Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Human-Powered Energy”

Showing top 20 results.
Science Fair Project Idea
In the animal kingdom, many different critters use whiskers to help them find their way around in the dark, through murky waters, or even to help them hunt prey. Whiskers can be very useful when the animals cannot rely on sight. Did you know that you can also build a robot that uses "whiskers" to find its way around? This project will show you how to build a simple robot that uses whiskers as "bump sensors" to help the robot detect when it is about to bump into an obstacle, so it can turn… Read more
Robotics_p028
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability This science project requires specific circuit components from an electronics vendor. See the Materials list for details.
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to avoid short circuits when building your robot. See the Procedure for more information.
Science Fair Project Idea
What can you do with magnets and ball bearings that makes a lot of noise? Why, build a magnetic rifle, called a Gauss rifle, of course! Now, this rifle is not a weapon, but a way for you to learn a lot more about physics concepts, like momentum. In this physics science project, you will investigate how far a ball bearing launched by a Gauss rifle will fly, depending on how many magnetic acceleration stages are in the rifle and the ball bearing's initial velocity. This science project makes for… Read more
Phys_p081
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items including neodymium magnets and steel ball bearings are needed for this project. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety A Gauss rifle can produce high velocity projectiles. Do not aim the gun at anyone or anything; do not put your hand in front of the projectile. Operate the Gauss rifle safely. Be sure to read the important safety notes at the beginning of the Experimental Procedure before you begin. Scissors or other metal objects may be attracted to the magnets; use caution when using metal objects near the magnets.
Science Fair Project Idea
Have you ever wondered how a radio can grab signals that are transmitted through the air and convert them into sound? In this science project, you will build your own AM radio receiver from scratch and use it to listen to AM radio broadcasts. With your crystal radio you will be able to experiment with the circuit and the antenna to get the best reception. Read more
Elec_p014
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this science project, you must live in an area where you can receive at least one strong AM radio station. You can check for this with a car or portable radio.
Material Availability Specific circuit items are required. A Science Buddies kit is available for your convenience. See the Materials and Equipment list for details
Cost Average ($40 - $80)
Safety Never operate your crystal radio during a thunderstorm. When not in use, always disconnect your antenna from the radio circuit, and connect it directly to the ground rod. Be sure to wear safety goggles when installing the ground rod, especially if you are using a metal hammer. An adult's help might be necessary for some steps in the Procedure.
Science Fair Project Idea
Do you hate shots? Do you complain about paper cuts? Imagine if you had to give yourself shots a couple of times a day, as well as prick your finger, on purpose, even more frequently. Of course, if you have diabetes you do not have to imagine this; it is your reality. People who have diabetes usually need to keep close track of how much sugar is in their blood (called their blood glucose levels)by testing a drop of blood from a finger prick. If there is too much sugar in their blood, some… Read more
HumBio_p040
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some familiarity with electronic circuits and using breadboards would be helpful, though it is not required for this project. Completion of a basic chemistry class is also recommended before trying this project.
Material Availability A pump and other electronics parts must be specially ordered to do this project. See the Materials list for details. Estimated project time includes shipping of specialty components.
Cost Average ($40 - $80)
Safety Some parts of the circuit can get warm during normal operation. Do not leave the circuit operating when unattended. Be very careful with your wiring to prevent short circuits from happening; short circuits can get very hot and cause plastic parts of the circuit to melt.
Science Fair Project Idea
Light interacts with matter in a variety of ways—it can be absorbed, reflected, refracted (bent), and scattered. The scattering of light explains why the sky is blue, why milk is white, and why the Mississippi River is called "The Big Muddy." In this biochemistry science fair project, you will make an electronic device to measure the amount of scattered light in milk. You will also use the device to track the activity of protease (a type of enzyme) in pineapple juice, based on its ability… Read more
BioChem_p032
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites A familiarity with basic chemistry is required. Experience with simple electronics would be helpful, but is not absolutely required. Although the procedure provides step-by-step instructions, this is a DIY (do-it-yourself) science fair project that may call for some creative problem solving on your part.
Material Availability Electronic components are required. See the Materials & Equipment list for details.
Cost Average ($50 - $100)
Safety Use caution when working with laser pointers. Wear safety goggles when using the drill.
Science Fair Project Idea
If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more
Elec_p039
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law and an understanding of logarithms. Note: the biggest expense is a powered, solderless breadboard, which can be used for future explorations in electronics.
Material Availability Specialty items
Cost Very High (over $150)
Safety No issues
Science Fair Project Idea
You are right next to the basket and someone passes you the ball. Will you go for a direct shot or will you use the backboard and take a bank shot at the basket? Would different positions on the court give you a higher chance of making a shot using the backboard than others, even when keeping the distance from the hoop the same? In this science project, you will build a scale model and test different positions on the court to determine if one results in a better chance of making a bank shot… Read more
Sports_p024
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety Adult supervision is recommended when using the craft or utility knife.
Science Fair Project Idea
Solar cells are popping up on rooftops everywhere these days and are a model for clean, renewable energy. Did you ever look at those solar panels and wonder how we can get electricity produced by solar cells when the sun is not shining? It is a great question because solar panels do not produce electricity when it is dark outside. One strategy to overcome this challenge is to store the energy produced by solar cells during the day in the form of a fuel that can be used at a later time. In… Read more
Chem_p099
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Completion of a basic chemistry class is recommended before trying this science project. You should also know something about circuits, or use the [# ProjectGuide Name="Advanced.ElectronicsPrimerIntroduction" Value="HtmlAnchor" HtmlText="Science Buddies Electronics Primer" #].
Material Availability A number of specialty items are required. For your convenience a kit is available for purchase from the [# Link Name="Chem_p099.6" Value="HtmlAnchor" #].
Cost Very High (over $150)
Safety Adult supervision is recommended. Use caution when connecting the four 9V batteries. Ensure that the wires/connectors do not come in contact with each other to cause a short or the batteries will become VERY hot and can possibly cause burns. Cobalt nitrate can cause skin and eye irritation. It is recommended to wear disposable gloves when handling cobalt nitrate.
Science Fair Project Idea
An electric current produces a magnetic field. You can take advantage of this fact to make a simple apparatus to test the electrical conductivity of various materials, including both solids and liquids. The detector consists of a coil of wire, with a magnetic compass inside it. You connect one end of the coil to a D-cell battery. The other end of the coil is connected to whatever material you are testing, and the material, in turn, is connected to the other end of the D-cell. In other… Read more
Elec_p044
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
Have you ever seen a cat chase a laser pointer or a flashlight beam? What if you could make a robot do that? In this project, you will build a robot that can automatically drive toward a bright light source. The robot uses a simple electronic circuit to track light, so there is no computer programming required! You can also do three other robotics projects using the same kit of parts, so this is a great way to get started with robotics before moving on to more advanced projects. Read more
Robotics_p022
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You will need to know how to use a breadboard to do this project. See the [# ProjectGuide Name="Breadboard.Tutorial" Value="HtmlAnchor" #] if you have not used a breadboard before.
Material Availability This project requires the Science Buddies BlueBot Kit. See the Materials list for details.
Cost High ($100 - $150)
Safety Short circuits can get very hot and present a burn hazard. Be careful to follow the directions in the Procedure in order to avoid short circuits when building your robot.
< 1 2
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability