Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Linear vs. Logarithmic Changes: What Works Best for Human Senses?”

Science Fair Project Idea
thumbnail This is a good project for someone who is interested in both electronics and color vision. The equipment needed is on the expensive side, but if you continue studying electronics, you can use it again and again. Read more
Elec_p038
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this project you should be familiar with Ohm's Law. Experience building electronic circuits on a solderless breadboard is also helpful. The breadboard is the biggest expense, which can be used for future explorations in electronics.
Material Availability Specialty items
Cost Very High (over $150)
Safety Adult supervison required when using power drill.
Science Fair Project Idea
thumbnail LEDs (light-emitting diodes) are electronic components that convert a portion of the electrical energy flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output. Read more
Elec_p037
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law.
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
Science Fair Project Idea
thumbnail You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodector to find out for yourself. Read more
Elec_p040
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
Science Fair Project Idea
thumbnail Global warming, climate change, melting ice caps—these are all big events that have an impact our environment. What can we do to help reduce the impact? We can reduce, reuse, and recycle. What can cities do to help? Cities can eliminate waste by saving energy. Cities around the world are switching from incandescent traffic signals to LED traffic signals to save energy and money. That's because LEDs are more efficient than incandescent lamps, which means that LEDs produce more light… Read more
Energy_p003
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites Prior experience with using a digital multimeter
Material Availability Specialty items (see Materials list)
Cost High ($100 - $150)
Safety Since this science project deals with electricity, adult supervision is recommended. The LEDs used in this project are used in traffic signals and are very bright. Do not look directly at the LED when it is in operation and be sure to wear your sunglasses. Be sure to wear safety goggles when operating power tools.
Science Fair Project Idea
thumbnail Do you know how to find the north and the south poles of a magnet? What materials are more magnetic than others? Is there a way to measure how strong a magnet is? Is there a way to measure the strength of an electromagnet? How much does the material that is in the core of the electromagnet affect its magnetic strength? With this project, you'll be able to answer these questions and many others. You will learn how to build and use a simple meter for measuring magnetic field intensity. Read more
Elec_p030
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items are needed. See the Materials tab for details.
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
thumbnail "Waste not, want not" is a common saying. These four words sum up an important principle: if you "waste" an important resource, you might find you don't have enough of it when you "want" it. One of the most important resources we have is clean water. In many parts of the world, including the western part of the United States, water shortages pose serious problems. In this science project, you will build an electronic circuit that can 1) detect when it is raining and 2) shut off power, such as… Read more
Elec_p066
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some experience with electronics would be helpful. If you are new to electronics, plan to spend some time learning about the subject prior to making the circuit. The workbook included with the kit has introductory information.
Material Availability The procedure calls for an electronics kit that can be purchased online. See the Materials and Equipment list for details.
Cost Average ($50 - $100)
Safety No issues
Science Fair Project Idea
Solar cells are an alternative method for generating electricity directly from sunlight. With this project, you can get down to the atomic level and learn about the world of solid-state electronics as you investigate how solar cells work. Your experiment will measure the effect of changing light intensity on power output from the solar cell. A possible variation would be to investigate the effect of changing the color of the light. Read more
Energy_p014
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
thumbnail Do you hate shots? Do you complain about paper cuts? Imagine if you had to give yourself shots a couple of times a day, as well as prick your finger, on purpose, even more frequently. Of course, if you have diabetes you do not have to imagine this; it is your reality. People who have diabetes usually need to keep close track of how much sugar is in their blood (called their blood glucose levels)by testing a drop of blood from a finger prick. If there is too much sugar in their blood, some… Read more
HumBio_p040
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some familiarity with electronic circuits and using breadboards would be helpful, though it is not required for this project. Completion of a basic chemistry class is also recommended before trying this project.
Material Availability A pump and other electronics parts must be specially ordered to do this project. See the Materials and Equipment list for details. Estimated project time includes shipping of specialty components.
Cost Average ($40 - $80)
Safety Some parts of the circuit can get warm during normal operation. Do not leave the circuit operating when unattended. Be very careful with your wiring to prevent short circuits from happening; short circuits can get very hot and cause plastic parts of the circuit to melt.
Science Fair Project Idea
thumbnail Light interacts with matter in a variety of ways—it can be absorbed, reflected, refracted (bent), and scattered. The scattering of light explains why the sky is blue, why milk is white, and why the Mississippi River is called "The Big Muddy." In this biochemistry science fair project, you will make an electronic device to measure the amount of scattered light in milk. You will also use the device to track the activity of protease (a type of enzyme) in pineapple juice, based on its ability… Read more
BioChem_p032
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites A familiarity with basic chemistry is required. Experience with simple electronics would be helpful, but is not absolutely required. Although the procedure provides step-by-step instructions, this is a DIY (do-it-yourself) science fair project that may call for some creative problem solving on your part.
Material Availability Electronic components are required. See the Materials & Equipment list for details.
Cost Average ($50 - $100)
Safety Use caution when working with laser pointers. Wear safety goggles when using the drill.
Science Fair Project Idea
thumbnail Have you ever seen moths buzzing around bright lights at night? What about animals that always crawl into dark places, under rocks or furniture? This type of behavior is called phototaxis — movement toward (or away from) a light source. In this project you will build your own biologically inspired robot critter that mimics this behavior. Basing your design on the popular and simple BristleBot robot, you will make a robot with two light sensors for "eyes" and two motors that help it steer… Read more
Robotics_p012
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some familiarity with electronic circuits and using breadboards will be very helpful, though not required, for this project. Using a soldering iron is also helpful but a work-around is offered in the Procedure.
Material Availability This project requires certain parts from an electronics store or online retailer. See the Materials and Equipment list for details.
Cost Average ($40 - $80)
Safety If you use a soldering iron for this project remember that soldering irons get extremely hot and can cause burns if they touch your skin. They can also become a fire hazard if left unattended. Science Buddies recommends using lead-free solder, especially in homes with pets or small children.
1 2 >
Support for Science Buddies provided by:
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability