self propeller vehicle
Posted: Wed Mar 12, 2014 6:41 am
Design a mechanically self propelling vehicle which will travel at least 75cm in a STRAIGHT LINE and then steer itself off course to avoid a brick kept at a distance of 1m from the starting point.
NOTE:
*Initially all wheels of the car should be placed in a line parallel to the perpendicular reference axis as shown in figure.
*The car must steer left / right only after travelling for a distance of 75cm in a straight line
*Once you let go of the vehicle from the starting position, you are not allowed to externally apply force by any means.
*Use of electric/electronic components is NOT permitted
NOTE:
*Initially all wheels of the car should be placed in a line parallel to the perpendicular reference axis as shown in figure.
*The car must steer left / right only after travelling for a distance of 75cm in a straight line
*Once you let go of the vehicle from the starting position, you are not allowed to externally apply force by any means.
*Use of electric/electronic components is NOT permitted