Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Human-Powered Energy”

Showing top 20 results.
Science Fair Project Idea
thumbnail Global warming, climate change, melting ice caps—these are all big events that have an impact our environment. What can we do to help reduce the impact? We can reduce, reuse, and recycle. What can cities do to help? Cities can eliminate waste by saving energy. Cities around the world are switching from incandescent traffic signals to LED traffic signals to save energy and money. That's because LEDs are more efficient than incandescent lamps, which means that LEDs produce more light… Read more
Energy_p003
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites Prior experience with using a digital multimeter
Material Availability Specialty items (see Materials list)
Cost High ($100 - $150)
Safety Since this science project deals with electricity, adult supervision is recommended. The LEDs used in this project are used in traffic signals and are very bright. Do not look directly at the LED when it is in operation and be sure to wear your sunglasses. Be sure to wear safety goggles when operating power tools.
Science Fair Project Idea
If you like playing electric guitar, this could be a cool project for you. Have you ever wondered how an electric guitar works? In this project you'll wind one or more of your own electric guitar pickups and test them out in an inexpensive electric guitar. How will the sound change with the number of turns you use in the coil? Or with the strength of the magnets you use? Read more
Music_p004
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this project, you'll need an inexpensive electric guitar in which to install and test the pickup(s) you make. You'll also need a guitar amplifier.
Material Availability Readily available
Cost Very High (over $150)
Safety Adult supervision required when potting (melted wax-coating) the pickup
Science Fair Project Idea
thumbnail In this science project, you will build what might be the world's simplest motor. It has just four basic parts: magnets, a battery, a screwdriver, and a short piece of wire. It takes only minutes to assemble, but it provides a wonderful device to explore how electricity and magnetism combine to produce a fast-spinning motor. Read more
Elec_p065
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some familiarity with basic electronics and physics would be helpful, but is not required.
Material Availability Specialty items are required. See the Materials and Equipment list for details.
Cost Average ($50 - $100)
Safety Minor injury is possible. Wear safety goggles at all times. Be sure to read the important safety notes at the beginning of the Experimental Procedure before you begin.
Science Fair Project Idea
thumbnail Today magnetic recording is used in audio and video cassette recorders, and computer disk drives. Did you know that you can also use an electromagnet to record and play back from a steel wire? In fact, this is how magnetic recording got started. This project shows you how to build a simple wire recorder. Read more
Elec_p015
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety Eye protection required during construction
Science Fair Project Idea
thumbnail What can you do with magnets and ball bearings that makes a lot of noise? Why, build a magnetic rifle, called a Gauss rifle, of course! Now, this rifle is not a weapon, but a way for you to learn a lot more about physics concepts, like momentum. In this physics science project, you will investigate how far a ball bearing launched by a Gauss rifle will fly, depending on how many magnetic acceleration stages are in the rifle and the ball bearing's initial velocity. This science project makes for… Read more
Phys_p081
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items including neodymium magnets and steel ball bearings are needed for this project. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety A Gauss rifle can produce high velocity projectiles. Do not aim the gun at anyone or anything; do not put your hand in front of the projectile. Operate the Gauss rifle safely. Be sure to read the important safety notes at the beginning of the Experimental Procedure before you begin. Scissors or other metal objects may be attracted to the magnets; use caution when using metal objects near the magnets.
Science Fair Project Idea
thumbnail Have you ever wondered how a radio can grab signals that are transmitted through the air and convert them into sound? In this science project, you will build your own AM radio receiver from scratch and use it to listen to AM radio broadcasts. With your crystal radio you will be able to experiment with the circuit and the antenna to get the best reception. Read more
Elec_p014
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this science project, you must live in an area where you can receive at least one strong AM radio station. You can check for this with a car or portable radio.
Material Availability Specific circuit items are required. A Science Buddies kit is available for your convenience. See the Materials and Equipment list for details
Cost Average ($40 - $80)
Safety Never operate your crystal radio during a thunderstorm. When not in use, always disconnect your antenna from the radio circuit, and connect it directly to the ground rod. Be sure to wear safety goggles when installing the ground rod, especially if you are using a metal hammer. An adult's help might be necessary for some steps in the Procedure.
Science Fair Project Idea
thumbnail Solar cells are popping up on rooftops everywhere these days and are a model for clean, renewable energy. Did you ever look at those solar panels and wonder how we can get electricity produced by solar cells when the sun is not shining? It is a great question because solar panels do not produce electricity when it is dark outside. One strategy to overcome this challenge is to store the energy produced by solar cells during the day in the form of a fuel that can be used at a later time. In… Read more
Chem_p099
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Completion of a basic chemistry class is recommended before trying this science project. You should also know something about circuits, or use the [# ProjectGuide Name="Advanced.ElectronicsPrimerIntroduction" Value="HtmlAnchor" HtmlText="Science Buddies Electronics Primer" #].
Material Availability A number of specialty items are required. For your convenience, a Science Buddies Kit is available for purchase.
Cost Very High (over $150)
Safety Adult supervision is recommended. Use caution when connecting the four 9V batteries. Ensure that the wires/connectors do not come in contact with each other to cause a short or the batteries will become VERY hot and can possibly cause burns. Cobalt nitrate can cause skin and eye irritation. It is recommended to wear disposable gloves when handling cobalt nitrate.
Science Fair Project Idea
thumbnail Light interacts with matter in a variety of ways—it can be absorbed, reflected, refracted (bent), and scattered. The scattering of light explains why the sky is blue, why milk is white, and why the Mississippi River is called "The Big Muddy." In this biochemistry science fair project, you will make an electronic device to measure the amount of scattered light in milk. You will also use the device to track the activity of protease (a type of enzyme) in pineapple juice, based on its ability… Read more
BioChem_p032
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites A familiarity with basic chemistry is required. Experience with simple electronics would be helpful, but is not absolutely required. Although the procedure provides step-by-step instructions, this is a DIY (do-it-yourself) science fair project that may call for some creative problem solving on your part.
Material Availability Electronic components are required. See the Materials & Equipment list for details.
Cost Average ($50 - $100)
Safety Use caution when working with laser pointers. Wear safety goggles when using the drill.
Science Fair Project Idea
thumbnail In the animal kingdom, many different critters use whiskers to help them find their way around in the dark, through murky waters, or even to help them hunt prey. Whiskers can be very useful when the animals can't rely on sight. Did you know that you can also build a robot that uses whiskers to find its way around? This science project will show you how to build a simple robot that uses whiskers as "bump sensors" to help the robot detect when it is about to bump into an obstacle, so it can turn… Read more
Robotics_p028
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites While no previous electronics or robotics experience is required to do this science project, it will be helpful if you are familiar with basic circuit concepts and with using a breadboard. The Bibliography section in the Background tab has many tutorials you can use to get started.
Material Availability This science project requires specific circuit components from an electronics vendor. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety Short circuits can get very hot and present a burn hazard. Be careful to avoid short circuits when building your robot. The "whiskers" used in this project are made of narrow wire and should be handled carefully. See the Procedure for more information.
Science Fair Project Idea
thumbnail Sometimes engineers get ideas to build robots from animals in nature. There are robot dogs, robot snakes, robot birds, robot cheetahs, and even tiny robotic insects! In this science project, you will build a robot insect of your own. The robot will automatically drive toward a light source, mimicking a behavior called phototaxis, seen in some insects. You will build your own robot and then make adjustments so it can reliably drive toward a light. Read more
Robotics_p012
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Previous experience using a breadboard to build a circuit will be helpful, but is not required for this project. If you want to start out with a simpler robotics project, check out the Make It Your Own section.
Material Availability A kit containing all the electronics parts needed for this project can be found in the [# Link Name="Robotics_p026.1" Value="HtmlAnchor" #].
Cost Average ($40 - $80)
Safety No issues
< 1 2
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability