Home Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Color Mixing with Red, Green, & Blue LEDs”

Project Idea
thumbnail If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more
Elec_p039
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law and an understanding of logarithms. Note: the biggest expense is a powered, solderless breadboard, which can be used for future explorations in electronics.
Material Availability Specialty items
Cost Very High (over $150)
Safety No issues
Project Idea
thumbnail LEDs (light-emitting diodes) are electronic components that convert a portion of the current flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output. Read more
Elec_p037
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law.
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
Project Idea
thumbnail Global warming, climate change, melting ice caps—these are all big events that have an impact our environment. What can we do to help reduce the impact? We can reduce, reuse, and recycle. What can cities do to help? Cities can eliminate waste by saving energy. Cities around the world are switching from incandescent traffic signals to LED traffic signals to save energy and money. That's because LEDs are more efficient than incandescent lamps, which means that LEDs produce more light… Read more
Energy_p003
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites Prior experience with using a digital multimeter
Material Availability Specialty items (see Materials list)
Cost High ($100 - $150)
Safety Since this science project deals with electricity, adult supervision is recommended. The LEDs used in this project are used in traffic signals and are very bright. Do not look directly at the LED when it is in operation and be sure to wear your sunglasses. Be sure to wear safety goggles when operating power tools.
Project Idea
thumbnail Do you know how to find the north and the south poles of a magnet? What materials are more magnetic than others? Is there a way to measure how strong a magnet is? Is there a way to measure the strength of an electromagnet? How much does the material that is in the core of the electromagnet affect its magnetic strength? With this project, you'll be able to answer these questions and many others. You will learn how to build and use a simple meter for measuring magnetic field intensity. Read more
Elec_p030
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items are needed. See the Materials tab for details.
Cost Low ($20 - $50)
Safety No issues
Project Idea
thumbnail "Waste not, want not" is a common saying. These four words sum up an important principle: if you "waste" an important resource, you might find you don't have enough of it when you "want" it. One of the most important resources we have is clean water. In many parts of the world, including the western part of the United States, water shortages pose serious problems. In this science project, you will build an electronic circuit that can 1) detect when it is raining and 2) shut off power, such as… Read more
Elec_p066
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some experience with electronics would be helpful. If you are new to electronics, plan to spend some time learning about the subject prior to making the circuit. The workbook included with the kit has introductory information.
Material Availability The procedure calls for an electronics kit that can be purchased online. See the Materials and Equipment list for details.
Cost Average ($50 - $100)
Safety No issues
Project Idea
thumbnail Light interacts with matter in a variety of ways—it can be absorbed, reflected, refracted (bent), and scattered. The scattering of light explains why the sky is blue, why milk is white, and why the Mississippi River is called "The Big Muddy." In this biochemistry science fair project, you will make an electronic device to measure the amount of scattered light in milk. You will also use the device to track the activity of protease (a type of enzyme) in pineapple juice, based on its ability… Read more
BioChem_p032
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites A familiarity with basic chemistry is required. Experience with simple electronics would be helpful, but is not absolutely required. Although the procedure provides step-by-step instructions, this is a DIY (do-it-yourself) science fair project that may call for some creative problem solving on your part.
Material Availability Electronic components are required. See the Materials & Equipment list for details.
Cost Average ($50 - $100)
Safety Use caution when working with laser pointers. Wear safety goggles when using the drill.
Project Idea
thumbnail You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodector to find out for yourself. Read more
Elec_p040
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
Project Idea
thumbnail Have you ever seen moths buzzing around bright lights at night? What about animals that always crawl into dark places, under rocks or furniture? This type of behavior is called phototaxis — movement toward (or away from) a light source. In this project you will build your own biologically inspired robot critter that mimics this behavior. Basing your design on the popular and simple BristleBot robot, you will make a robot with two light sensors for "eyes" and two motors that help it steer… Read more
Robotics_p012
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some familiarity with electronic circuits and using breadboards will be very helpful, though not required, for this project. Using a soldering iron is also helpful but a work-around is offered in the Procedure.
Material Availability This project requires certain parts from an electronics store or online retailer. See the Materials and Equipment list for details.
Cost Average ($40 - $80)
Safety If you use a soldering iron for this project remember that soldering irons get extremely hot and can cause burns if they touch your skin. They can also become a fire hazard if left unattended. Science Buddies recommends using lead-free solder, especially in homes with pets or small children.
Project Idea
thumbnail Strike a key on the piano, and you hear the string vibrating. Just about any object vibrates when it's knocked, but how much and how fast? What properties of the material affect the way it vibrates? This project helps you find out. You'll build a simple light-sensing circuit for measuring the frequency of vibrating springs. Read more
ApMech_p015
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Windows/PC
Material Availability Readily available
Cost Average ($50 - $100)
Safety No issues
Project Idea
thumbnail Objects that glow in the dark hold a special place in the imagination of both children and adults. The lights go out at night, but these odd things refuse to disappear. Where does the light come from? Do they work in any climate? In this science fair project, you will build an electronic device that measures the light given off by luminescent materials. The device will be used to study how temperature affects luminescence. Read more
Chem_p072
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites A familiarity with basic chemistry is required. Also, some experience with electronics would be helpful. Although the circuit is fairly straightforward, especially if you use the kit, this is a DIY ("do-it-yourself") project that will call for some creative problem solving on your part.
Material Availability Any phosphorescent material will work for this project. If you want to use super-bright phosphorescent paints, they are available online. See the Materials & Equipment list for more information.
Cost High ($100 - $150)
Safety Use caution when using the drill or knife. Wear safety goggles when using the drill.
1 2 >
Support for Science Buddies provided by:
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability