Winglets in Wind Tunnels
|Areas of Science||
Aerodynamics & Hydrodynamics
|Time Required||Very Long (1+ months)|
|Prerequisites||Experience building airfoils, access to a wind tunnel for testing.|
|Material Availability||Specialty Items (wind tunnel for testing airfoils)|
|Cost||High ($100 - $150)|
AbstractWinglets are the short vertical "fins" at the wingtips of some airplanes. Have you ever wondered why they are there? If you have access to a wind tunnel, you can build model airfoils with and without winglets and see for yourself. If you're really ambitious, you can also build your own wind tunnel.
The goal of this project is to measure the changes in airfoil performance when winglets are added to the airfoil.
Cite This PageGeneral citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.
Last edit date: 2020-07-03
The Boeing jet in the picture at right has winglets at the tips of its wings. Why are they there? What do they do?
As an airplane moves through the air, the wings generate lift by creating an area of low pressure above the upper surface of the wing. The higher air pressure beneath the lower surface of the wing lifts the plane. At the tip of the wing, the high and low pressure air meet.
The air forms miniature tornadoes, called wing tip vortices that spread out behind the plane. Wing tip vortices cause two problems: the turbulent airflow they create can be strong enough to flip an airplane that encounters it and they also increase the drag forces on the airplane that generates them, decreasing fuel efficiency.
The air forms miniature tornadoes, called wing tip vortices that spread out behind the plane (see Figure 1, right). Wing tip vortices cause two problems:
- the turbulent airflow they create can be strong enough to flip an airplane that encounters it;
- they also increase the drag forces on the airplane that generates them, decreasing fuel efficiency.
The airflow around winglets is complex. Your wind tunnel should include smoke or fog in the airflow so that you can visualize streamlines along the length of the airfoil. Figure 2, illustrates some design considerations you may wish to consider for the winglets (Hepperle, 2006). A gradual curve transitioning from airfoil to winglet may help to reduce turbulent flow at the corner region. Translating the winglet toward the trailing edge of the airflow can also promote laminar flow at the trailing edge of the wingtip.
Winglet designs including: no winglet, rounded corner, sharp corner, and winglet translated toward trailing edge.
In this project, you will test airfoils built both with and without winglets in a wind tunnel. Do you see evidence for wing tip vortices when testing airfoils without winglets? Does the addition of winglets alleviate wing tip vortices? Do the winglets increase lift? For winglet-related project ideas that do not require a wind tunnel, see the Variations section.
Terms and Concepts
To do this project, you should do research that enables you to understand the following terms and concepts:
- Chord line
- Mean camber line
- Aspect ratio
- Angle of attack
- Wing tip vortices
- What are the forces acting on an airfoil in a wind tunnel?
- How will the addition of winglets affect these forces?
- How will the addition of winglets affect flight performance?
- You'll definitely want to check out NASA's Beginner's Guide to Aeronautics. This site is packed with useful information on the science of flight. The Guided Tours of the BGA make it easy to navigate through groups of related pages:
NASA, 2005a. "Guided Tours of the Beginner's Guide to Aeronautics," NASA, Glenn Research Center. Retrieved June 8, 2006.
- Here are some sources of information on winglets:
News Feed on This Topic
Materials and Equipment
To do this experiment you will need the following materials and equipment:
- Materials for building model airfoils, e.g.:
- Balsa wood for framework
- Tissue paper covering
- Modeling knife
- Airplane dope
- (Alternatively, airfoil sections can be shaped from solid pieces of balsa or other wood.)
- Wind tunnel for testing airfoils
- Do your background research so that you are knowledgeable about the terms, concepts, and questions above.
- Construct two or more airfoils, identical in shape except for the presence/absence of winglets. See Figure 2 in the Introduction for ideas on different winglet designs you might wish to consider.
- Test your airfoils in a wind tunnel. The measurements that you are able to make will depend on the instrumentation available. Desirable measurements are:
- visualization of streamlines at the wing tip (using smoke or fog).
If you like this project, you might enjoy exploring these related careers:
- For a much more basic project on winglets using paper airplanes, see the Science Buddies project Why Winglets?.
- The simple folded airplanes used in the project just mentioned normally lack vertical stabilizers. Vertical stabilizers counteract imbalances in lift between the two wings, and thus resist forces that would tend to make the plane roll. In this simple type of paper airplane, winglets can function as vertical stabilizers. Another type of paper airplane (made with laminated construction methods) generally does include a vertical stabilizer as part of the design. For more details, see the Science Buddies project What Makes a Good Aerodynamic Design? Test Your Ideas with High-Performance Paper Gliders. Do winglets improve the flight characteristics of high-performance paper gliders?
Recent Feedback Submissions
|Sort by Date||Sort by User Name|
What was the most important thing you learned?
that everything you do has to be the same every time.
What problems did you encounter?
wiring takes the most time if you create your own wind tunnel like i did.
Can you suggest any improvements or ideas?
Science Buddies materials are free for everyone to use, thanks to the support of our sponsors. What would you tell our sponsors about how Science Buddies helped you with your project?
Overall, how would you rate the quality of this project?
What is your enthusiasm for science after doing your project?
Compared to a typical science class, please tell us how much you learned doing this project.
|Do you agree?||Report Inappropriate Comment|
Ask an ExpertThe Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.
Ask an Expert
News Feed on This Topic
Looking for more science fun?
Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.Find an Activity
Explore Our Science Videos
Vibration & Sound: Make Sprinkles Dance
Gel Electrophoresis and Forensic Science: Biotechnology Science Fair Project
Two-Stage Balloon Rocket Introduction