Home Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Make Your Own Piezoelectric Pickup for Acoustic Guitar”

Science Fair Project Idea
If you like playing electric guitar, this could be a cool project for you. Have you ever wondered how an electric guitar works? In this project you'll wind one or more of your own electric guitar pickups and test them out in an inexpensive electric guitar. How will the sound change with the number of turns you use in the coil? Or with the strength of the magnets you use? Read more
Music_p004
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this project, you'll need an inexpensive electric guitar in which to install and test the pickup(s) you make. You'll also need a guitar amplifier.
Material Availability Readily available
Cost Very High (over $150)
Safety Adult supervision required when potting (melted wax-coating) the pickup
Science Fair Project Idea
thumbnail Here's a fun science project for anyone who plays an electric guitar. You'll learn about the physics of vibrating strings, and find out why the tone of your guitar changes when you switch between the different pickups. Read more
Music_p006
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites To do this project you need to have an electric guitar and guitar amplifier. You'll need to know enough about playing the instrument to produce clear, ringing tones by picking (or plucking) the string.
Material Availability Readily available
Cost Very Low (under $20)
Safety No issues
Science Fair Project Idea
thumbnail Have you ever wondered how a radio can grab signals that are transmitted through the air and convert them into sound? In this science project, you will build your own AM radio receiver from scratch and use it to listen to AM radio broadcasts. With your crystal radio you will be able to experiment with the circuit and the antenna to get the best reception. Read more
Elec_p014
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this science project, you must live in an area where you can receive at least one strong AM radio station. You can check for this with a car or portable radio.
Material Availability Specific circuit items are required. A Science Buddies kit is available for your convenience. See the Materials and Equipment list for details
Cost Average ($40 - $80)
Safety Never operate your crystal radio during a thunderstorm. When not in use, always disconnect your antenna from the radio circuit, and connect it directly to the ground rod. Be sure to wear safety goggles when installing the ground rod, especially if you are using a metal hammer. An adult's help might be necessary for some steps in the Procedure.
Science Fair Project Idea
thumbnail Today magnetic recording is used in audio and video cassette recorders, and computer disk drives. Did you know that you can also use an electromagnet to record and play back from a steel wire? In fact, this is how magnetic recording got started. This project shows you how to build a simple wire recorder. Read more
Elec_p015
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety Eye protection required during construction
Science Fair Project Idea
thumbnail If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more
Elec_p039
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law and an understanding of logarithms. Note: the biggest expense is a powered, solderless breadboard, which can be used for future explorations in electronics.
Material Availability Specialty items
Cost Very High (over $150)
Safety No issues
Science Fair Project Idea
thumbnail Electronic devices can be designed to detect dangerous fumes or other hazards, such as smoke or carbon monoxide. In this electronics project, you will build another potentially life-saving detector—a radon detector. Radon gas is radioactive and can pose a hazard to your health if you live in an area where it leaks from the ground. In this electronics science project, you will learn how to collect radon with an ordinary dusting cloth mounted on the intake of a fan, and then measure its… Read more
Elec_p064
+ More Details
- Less Details
Time Required Very Long (1+ months)
Prerequisites Since the goal of this science project is to measure radon gas, you should have access to an area that has previously tested positive for radon with a commercial radon detection system. See the Experimental Procedure section for details. This is an advanced science project that will require creative problem solving on your part.
Material Availability While most of the parts for this science project are readily available, you might need to be creative about finding or making some of the parts.
Cost High ($100 - $150)
Safety Wear safety goggles when drilling and soldering. Adult supervision is recommended.
Science Fair Project Idea
thumbnail Have you ever wondered how an AM radio station works? In this project you will learn the basics of how your favorite songs are transmitted by a radio station, by building your own simple AM radio transmitter. You will learn the basics of how a transmitter works, and how you are able to tune to your favorite station and listen to music. Read more
Elec_p024
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety No issues
Science Fair Project Idea
thumbnail Global warming, climate change, melting ice caps—these are all big events that have an impact our environment. What can we do to help reduce the impact? We can reduce, reuse, and recycle. What can cities do to help? Cities can eliminate waste by saving energy. Cities around the world are switching from incandescent traffic signals to LED traffic signals to save energy and money. That's because LEDs are more efficient than incandescent lamps, which means that LEDs produce more light… Read more
Energy_p003
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites Prior experience with using a digital multimeter
Material Availability Specialty items (see Materials list)
Cost High ($100 - $150)
Safety Since this science project deals with electricity, adult supervision is recommended. The LEDs used in this project are used in traffic signals and are very bright. Do not look directly at the LED when it is in operation and be sure to wear your sunglasses. Be sure to wear safety goggles when operating power tools.
Science Fair Project Idea
thumbnail This is a good project for someone who is interested in both electronics and color vision. The equipment needed is on the expensive side, but if you continue studying electronics, you can use it again and again. Read more
Elec_p038
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this project you should be familiar with Ohm's Law. Experience building electronic circuits on a solderless breadboard is also helpful. The breadboard is the biggest expense, which can be used for future explorations in electronics.
Material Availability Specialty items
Cost Very High (over $150)
Safety Adult supervison required when using power drill.
Science Fair Project Idea
thumbnail The banjo's roots trace all the way over to Africa. The unique sound that a banjo makes depends, in part, on the resonator. The purpose of the resonator is to amplify and project the sound that is made by strumming and plucking the strings. In this music science fair project, you will experiment with a resonator on a banjo and see if you can hear the difference in sound. Read more
Music_p029
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You must have access to a computer with a microphone, a spreadsheet program,and an Internet connection. You need to have a basic proficiency with and be able to graph data in the spreadsheet program. If you need help, consult a help guide online or find an adult who is familiar with the spreadsheet program you are using.
Material Availability Readily available
Cost Low ($20 - $50)
Safety Minor injury is possible. Always wear safety goggles and use caution when using tools. Adult supervision is required.
1 2 >
Support for Science Buddies provided by:
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability