Science Buddies: "Ask an Expert"

Hi! I am building the Microbial fuel Cell that I found as "Waste Not, Want Not". I am wondering if anyone has done this project or knows anything about it. I am having very much trouble finding nickel epoxy and acrylic cement. If you have any suggestions to where I can find these materials or a comparable product, please let me know! Thanks for your help!

The experiment lists the following source for acrylic cement:

Adhesive, like acrylic cement or DevCon Plastic Welder; available at your local plastics store, such as TAP Plastics www.tapplastics.com. Use an adhesive that will bond plastics. You could also try silicone adhesive/sealant, available at all hardware and building supply stores.

For the nickel epoxy, you can use any conductive cement such as "Wire Glue", available at Amazon.com: http://www.amazon.com/American-Science- ... 328&sr=1-1 or you can purchase it from Edmund Scientific: http://www.scientificsonline.com/electr ... bonds.html

Good luck, and have fun with this exciting project!

Thank you so much! You have been VERY helpful! I was at somewhat of a standstill with building my project, and now that i will be able to find these supplies, I can continue to move forward with it! Thanks again!