Shaddow
Posts: 3
Joined: Fri Dec 16, 2011 12:30 pm
Occupation: Student: 10th grade

Re: SciBud Wind Tunnel Questions

Postby Shaddow » Thu Dec 22, 2011 6:54 pm

Hello again,

I have a question on the wind-speed meter (the personal fan) used in the wind tunnel. How through the information that it gathers does it tell you what the speed is? Do you have to plug the data from it in a equation or what to get it into a common form (like Miles-Per-Hour)?

AerospaceGuy
Former Expert
Posts: 93
Joined: Fri Apr 20, 2007 5:55 pm
Occupation: Expert

Re: SciBud Wind Tunnel Questions

Postby AerospaceGuy » Thu Dec 29, 2011 8:01 pm

Hi Shaddow,

Yes, you'll have to find a way to convert the voltage output reading from the personal fan anemometer into airspeed. There are many creative ways of doing this, and it takes a little scientific thought. Do you have any ideas of how to do it? You mentioned an equation, but the relationship between wind speed and voltage is going to be defined by your specific tunnel setup, so you will most likely need to create a function of conversion yourself by taking multiple data points at multiple different known airspeeds (perhaps using another anemometer, to match the voltage reading with the second one's airspeed reading).

Does that make sense?
O God, Thy sea is so great, and my boat is so small!
-Anonymous

Notenougheducation
Posts: 2
Joined: Thu Apr 05, 2012 6:47 pm
Occupation: Sales

Re: SciBud Wind Tunnel Questions

Postby Notenougheducation » Thu Apr 05, 2012 7:19 pm

I dont know how to pose questions ,who can I talk to and how can I proceed ?

Notenougheducation
Posts: 2
Joined: Thu Apr 05, 2012 6:47 pm
Occupation: Sales

Re: SciBud Wind Tunnel Questions

Postby Notenougheducation » Thu Apr 05, 2012 7:22 pm

Since my questions are varied , but one has to do with creating energy with a device that creates air flow it might help with wind tunnel and also many others as I am certain it can and will produce energy

AerospaceGuy
Former Expert
Posts: 93
Joined: Fri Apr 20, 2007 5:55 pm
Occupation: Expert

Re: SciBud Wind Tunnel Questions

Postby AerospaceGuy » Mon Apr 09, 2012 4:51 pm

Hello,

To find the right place to post your questions, first go to the board index (http://www.sciencebuddies.org/science-fair-projects/phpBB3/index.php), then select your grade level, then the scientific field to which your question applies.

Your device that makes energy using air flow would best be asked in the Physical Sciences section of your grade level. The one you are on at the moment is specifically for questions regarding the wind tunnel presented on Sciencebuddies.org.

Good luck with all your questions!
O God, Thy sea is so great, and my boat is so small!
-Anonymous

sbollt
Posts: 1
Joined: Mon Sep 03, 2012 8:04 am
Occupation: Student 9th grade

Re: SciBud Wind Tunnel Questions

Postby sbollt » Wed Sep 05, 2012 7:04 am

Hi. I am building a wind tunnel to test models of cars I will make. It is important that the values I get from testing the cars can be scaled up to compare it to that of full sized cars. How do I get the same Re, scaled lift, and scaled drag from a 1/24 scale model car compared to that of the real thing? (the car will be 3in wide out of 6ft of an average car). thank you. :D

gsjbjt
Posts: 4
Joined: Sun Oct 07, 2012 7:41 pm
Occupation: Student: 10th Grade

Re: SciBud Wind Tunnel Questions

Postby gsjbjt » Mon Nov 19, 2012 9:14 pm

Hi,
A quick question: Approximately how long does it take to build this wind tunnel? Is it plausible to complete it in a 1-month time frame? I am testing various drag reduction techniques but I would hope that the bulk of the experiment would be actual airfoil testing and not building the wind tunnel.
Thanks for your time!

Chinwe
Posts: 9
Joined: Sun Sep 25, 2011 6:10 pm
Occupation: Student 9th grade

Re: SciBud Wind Tunnel Questions

Postby Chinwe » Mon Dec 10, 2012 6:23 pm

Hello, I was thinking of putting a barometer in my wind tunnel to measure air pressure. I would like to hear your opinion on measuring air pressure, and what kind of barometer you would use and how and where you would put it in the tunnel. Thanks!

startr
Posts: 1
Joined: Sat May 31, 2014 10:08 am
Occupation: research

Re: SciBud Wind Tunnel Questions

Postby startr » Sat May 31, 2014 10:22 am

Hi,
I wanted to ask about wind tunnel force sensor setup. As i can see in this link http://www.sciencebuddies.org/science-f ... -toc.shtml
The sensor are connected simply to two screw rods perpendicularly each other(one for drag one for lift).I think the rods are welded to each other other. Is that all ? I have got some force sensors capable to measure upto 10 N, so can we simple make a setup like you and can measure drag and accurately. Also is there any data available for drag and lift for airfoil, ?
Many thanks


Return to “Grades 9-12: Wind Tunnel”