Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Roaming Robots: Build Your Own Underwater Robot”

Science Fair Project Idea
thumbnail Do you want to trick friends and visitors with an amazing optical illusion? In this engineering design project you will learn how to build an infinity mirror,with built-in lights that make the mirror look like a deep tunnel with no end. But pick the mirror up and look behind it, and you will see that it is only a couple of inches thick! Read this project to find out not only how this illusion works, but how to design and build your very own infinity mirror from scratch. Read more
Elec_p080
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This project will require some specialty materials from hardware and arts and craft stores. See the Materials and Equipment list for details.
Cost Average ($40 - $80)
Safety Adult supervision is required when using any sharp cutting tools or power tools to cut plexiglass. Always wear safety glasses or goggles when cutting brittle materials such as plexiglass. Some tools (in particular, hot glue guns and soldering irons) can cause serious burns. Use these carefully and with adult supervision.
Science Fair Project Idea
thumbnail This is a good project for someone who is interested in both electronics and color vision. The equipment needed is on the expensive side, but if you continue studying electronics, you can use it again and again. Read more
Elec_p038
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this project you should be familiar with Ohm's Law. Experience building electronic circuits on a solderless breadboard is also helpful. The breadboard is the biggest expense, which can be used for future explorations in electronics.
Material Availability Specialty items
Cost Very High (over $150)
Safety Adult supervision required when using power drill.
Science Fair Project Idea
thumbnail Objects that glow in the dark hold a special place in the imagination of both children and adults. The lights go out at night, but these odd things refuse to disappear. Where does the light come from? Do they work in any climate? In this science fair project, you will build an electronic device that measures the light given off by luminescent materials. The device will be used to study how temperature affects luminescence. Read more
Chem_p072
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites A familiarity with basic chemistry is required. Also, some experience with electronics would be helpful. Although the circuit is fairly straightforward, especially if you use the kit, this is a DIY ("do-it-yourself") project that will call for some creative problem solving on your part.
Material Availability Any phosphorescent material will work for this project. If you want to use super-bright phosphorescent paints, they are available online. See the Materials & Equipment list for more information.
Cost High ($100 - $150)
Safety Use caution when using the drill or knife. Wear safety goggles when using the drill.
Science Fair Project Idea
thumbnail If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more
Elec_p039
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites Understanding of Ohm's Law and an understanding of logarithms. Note: the biggest expense is a powered, solderless breadboard, which can be used for future explorations in electronics.
Material Availability Specialty items
Cost Very High (over $150)
Safety No issues
Science Fair Project Idea
thumbnail Do you hate shots? Do you complain about paper cuts? Imagine if you had to give yourself shots a couple of times a day, as well as prick your finger, on purpose, even more frequently. Of course, if you have diabetes you do not have to imagine this; it is your reality. People who have diabetes usually need to keep close track of how much sugar is in their blood (called their blood glucose levels)by testing a drop of blood from a finger prick. If there is too much sugar in their blood, some… Read more
HumBio_p040
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some familiarity with electronic circuits and using breadboards would be helpful, though it is not required for this project. Completion of a basic chemistry class is also recommended before trying this project.
Material Availability A pump and other electronics parts must be specially ordered to do this project. See the Materials and Equipment list for details. Estimated project time includes shipping of specialty components.
Cost Average ($40 - $80)
Safety Some parts of the circuit can get warm during normal operation. Do not leave the circuit operating when unattended. Be very careful with your wiring to prevent short circuits from happening; short circuits can get very hot and cause plastic parts of the circuit to melt.
Science Fair Project Idea
thumbnail The makers of sports drinks spend tens to hundreds of millions of dollars advertising their products each year. Among the benefits often featured in these ads are the beverages' high level of electrolytes, which your body loses as you sweat. In this science project, you will compare the amount of electrolytes in a sports drink with those in orange juice to find out which has more electrolytes to replenish the ones you lose as you work out or play sports. When you are finished, you might even… Read more
Chem_p053
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability You will need a digital multimeter for this science fair project. See the Materials and Equipment list for more details.
Cost Average ($40 - $80)
Science Fair Project Idea
thumbnail Have you ever wanted to build your very own robot from scratch? Bristlebots are a cheap, easy, and fun-to-build robot made from the head of a toothbrush, a battery, and a small motor. Once completed, they buzz along the top of a table like bugs. How can you make a bristlebot go faster? In this project, you will build bristlebots from two different types of toothbrushes, and race them against each other to find out. Read more
Robotics_p010
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Motors and batteries to do this project are available in a kit from Science Buddies. The kit can also be used to do several other robotics projects. See the Materials and Equipment list for details. Estimated project time includes time to ship the kit.
Cost Low ($20 - $50)
Safety Adult supervision is required when cutting the head off a toothbrush.
Science Fair Project Idea
thumbnail You may be familiar with permanent magnets—the kind that hang on a refrigerator. But did you know that other magnets, called electromagnets, can be turned on and off? When turned on, electromagnets act just like permanent magnets, but if you turn them off, their magnetic properties disappear. Electromagnets are an important part of many electronic devices, like motors, loudspeakers, and hard drives. You can create an electromagnet with a simple coil of wire and a battery. In this science… Read more
Elec_p035
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety The electromagnet can become hot during periods of extended use.
Science Fair Project Idea
thumbnail How do you feel when you ride your bike into a strong wind? Do your legs feel like lead? How about when the wind is at your back? Does that make you feel ready for the Tour de France? In this science fair project, you will investigate how wind-powered devices, like pinwheels, also react in different ways to the direction of the wind. Read more
Energy_p025
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety No issues
Science Fair Project Idea
thumbnail Have you ever gotten a shock touching a doorknob after walking across a carpet? Static charge is responsible for that shock. Wouldn't it be cool to save up and store all of that charge in a homemade jar? It would almost be like storing lightning. This science project will show you how to do that. Read more
Elec_p049
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Average ($50 - $100)
Safety Since this experiment deals with electricity, it is best to have an adult supervise. A mild to moderate electric shock is possible if care is not taken. Follow all directions as stated.
< 1 2
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability