Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Shaking Up Some Energy”

Science Fair Project Idea
thumbnail You may be familiar with permanent magnets—the kind that hang on a refrigerator. But did you know that other magnets, called electromagnets, can be turned on and off? When turned on, electromagnets act just like permanent magnets, but if you turn them off, their magnetic properties disappear. Electromagnets are an important part of many electronic devices, like motors, loudspeakers, and hard drives. You can create an electromagnet with a simple coil of wire and a battery. In this science… Read more
Elec_p035
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety The electromagnet can become hot during periods of extended use.
Science Fair Project Idea
thumbnail Following a simple black line seems pretty easy, right? But think about it; how do you know what is the line and what is not the line? What if you wanted a robot to follow that line? How would it know what you wanted it to follow? Robots can use simple techniques to sense their surroundings and change their behavior based on what they see. In this engineering project, you will build your own robot that will follow a path without using complicated electronics or programming. Read more
Robotics_p021
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You should be familiar with, or be willing to learn how to wire circuits on a breadboard. A little soldering is necessary to complete this science project, so you should also be familiar with the procedure or be able to find a helpful friend or adult.
Material Availability Readily available. See the Materials and Equipment list for details.
Cost Average ($40 - $80)
Safety If you are using the coping saw to make the wheels, use caution and be sure to wear safety goggles. Some steps require soldering, which involves very high temperatures. Use caution when soldering and when using other building tools. An optional step involves a product that must used in an open area, following the manufacturer's directions.
Science Fair Project Idea
thumbnail So, you've got your popcorn and are settled into your seat at the movie. The lights dim—it's show time! But wait a second. Did you ever wonder how those lights dim so smoothly? It just wouldn't be the same if the lights suddenly snapped off, would it? In this electronics science fair project, you'll investigate dimmer switches, and even build a simple model of one. Try this project and light up your room, and your mind! Read more
Elec_p056
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety You will need an adult's assistance to use the pocket knife. Adult supervision is required.
Science Fair Project Idea
thumbnail When you think of a motor, you may immediately think of a car, but you actually encounter other motors in your home every day. That's right, if you put on clean clothes from the washing machine, ate food from the fridge, or used a fan, you used an electric motor. In this electronics science project, you will make a simple electric motor with two magnets that "talk" to each other. As they interact, they will alternate between "liking" each other (pulling together), and "disliking" each other… Read more
Elec_p051
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You should be able to coil wire neatly (or find someone who can show you how) in order to make your electric motor work.
Material Availability Specialty items are required for this science project, and are available as a Science Buddies kit. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety

Never try to use a wall socket as power source for your motor.

Neodymium magnets are very strong. Follow the safety guidelines in the Procedure for working with these magnets.

Science Fair Project Idea
An electric current produces a magnetic field. You can take advantage of this fact to make a simple apparatus to test the electrical conductivity of various materials, including both solids and liquids. The detector consists of a coil of wire, with a magnetic compass inside it. You connect one end of the coil to a D-cell battery. The other end of the coil is connected to whatever material you are testing, and the material, in turn, is connected to the other end of the D-cell. In other… Read more
Elec_p044
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
thumbnail Do you ever wish you could hire someone to guard your favorite toys, or keep certain people from coming into your room? What if you could make a robot to do it for you? This project will show you how to build a simple security robot controlled by a motion-detecting sensor. When someone comes near your valuables or enters the room, the robot will spring to life and (hopefully) scare them away! Read more
Robotics_p024
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites While no previous electronics or robotics experience is required to do this project, it will be helpful if you are familiar with basic circuit concepts and with using a breadboard. The Bibliography section in the Background tab has many tutorials you can use to get started.
Material Availability This project requires specific circuit components from an electronics vendor. See the Materials and Equipment list for details.
Cost Average ($40 - $80)
Safety Short circuits can get very hot and present a burn hazard. Be careful to avoid short circuits when building your robot. See the Procedure for more information.
Science Fair Project Idea
thumbnail Do you know how to find the north and the south poles of a magnet? What materials are more magnetic than others? Is there a way to measure how strong a magnet is? Is there a way to measure the strength of an electromagnet? How much does the material that is in the core of the electromagnet affect its magnetic strength? With this project, you'll be able to answer these questions and many others. You will learn how to build and use a simple meter for measuring magnetic field intensity. Read more
Elec_p030
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items are needed. See the Materials tab for details.
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
thumbnail Global warming, climate change, melting ice caps—these are all big events that have an impact our environment. What can we do to help reduce the impact? We can reduce, reuse, and recycle. What can cities do to help? Cities can eliminate waste by saving energy. Cities around the world are switching from incandescent traffic signals to LED traffic signals to save energy and money. That's because LEDs are more efficient than incandescent lamps, which means that LEDs produce more light… Read more
Energy_p003
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites Prior experience with using a digital multimeter
Material Availability Specialty items (see Materials list)
Cost High ($100 - $150)
Safety Since this science project deals with electricity, adult supervision is recommended. The LEDs used in this project are used in traffic signals and are very bright. Do not look directly at the LED when it is in operation and be sure to wear your sunglasses. Be sure to wear safety goggles when operating power tools.
Science Fair Project Idea
thumbnail Light interacts with matter in a variety of ways—it can be absorbed, reflected, refracted (bent), and scattered. The scattering of light explains why the sky is blue, why milk is white, and why the Mississippi River is called "The Big Muddy." In this biochemistry science fair project, you will make an electronic device to measure the amount of scattered light in milk. You will also use the device to track the activity of protease (a type of enzyme) in pineapple juice, based on its ability… Read more
BioChem_p032
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites A familiarity with basic chemistry is required. Experience with simple electronics would be helpful, but is not absolutely required. Although the procedure provides step-by-step instructions, this is a DIY (do-it-yourself) science fair project that may call for some creative problem solving on your part.
Material Availability Electronic components are required. See the Materials & Equipment list for details.
Cost Average ($50 - $100)
Safety Use caution when working with laser pointers. Wear safety goggles when using the drill.
Science Fair Project Idea
thumbnail Today magnetic recording is used in audio and video cassette recorders, and computer disk drives. Did you know that you can also use an electromagnet to record and play back from a steel wire? In fact, this is how magnetic recording got started. This project shows you how to build a simple wire recorder. Read more
Elec_p015
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety Eye protection required during construction
1 2 >
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability