I have built the light sensing Bluebot is not working. I have tried connecting this more than 4 times and it doesn't work. Would you help me resolve this issue. It is time sensitive and I would greatly appreciate it if someone can guide/help me.
Thanks,
Nate
Light tracking Bluebot - not working
Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators
-
- Posts: 1
- Joined: Tue Dec 28, 2021 5:04 pm
- Occupation: Student
-
- Site Admin
- Posts: 581
- Joined: Mon Aug 22, 2016 4:39 pm
- Occupation: Administrator
- Project Question: -
- Project Due Date: -
- Project Status: Not applicable
Re: Light tracking Bluebot - not working
Nate - is anything happening with the BlueBot? Do the wheels spin at all?
We recommend going back through the setup steps for the circuit on the breadboard carefully to make sure everything is in the right position.
You will also want to go back through the steps to set up the potentiometers.
Sharing a photo of your circuit can help someone take a look to help troubleshoot.
Amy
Science Buddies
[Project: https://www.sciencebuddies.org/science- ... #procedure]
We recommend going back through the setup steps for the circuit on the breadboard carefully to make sure everything is in the right position.
You will also want to go back through the steps to set up the potentiometers.
Sharing a photo of your circuit can help someone take a look to help troubleshoot.
Amy
Science Buddies
[Project: https://www.sciencebuddies.org/science- ... #procedure]