Home Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “It's Hard Work to Work Harden! Learn How to Make Metals Stronger”

Project Idea
thumbnail You may be familiar with permanent magnets—the kind that hang on a refrigerator. But did you know that other magnets, called electromagnets, can be turned on and off? When turned on, electromagnets act just like permanent magnets, but if you turn them off, their magnetic properties disappear. Electromagnets are an important part of many electronic devices, like motors, loudspeakers, and hard drives. You can create an electromagnet with a simple coil of wire and a battery. In this science… Read more
Elec_p035
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety The electromagnet can become hot during periods of extended use.
Project Idea
thumbnail Have you ever wondered how a radio can grab signals that are transmitted through the air and convert them into sound? In this science project, you will build your own AM radio receiver from scratch and use it to listen to AM radio broadcasts. With your crystal radio you will be able to experiment with the circuit and the antenna to get the best reception. Read more
Elec_p014
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this science project, you must live in an area where you can receive at least one strong AM radio station. You can check for this with a car or portable radio.
Material Availability Specific circuit items are required. A Science Buddies kit is available for your convenience. See the Materials and Equipment list for details
Cost Average ($40 - $80)
Safety Never operate your crystal radio during a thunderstorm. When not in use, always disconnect your antenna from the radio circuit, and connect it directly to the ground rod. Be sure to wear safety goggles when installing the ground rod, especially if you are using a metal hammer. An adult's help might be necessary for some steps in the Procedure.
Project Idea
thumbnail "Gross! What is that in the toilet?" But maybe it's not just gross. Did you know there are bacteria that digest organic waste and create electrons? What if there was a way to collect those electrons to power a circuit? In this science fair project, you will make a microbial fuel cell to collect the electrons that the bacteria—anaerobic bacteria—create...only, you'll be using mud, which is much safer to handle than wastewater. If you would like to learn how to reuse and recycle an… Read more
Energy_p026
+ More Details
- Less Details
Time Required Very Long (1+ months)
Prerequisites You will need to be familiar with the procedures for handling biologically hazardous material. Read the [# ProjectGuide Name="Advanced.MicroorganismsSafetyGuide" Value="HtmlAnchor" HtmlShortTitle="true" #] from the Science Buddies Project Guide to learn more about handling biologically hazardous materials. You also need to have access to a lower-order stream of water or a creek. See the Introduction for an explanation of this type of stream. Try to avoid streams in which the bed is rocky. The benthic mud sample should be from an area that has a thick, rich mud bed.
Material Availability Specialty items required
Cost High ($100 - $150)
Safety Adult supervision is recommended. Be careful when using a hot stove and a drill. Remember to always wear safety goggles when drilling. Exercise caution when working near a stream or creek. Water currents can be stronger than they look.
Project Idea
thumbnail In this biology science fair project, you will observe how the Physarum polycephalum (P. polycephalum) organism responds to various amounts of glucose. P. polycephalum is easy to grow in a petri dish and responds in complex ways to its environment. Will it grow toward the chemical as it looks for a meal, or will it flee, trying to avoid further contact? Try this science fair project to learn more about chemotaxis in the fascinating Physarum polycephalum. Read more
MicroBio_p028
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites An introductory course in chemistry would be useful.
Material Availability You will need to order the "Chemotaxis in Physarum" kit online; see the Materials and Equipment list for details. This item may have to be ordered by your teacher.
Cost Average ($50 - $100)
Safety Be careful working with sharp blades. Adult supervision is recommended.
Project Idea
Here's a practical engineering challenge: you need to build an enclosure for your dogs, using material that they can't chew through. It's going to be a lot of work to build, so you want to do it right. What material should you choose for the fencing? This project uses the scientific method to evaluate materials. Read more
MatlSci_p018
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety No issues
Project Idea
thumbnail Piezoelectric barbecue fire starters work by creating a spark that ignites the volatile lighter fluid, which then starts the charcoal burning. They are low current, high voltage devices. How high does the voltage have to get to make a spark in air? This project shows you a way to find out by with an inexpensive experimental setup to measure the distance that the spark can travel between two spherical electrodes. Read more
Elec_p032
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety Adult supervision recommended
Project Idea
thumbnail In baseball, coaches use hit charts to track the results of every hit each player makes, giving a measure of the player's performance. Have you ever wondered what things affect where a baseball goes when a player hits it with a bat? In this project you will set up an experiment to hit a ping pong ball in a controlled manner using a toy catapult, then learn about the physics of baseball by making your own hit chart. Read more
Sports_p060
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this project, you should understand what a coordinate system is and know how to make a simple scatter plot.
Material Availability This science project requires a kit available from the Science Buddies store. See the Materials and Equipment list for details. Estimated project time includes shipping.
Cost Average ($40 - $80)
Safety Never launch projectiles at people or animals. Be careful not to get your fingers caught in the moving parts of the catapult.
Project Idea
thumbnail Here is a riddle for you: name an instrument that you play with your hands but never actually touch. Have you guessed the answer? It is a theremin! This unusual instrument makes sound without anyone touching it. How does a theremin work? It has an antenna that can detect the player's hand nearby, and as they move their hand around the theremin, the sound it makes changes based on the hand's position. In this music science project, you will get to use your own mini theremin to investigate… Read more
Music_p035
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability The Theremin Mini Kit for this science project needs to be specially ordered. See the Materials and Equipment list for details.
Cost Average ($40 - $80)
Safety No issues
Project Idea
thumbnail Here is a project that is almost like a magic trick: with a strong magnet and a simple apparatus you can build yourself, you can make a coin "walk" up and down a wire coat hanger! This project is an interesting way to learn about the distance over which magnetic forces act on magnetic materials. Read more
Phys_p024
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Specialty items
Cost Low ($20 - $50)
Safety Use strong magnets with care! See safety notes below.
Project Idea
thumbnail Noise is everywhere. From the clanking of a cowbell to the din of the lunchroom, we are surrounded by noise. Sometimes there's no way to get away from it, but there is a way to deal with it—constrained-layer damping. By simply creating a layered sandwich of somewhat flexible materials, what was once a noisy cowbell can become a "noise blanket." This science fair project shows you how to transform a noisy piece of metal into a sound-muffling constrained-layer damper. You'll record the… Read more
ApMech_p040
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability You must have access to a basic PC with a built-in or simple external microphone and sound card (most recent computers include all that is needed), as well as a sound program like AudacityTM.
Cost Low ($20 - $50)
Safety Use caution when using the tin snips. Adult supervision is recommended.
< 1 2
Support for Science Buddies provided by:
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability