Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Wood Adhesive Durability”

Science Fair Project Idea
Try gluing wood together with different types of glue, e.g.: regular white glue, yellow wood glue, cyanoacrylate (super glue), and Liquid Nails. Glue a short piece (5-8 cm) to the center of a longer piece (15-30 cm). After the glue has dried for the recommended time, drill a small hole through the center of the joint, big enough to pass through a piece of coat-hanger wire. Cut a length of coat hanger wire, pass it through the hole, and twist the ends together to form a loop. Place the ends… Read more
CE_p021
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
Our forests are a very important natural resource that need to be managed wisely. We use wood products for many different purposes: building materials, paper, cardboard, furniture, fuel, etc. How can we use wood products in a sustainable manner? You can do experiments that examine the growth time of different tree species to see which are good candidates for tree farming. Which types of lumber are most sustainable? You can also compare the effects of clear cutting vs. thinning a forested… Read more
EnvSci_p038
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Science Fair Project Idea
The ozone layer is important for blocking most of the harmful radiation that comes from the sun. You can find maps of the ozone layer and compare different regions of the globe for ozone coverage. Where are the problem areas? Is there a difference in ozone coverage between different hemispheres? Between populated and un-populated areas? In atmospheric regions over land masses or over bodies of water? Some scientists think that aerosols in the air are breaking down the ozone layer. You can do… Read more
Weather_p014
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
How strongly do different types of nails hold in wood? Try different diameters of nails, and try pounding them to different depths. To gauge the holding strength, measure how difficult it is to remove the nail. Can you pull it out with a pair of pliers? Can you remove it with the hammer claw? Do you have to push only a little bit, moderately hard, or as hard as you can? Do you need a crowbar? What happens if you pre-drill holes for the nails, using drill bits that are different… Read more
CE_p019
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
Do you ever go camping with your family and roast hot dogs and marshmallows over a campfire? If you want your campfire to burn long into the evening, what is the best wood to use? Do research on the necessary conditions/materials to sustain a fire and on the properties of different types of wood. Which properties do you think will be most important for determining how fast the wood burns? For example, how do you think density would be related to burning rate? Why? Measure the density and… Read more
MatlSci_p026
+ More Details
- Less Details
Time Required Short (2-5 days)
Safety Adult supervision required.
Science Fair Project Idea
How much force is required to advance a lag bolt (large wood screw with a hex-shaped head) into a piece of wood? You can measure the force by using a spring scale attached to the handle of ratchet. Pull on the spring scale until the bolt starts to turn, and note the required force from the spring scale. There are many potential experiments you could try. Think about answering the following questions: How does the force change as the bolt advances deeper into the wood? Why? How does the… Read more
ApMech_p032
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
There are many types of construction materials used for wood-frame houses. Compare the different uses for and strengths of different building materials, e.g.: particle board, plywood, pine, oriented strand board (OSB), and drywall (gypsum board, SheetRock). The Science Buddies Materials Science Resource will be helpful for learning about different ways to measure material strength. You should be sure to use the same cross-sectional area of each material in order to make fair comparisons.… Read more
CE_p020
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
Does adhesive tape hang tight at different temperatures? Measure the adhesive strength of tape at both low and high temperatures. To raise the temperature, we suggest using a blow dryer at both low and high heat settings. To lower the temperature, use an ice pack (try to keep condensation from forming on the tape and confounding the results). For even lower temperatures you could try "dry ice" (frozen carbon dioxide), if available. (Wear heavy gloves when handling dry ice, because it can… Read more
MatlSci_p031
+ More Details
- Less Details
Time Required Short (2-5 days)
Science Fair Project Idea
Try different wind turbine/propeller (chord length, pitch) designs by making models from balsa wood. Connect the spinning axle to a DC motor and measure the voltage produced across a resistor to measure power output. Use fan as wind source. (Judge, 2004) Read more
Aero_p029
+ More Details
- Less Details
Time Required Average (6-10 days)
Science Fair Project Idea
Here's a project idea for all of you bakers out there. What happens if you try your favorite muffin recipe with different types of flour (e.g., white, whole wheat, rye, soy, etc.)? Think of ways you can measure the results. How would you measure the density of a muffin? A kitchen scale would definitely be useful for this project, both for measuring the results and for portioning out the batter for equal-sized muffins. What other measures might be of interest? (Nakajima, 2005) Read more
MatlSci_p029
+ More Details
- Less Details
Time Required Short (2-5 days)
1 2 >
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability