Voice Recognition Arduino - Record Untrained

Ask questions about projects relating to: aerodynamics or hydrodynamics, astronomy, chemistry, electricity, electronics, physics, or engineering.

Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators

Post Reply
vdallabetta
Posts: 2
Joined: Thu Feb 15, 2024 4:21 pm
Occupation: Teacher

Voice Recognition Arduino - Record Untrained

Post by vdallabetta »

We are using an Arduino Uno to train voice commands for a lamp. We are able to train the "On" and "Off" commands using Train 0 and Train 1. Both are trained successfully When we attempt to load the commands we keep getting a "Record Untrained" response. We have tried almost every Baud Rate available, and are certain that our hardware is connected properly and functioning. Any suggestions would be greatly appreciated.
bfinio
Expert
Posts: 759
Joined: Mon Aug 12, 2013 2:41 pm
Occupation: Science Buddies Staff
Project Question: Expert
Project Due Date: n/a
Project Status: Not applicable

Re: Voice Recognition Arduino - Record Untrained

Post by bfinio »

Hi - can you post a screenshot of exactly what you're seeing in the serial monitor window? In particular compare to this timestamp in the video:

https://youtu.be/YZ0SOAFXVAQ?si=An0Y-WoGVEeXZ3WN&t=238

here three commands are recorded, loaded with "load 0 1 2". If you only trained two commands it should be "load 0 1". If that line is off at all and doesn't match the numbers you trained - for example if you type "load 1 2" because you forgot that it starts counting at zero (we've had users make that mistake before) - you may get that error.
vdallabetta
Posts: 2
Joined: Thu Feb 15, 2024 4:21 pm
Occupation: Teacher

Re: Voice Recognition Arduino - Record Untrained

Post by vdallabetta »

bfinio
Expert
Posts: 759
Joined: Mon Aug 12, 2013 2:41 pm
Occupation: Science Buddies Staff
Project Question: Expert
Project Due Date: n/a
Project Status: Not applicable

Re: Voice Recognition Arduino - Record Untrained

Post by bfinio »

Hi - hmm, I can't tell what's going wrong from your screenshot. I am finding several forum threads discussing the same issue that unfortunately don't have a solution:

https://github.com/elechouse/VoiceRecog ... 3/issues/9

https://github.com/elechouse/VoiceRecog ... /issues/14

https://github.com/elechouse/VoiceRecog ... /issues/25

One user mentions contacting the manufacturer and getting a new unit shipped to them, which then worked.

Some of the posts are as recent as two weeks ago, so this may be an issue with a defective batch of boards. I would try contacting the seller to see if you can get a refund or a replacement unit. If it still doesn't work you might want to try another speech recognition unit, we have a tutorial for a different brand here: https://youtu.be/z4Az6-MwPJ4?si=hsDZ92pJUGw5Voh2
Post Reply

Return to “Grades 6-8: Physical Science”