some wolves have been known to travel that far when they are leaving their packs in search of a mate so they can form their own pack. But is that how far wolves normally travel? Try this wild wolf tracking science fair project to find out! Read more
Zoo_p056
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This science fair project requires the purchase of a Track Wild Wolves Activity Kit from the International Wolf Center. See the Materials tab for details.
Cost Low ($20 - $50)
Safety No issues
Project Idea
thumbnail Global warming, climate change, melting ice caps—these are all big events that have an impact our environment. What can we do to help reduce the impact? We can reduce, reuse, and recycle. What can cities do to help? Cities can eliminate waste by saving energy. Cities around the world are switching from incandescent traffic signals to LED traffic signals to save energy and money. That's because LEDs are more efficient than incandescent lamps, which means that LEDs produce more light… Read more
Energy_p003
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites Prior experience with using a digital multimeter
Material Availability Specialty items (see Materials list)
Cost High ($100 - $150)
Safety Since this science project deals with electricity, adult supervision is recommended. The LEDs used in this project are used in traffic signals and are very bright. Do not look directly at the LED when it is in operation and be sure to wear your sunglasses. Be sure to wear safety goggles when operating power tools.
Project Idea
thumbnail LEDs (light-emitting diodes) are electronic components that convert a portion of the current flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output. Read more
Elec_p037
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law.
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
Project Idea
thumbnail You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodector to find out for yourself. Read more
Elec_p040
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
1 2 >
Support for Science Buddies provided by:
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability