Question about DIY Mini Drone activity: not lifting

Ask questions about projects relating to: aerodynamics or hydrodynamics, astronomy, chemistry, electricity, electronics, physics, or engineering.

Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators

Post Reply
harveyyoyo
Posts: 1
Joined: Wed Feb 08, 2023 10:17 am
Occupation: Teacher

Question about DIY Mini Drone activity: not lifting

Post by harveyyoyo »

I made the drone as instructed. Everything seems correct. The propellers are spinning the right direction and I can feel the wind pushing down. One strange problem. There doesnt seem enough power to lift the drone. The batteries are fine.
What could be causing this?





-------------------------------------
Leave this to help the Experts:
The activity can be viewed at: DIY Mini Drone
AmyCowen
Site Admin
Posts: 581
Joined: Mon Aug 22, 2016 4:39 pm
Occupation: Administrator
Project Question: -
Project Due Date: -
Project Status: Not applicable

Re: Question about DIY Mini Drone activity: not lifting

Post by AmyCowen »

Hi - Propellers spinning is good!

One thing to check -- Does the drone slide up and down the dowels easily without getting stuck if you just move it with your hand? If the guides are too tight or the dowels are misaligned, this can cause too much friction and prevent the drone from moving, even if the motors are working fine.

If that seems fine, how many batteries are you using? If you are currently using a 3xAA battery pack, you might want to try using a 4xAA battery pack instead for more power.

Amy
Science Buddies
Post Reply

Return to “Grades 6-8: Physical Science”