Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Others Like “Racing Bristlebots: On Your Mark. Get Set. Go!”

Science Fair Project Idea
thumbnail From traffic safety lights to neon signs, lights have a way of getting peoples’ attention. So it makes sense that if a person wants to get attention, wearing clothing with built-in lights might help. These types of clothing, called electronic textiles (or e-textiles for short) already exist. Instead of using hard surfaces for circuits (like inside your computer or cell phone), e-textiles weave electrical parts like batteries, wires, and lights directly into wearable clothing so it can do… Read more
Elec_p076
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Familiarity with basic electronics concepts like positive and negative terminals as well as open and closed circuits will be helpful for this science project. Students with no experience building circuits may want to try the simpler but thematically simlar project: [# ProjectIdea Name="Elec_p077" Value="HtmlAnchor" #].
Material Availability This science project requires special LEDs designed for use with e-textiles, and it will be much easier to do with a soldering iron. See the Materials and Equipment list for details.
Cost Average ($40 - $80)
Safety Soldering irons can get extremely hot and burn your skin if you touch them accidentally. They can also cause fires if left unattended. Adult supervision is required when using a soldering iron, especially if you are not familiar with using one. Science Buddies recommends using lead-free solder, especially in homes with pets and small children.
Science Fair Project Idea
thumbnail Are you artistic? Do you enjoy creating art? Some may think that art is something only humans can make, but what about robots: can they be artistic? They can if you build them that way. In this robotics engineering project, you will build a robot that creates art. And who knows? Someday your robot art may be worth millions! Read more
Robotics_p005
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This robotics engineering project requires you to purchase VEX® robotics materials. See the Materials and Equipment list for details. With a little problem-solving, you may be able to substitute another robotics platform.
Cost Very High (over $150)
Safety Use caution with tools when assembling the robot. Minor injury is possible.
Science Fair Project Idea
thumbnail Have you ever tried to ride your bike up a flight of stairs? Vehicles with wheels are great at traveling on paved roads or flat ground, but when it comes to stairs or uneven ground in the woods, wheels are not always such a great option. Inspired by real-life all-terrain robots, in this engineering project you will design and build a LEGO® robot that can travel over bumpy ground, through your yard, or even up a stack of textbooks — and almost anything else you can think of! Read more
Robotics_p009
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Experience building with LEGO® and programming for LEGO® Mindstorms® is required for this project.
Material Availability This project requires a LEGO® Mindstorms® NXT kit and compatible programming software. See the Materials and Equipment list for details.
Cost Very High (over $150)
Safety No issues
Science Fair Project Idea
thumbnail Electronic devices can be designed to detect dangerous fumes or other hazards, such as smoke or carbon monoxide. In this electronics project, you will build another potentially life-saving detector—a radon detector. Radon gas is radioactive and can pose a hazard to your health if you live in an area where it leaks from the ground. In this electronics science project, you will learn how to collect radon with an ordinary dusting cloth mounted on the intake of a fan, and then measure its… Read more
Elec_p064
+ More Details
- Less Details
Time Required Very Long (1+ months)
Prerequisites Since the goal of this science project is to measure radon gas, you should have access to an area that has previously tested positive for radon with a commercial radon detection system. See the Experimental Procedure section for details. This is an advanced science project that will require creative problem solving on your part.
Material Availability While most of the parts for this science project are readily available, you might need to be creative about finding or making some of the parts.
Cost High ($100 - $150)
Safety Wear safety goggles when drilling and soldering. Adult supervision is recommended.
Science Fair Project Idea
thumbnail Do you like making things with play dough or modeling clay? Wouldn't it be cool if you could add a bunch of lights to your creations? In this science project, you will make play dough that conducts electricity, and we will introduce you to some new types of circuits so you can add more lights to your artistic creations. This science project is the second in a three-part series on "squishy circuits," which can all be done with the same materials. We recommend doing the science projects in order. Read more
Elec_p074
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You should understand the Introduction material in Make Your Play Dough Light Up, Buzz, & Move!—the first science project in the "Electric Play Dough" series—before doing this science project.
Material Availability This science project requires a Squishy Circuits Kit and ingredients to make conductive and insulating play dough. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety Ask for an adult's help when using the stove to make the conductive play dough. Never connect the battery pack's terminals directly to each other; this is called a short circuit and can make the batteries and wires get very hot. Do not connect the LEDs directly to the battery pack without using play dough; this will burn out the LEDs.
Science Fair Project Idea
thumbnail Science Buddies has several fun robotics projects, like the and , where you use arts and crafts materials, like plastic cups or foam board to make the body of a robot. Have you ever wanted to design a more-advanced, sturdier, or fancier looking robot? Then computer-aided design (CAD) and 3D printing might be for you; both are simpler than you think! The directions on this page will give you an introduction to these technologies so you can design and print your own robot. Figure 1, below,… Read more
Robotics_p025
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Readily available
Cost Average ($40 - $80)
Safety No issues
Science Fair Project Idea
thumbnail Imagine telling your friends about your latest science project: using a battery to make a light turn on. You might get some blank stares...sounds a little boring and basic, right? Now tell them you will do it with a potato! Yes, you can actually turn fruits and vegetables into electric power sources! Batteries power many things around you, including cell phones, wireless video game controllers, and smoke detectors. In this science project, you will learn about the basics of battery science and… Read more
Energy_p010
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This science project requires specialty electronics items. A Science Buddies kit is available. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety Do not eat the potatoes after they have been used as batteries.
Science Fair Project Idea
thumbnail Today magnetic recording is used in audio and video cassette recorders, and computer disk drives. Did you know that you can also use an electromagnet to record and play back from a steel wire? In fact, this is how magnetic recording got started. This project shows you how to build a simple wire recorder. Read more
Elec_p015
+ More Details
- Less Details
Time Required Long (2-4 weeks)
Prerequisites None
Material Availability Specialty items
Cost Average ($50 - $100)
Safety Eye protection required during construction
Science Fair Project Idea
thumbnail The makers of sports drinks spend tens to hundreds of millions of dollars advertising their products each year. Among the benefits often featured in these ads are the beverages' high level of electrolytes, which your body loses as you sweat. In this science project, you will compare the amount of electrolytes in a sports drink with those in orange juice to find out which has more electrolytes to replenish the ones you lose as you work out or play sports. When you are finished, you might even… Read more
Chem_p053
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability You will need a digital multimeter for this science fair project. See the Materials and Equipment list for more details.
Cost Average ($40 - $80)
Science Fair Project Idea
thumbnail In this science project, you will build what might be the world's simplest motor. It has just four basic parts: magnets, a battery, a screwdriver, and a short piece of wire. It takes only minutes to assemble, but it provides a wonderful device to explore how electricity and magnetism combine to produce a fast-spinning motor. Read more
Elec_p065
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Some familiarity with basic electronics and physics would be helpful, but is not required.
Material Availability Specialty items are required. See the Materials and Equipment list for details.
Cost Average ($50 - $100)
Safety Minor injury is possible. Wear safety goggles at all times. Be sure to read the important safety notes at the beginning of the Experimental Procedure before you begin.
< 1 2
Support for Science Buddies provided by:
Search Refinements
Areas of Science
Behavioral & Social Science
Earth & Environmental Science
Engineering
Life Science
Math & Computer Science
Physical Science
Difficulty
 
Cost
Time
Material Availability