Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “'They're Not Sticking!' A Study of Gender Responses to Frustration”

Showing top 20 results.
Science Fair Project Idea
You may be familiar with permanent magnets—the kind that hang on a refrigerator. But did you know that other magnets, called electromagnets, can be turned on and off? When turned on, electromagnets act just like permanent magnets, but if you turn them off, their magnetic properties disappear. Electromagnets are an important part of many electronic devices, like motors, loudspeakers, and hard drives. You can create an electromagnet with a simple coil of wire and a battery. In this project,… Read more
Elec_p035
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This project requires specialty items, available in the . Estimated project time includes shipping for the kit.
Cost Low ($20 - $50)
Safety The electromagnet can become hot during periods of extended use.
Science Fair Project Idea
"Paper circuits" are a fun way to mix electronics and art by adding lights directly to a painting or drawing. These lights need a battery to power them, and typically you would use wires to connect them. In paper circuits, though, many materials can be substituted as "wire," including special types of paint, ink, and even aluminum foil. There are also different options for what type of battery you can use. Which materials do you think will work best? Try this project to find out! Read more
Elec_p085
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This project requires special circuit materials. See the Materials and Equipment list for details. Estimated project time includes time for shipping specialty materials.
Cost Average ($40 - $80)
Safety No issues
Science Fair Project Idea
You have probably read all about forms of alternative energy like solar and wind power. But what about human power? With the aid of a coil of wire and some magnets, you can generate electricity with nothing more than a flick of your wrist. In this project, you will build a small hand-powered electrical generator that can power a series of tiny lights. Get ready to save the planet and get some exercise at the same time! Read more
Energy_p009
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This science project requires some specialty electronic components. A kit is available from the . The Time Required estimate includes time for gathering specialty materials. The actual project only takes 1 day.
Cost Average ($40 - $80)
Safety

Neodymium magnets are very strong and can pinch your fingers when they come together. You should keep them away from pets and small children because they can cause serious harm if ingested. As with any magnet, you should keep them away from computers, cell phones, and credit cards.

Adult supervision is required when using a hobby knife.

Science Fair Project Idea
Water is an interesting thing. We drink it, swim in it, and wash ourselves with it. We can get energy from water by damming it and sending it through a turbine. But did you know that we can use the natural electrical charges present in water and a Kelvin electrostatic generator to create sparks? You can even use a Kelvin electrostatic generator to temporarily light a bulb! Now that is one bright idea! Read more
Elec_p069
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability You will need to visit your local hardware store to purchase plumbing items to build the Kelvin electrostatic generator. You will also need a hand saw, a drill, a heat gun, a digital scale, a fan, and a dehumidifier. See the Materials and Equipment list for details. Cost of the project may be lower depending on what tools you already have available.
Cost High ($100 - $150)
Safety Parts of the Kelvin electrostatic generator require use of a hand saw and a drill. Wear safety goggles when using power tools. Adult supervision is required.
Science Fair Project Idea
The world's oceans are home to the most strange and amazing creatures. What do scientists know about these deep-sea animals and how can they study them easily? One way to learn about these animals in their homes is to use underwater robots. Underwater robots can record data that would be difficult for humans to gather. But what are robots and how are they made? In this robotics engineering project, you will discover what makes up a simple robot and build and test your own underwater robot. Read more
Robotics_p002
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability To build an underwater robot you will need a motor and a model boat propeller. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety You will need glue and epoxy to waterproof the motor for the robot. Follow the instructions that come with the glue and epoxy and always work in a well-ventilated area. If you have a latex allergy, you will have to exercise great caution with the balloon and ask a volunteer to help you. Keep fingers away from the spinning propeller to prevent injury. Do not test the robot in saltwater.
Science Fair Project Idea
Global warming, climate change, melting ice caps—these are all big events that have an impact our environment. What can we do to help reduce the impact? We can reduce, reuse, and recycle. What can cities do to help? Cities can eliminate waste by saving energy. Cities around the world are switching from incandescent traffic signals to LED traffic signals to save energy and money. That's because LEDs are more efficient than incandescent lamps, which means that LEDs produce more light… Read more
Energy_p003
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites Prior experience with using a digital multimeter
Material Availability Specialty items (see Materials list)
Cost High ($100 - $150)
Safety Since this science project deals with electricity, adult supervision is recommended. The LEDs used in this project are used in traffic signals and are very bright. Do not look directly at the LED when it is in operation and be sure to wear your sunglasses. Be sure to wear safety goggles when operating power tools.
Science Fair Project Idea
Maybe somewhere in your home there's a long hallway or a stairway with a light that you can turn on from either end. It's a nice convenience, but did you ever wonder how it's wired up to work that way? The goal of this project is to build a similar circuit with switches, flashlight batteries and a flashlight bulb (obviously, household circuits are not safe to experiment with). You'll need to understand the difference between connections made in series and connections made in parallel in an… Read more
Elec_p045
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
Electricity powers many of the devices we use every day, from lights to video games and computers. Engineers have to use certain materials to make electrical devices work. In this experiment, you will find out which materials let electricity flow through them (conductors) and which ones prevent electricity from flowing through them (insulators). Read more
Elec_p018
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability For your convenience, a kit is available for this project from the . Estimated project time includes time for shipping the kit.
Cost Low ($20 - $50)
Safety Short circuits can get very hot and present a burn hazard. Never connect the positive and negative ends (red and black wires) of the battery pack directly to each other.
Science Fair Project Idea
When you think of a motor, you may immediately think of a car, but you actually encounter other motors in your home every day. That's right, if you put on clean clothes from the washing machine, ate food from the fridge, or used a fan, you used an electric motor. In this electronics science project, you will make a simple electric motor with two magnets that "talk" to each other. As they interact, they will alternate between "liking" each other (pulling together), and "disliking" each other… Read more
Elec_p051
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You should be able to coil wire neatly (or find someone who can show you how) in order to make your electric motor work.
Material Availability A kit containing all the specialty items needed for this project is available from the .
Cost Low ($20 - $50)
Safety

Never try to use a wall socket as power source for your motor.

Neodymium magnets are very strong. Follow the safety guidelines in the Procedure for working with these magnets.

Science Fair Project Idea
What do you do with your old wooden pencils when they get too short to hold? Don't throw them away; you can use them to make circuits! This project will show you how to use pencils to make resistors, an important part of many electrical circuits, and test how they affect the brightness of a lightbulb in a simple circuit. Read more
Elec_p013
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability A kit for this project is available from the . Estimated project time includes time for shipping the kit.
Cost Low ($20 - $50)
Safety Short circuits can get very hot and present a burn hazard. Never connect the positive and negative ends (red and black wires) of the battery pack directly to each other. Adult supervision is required for cutting the pencils.
1 2 >
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability