Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Build a Reed Switch Motor”

Showing top 20 results.
Science Fair Project Idea
In this science project, you will build what might be the world's simplest motor. It has just four basic parts: magnets, a battery, a screwdriver, and a short piece of wire. It takes only minutes to assemble, but it provides a wonderful device to explore how electricity and magnetism combine to produce a fast-spinning motor. Read more
Elec_p065
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some familiarity with basic electronics and physics would be helpful, but is not required.
Material Availability Specialty items are required. See the Materials and Equipment list for details.
Cost Average ($50 - $100)
Safety Minor injury is possible. Wear safety goggles at all times. Be sure to read the important safety notes at the beginning of the Experimental Procedure before you begin.
Science Fair Project Idea
The world's oceans are home to the most strange and amazing creatures. What do scientists know about these deep-sea animals and how can they study them easily? One way to learn about these animals in their homes is to use underwater robots. Underwater robots can record data that would be difficult for humans to gather. But what are robots and how are they made? In this robotics engineering project, you will discover what makes up a simple robot and build and test your own underwater robot. Read more
Robotics_p002
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability To build an underwater robot you will need a motor and a model boat propeller. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety You will need glue and epoxy to waterproof the motor for the robot. Follow the instructions that come with the glue and epoxy and always work in a well-ventilated area. If you have a latex allergy, you will have to exercise great caution with the balloon and ask a volunteer to help you. Keep fingers away from the spinning propeller to prevent injury. Do not test the robot in saltwater.
Science Fair Project Idea
In the animal kingdom, many different critters use whiskers to help them find their way around in the dark, through murky waters, or even to help them hunt prey. Whiskers can be very useful when the animals cannot rely on sight. Did you know that you can also build a robot that uses "whiskers" to find its way around? This project will show you how to build a simple robot that uses whiskers as "bump sensors" to help the robot detect when it is about to bump into an obstacle, so it can turn… Read more
Robotics_p028
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the Science Buddies reference [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability A kit is available from the .
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to avoid short circuits when building your robot. See the Procedure for more information.
Science Fair Project Idea
When you think of a motor, you may immediately think of a car, but you actually encounter other motors in your home every day. That's right, if you put on clean clothes from the washing machine, ate food from the fridge, or used a fan, you used an electric motor. In this electronics science project, you will make a simple electric motor with two magnets that "talk" to each other. As they interact, they will alternate between "liking" each other (pulling together), and "disliking" each other… Read more
Elec_p051
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You should be able to coil wire neatly (or find someone who can show you how) in order to make your electric motor work.
Material Availability A kit containing all the specialty items needed for this project is available from the .
Cost Low ($20 - $50)
Safety

Never try to use a wall socket as power source for your motor.

Neodymium magnets are very strong. Follow the safety guidelines in the Procedure for working with these magnets.

Science Fair Project Idea
Have you ever seen a robot dance? In this project you will build your own simple flipping, tumbling robot that can dance around on the floor or a tabletop! If you have never made a robot before and would like to get started with a fun, easy project, this is a great place to begin. You will follow directions to make a basic robot, and then make your own additions to make it even better! Read more
Robotics_p027
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This project requires robotics parts from an electronics vendor. See the Materials and Equipment list for details. Estimated project time includes shipping for the parts.
Cost Low ($20 - $50)
Safety Adult supervision is required when using a hot glue gun or super glue.
Science Fair Project Idea
Have you ever seen a cat chase a laser pointer or a flashlight beam? What if you could make a robot do that? In this project, you will build a robot that can automatically drive toward a bright light source. The robot uses a simple electronic circuit to track light, so there is no computer programming required! You can also do three other robotics projects using the same kit of parts, so this is a great way to get started with robotics before moving on to more advanced projects. Read more
Robotics_p022
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the Science Buddies reference [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability A kit is available in the .
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to follow the directions in the Procedure in order to avoid short circuits when building your robot.
Science Fair Project Idea
How easy is it for you to walk along and follow a line that is painted on the ground? Simple, right? You might be able to follow a line without giving it much thought, but how could a robot do that? In this project, you will build your own automatic line-following robot that can race around a track that you create. This technology has plenty of real-world applications—maybe one day you could help design self-driving cars! Read more
Robotics_p023
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the Science Buddies reference [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability A kit for this project is available from the .
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to follow the directions in the Procedure in order to avoid short circuits when building your robot.
Science Fair Project Idea
Do you ever wish you could hire someone to guard your favorite toys, or keep certain people from coming into your room? What if you could make a robot to do it for you? This project will show you how to build a simple security robot controlled by a motion-detecting sensor. When someone comes near your valuables or enters the room, the robot will spring to life and (hopefully) scare them away! Read more
Robotics_p024
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the Science Buddies reference [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability A kit is available at the .
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to avoid short circuits when building your robot. See the Procedure for more information.
Science Fair Project Idea
Solar cells are devices that can be used as a source of power when there is light shining on them, but they stop producing energy when they are not in the light. One way to store the solar energy for later use is to use a solar cell to charge something called a capacitor. The capacitor stores the energy as an electric field, which can be tapped into at any time, in or out of light. In this electronics science project, you will use parts of a solar car to experiment with the energy storage… Read more
Elec_p063
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability You will need to order the supercapacitor car online. See the Materials and Equipment list for details.
Cost Average ($50 - $100)
Safety No issues
Science Fair Project Idea
You may be familiar with permanent magnets—the kind that hang on a refrigerator. But did you know that other magnets, called electromagnets, can be turned on and off? When turned on, electromagnets act just like permanent magnets, but if you turn them off, their magnetic properties disappear. Electromagnets are an important part of many electronic devices, like motors, loudspeakers, and hard drives. You can create an electromagnet with a simple coil of wire and a battery. In this project,… Read more
Elec_p035
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This project requires specialty items, available in the . Estimated project time includes shipping for the kit.
Cost Low ($20 - $50)
Safety The electromagnet can become hot during periods of extended use.
1 2 >
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability