night light project
Moderators: kgudger, bfinio, MadelineB, Moderators
-
- Posts: 1
- Joined: Sat Nov 14, 2020 5:05 pm
- Occupation: Student
night light project
i did everything in the breadboard diagram but its not working please help me
-
- Former Expert
- Posts: 38
- Joined: Fri Sep 11, 2020 12:37 pm
- Occupation: Expert
- Project Question: I'm here to help you find answers science questions and point you in directions to learn more.
- Project Due Date: N/A
- Project Status: Not applicable
Re: night light project
Dear student2331,
Without additional information, it is difficult to provide help. Are you working on this Science Buddies project?
https://www.sciencebuddies.org/science- ... ht#summary
If so, I would start by making sure the power supply is good. Check that the batteries are good and in the correct position (+/-). Then, consider checking the resistance across each component with a multimeter. If you don't have a multimeter, then try replacing each component, one-by-one.
A photo of your breadboard would also be helpful.
Best regards,
Dr. Payne
Without additional information, it is difficult to provide help. Are you working on this Science Buddies project?
https://www.sciencebuddies.org/science- ... ht#summary
If so, I would start by making sure the power supply is good. Check that the batteries are good and in the correct position (+/-). Then, consider checking the resistance across each component with a multimeter. If you don't have a multimeter, then try replacing each component, one-by-one.
A photo of your breadboard would also be helpful.
Best regards,
Dr. Payne