Posts: 1
Joined: Sun Nov 25, 2007 2:42 pm


Postby carlyben » Sun Dec 02, 2007 11:54 am

My science fair topic is : the effects of heating and cooling on the strength of glass.

I need major help as to how I would go about conducting this experiment, as in what my procedures should look like and what my variable should be.

My project is due tomorrow and I need help ASAP! PLEASE!

Former Expert
Posts: 404
Joined: Tue Sep 18, 2007 3:27 pm
Occupation: Research Assistant

Postby staryl13 » Sun Dec 02, 2007 12:31 pm

For future reference, don't expect an immediate answer, although the experts will try to respond to your questions as soon as possible. Thanks!
As for your project, sounds like a really cool topic! You might want to check out some background information first:
In this case, you are testing the effect of heating and cooling (your independent variables) on the strength of glass (the dependent variable). You would have to determine some method of measuring the strength of glass. Most methods today would be quite dangerous and are usually tested for commerical purposes so you might want to ask your parents first. Heating and cooling the glass might be a challenge as well because it would require extreme temperatures. Hope it helps, good luck!
"There is a single light of science, and to brighten it anywhere is to brighten it everywhere." -Isaac Asimov

Former Expert
Posts: 260
Joined: Thu Aug 25, 2005 7:44 am
Occupation: Software Engineer/QA Lead - Quality, Risk Assessment, Statistics, Problem Solving

Postby bradleyshanrock-solberg » Mon Dec 03, 2007 7:23 pm

If it is due tomorrow, you've waited too long to ask help.

To do this kind of experiment you need to have

1. several pieces of glass, identical in shape and composition
2. several different methods of heat treating them
3. a way to safely test the strength of glass.
4. be reasonably certain that #2 didn't mechancially ruin the glass,
so the only thing being tested is the change in composition due to
heat (ie, if you cracked the glass heat treating it, that test is ruined)

#3 is usually a destructive test of some kind - I did those kinds of tests in my graduate research and the equipment we used isn't normally found in a highschool laboratory. It's not too fancy, it just is too specialized for most schools and possibly too expensive. The differences are probably small, so you need fairly sensitive equipment. A hardness test (as opposed to "strength") is a lot easier. There's a simple hand tool (name escapes me for the moment) that does something similar to hitting an awl with a punches into your material and you can measure the dent made. Glass might be too hard for it, or too brittle though.

#2 requires a kiln or furnace of some kind. Some schools have this, usually to work on pottery or the like.

#1 will require buying glass samples, although something like a microscope slide might work nicely and be cheap and reasonably

Bottom line needed to be thinking about all this a long time ago. Even if you had all the tools lined up (furnace, stress testing equipment, glass) it would take more time than you have just to perform the experiment, much less measure the results.

Return to “Grades 6-8: Physical Science”