Jump to main content

Make Your Own pH Paper

1
2
3
4
5
912 reviews
Log In

This feature requires that you be logged in as a Google Classroom teacher and that you have an active class in Google Classroom.

If you are a Google Classroom teacher, please log in now.

For additional information about using Science Buddies with Google Classroom, see our FAQ.

Abstract

This is a simple "kitchen chemistry" project about acid/base chemistry. Scientists measure the acidity or alkalinity of a solution using a logarithmic scale called the pH scale. In this project you'll learn about the pH scale, and you'll make your own pH indicator paper using a pH-sensitive dye that you'll extract from red cabbage. You can use your pH paper to measure the acidity/alkalinity of various household solutions.

Summary

Areas of Science
Difficulty
 
Time Required
Short (2-5 days)
Prerequisites
None
Material Availability
Lab filter paper can be purchased from our partner Amazon.com.
Cost
Very Low (under $20)
Safety
Adult supervision required. Do not mix strong acids and bases.
Credits

Andrew Olson, Ph.D., Science Buddies

Objective

The goal of this project is to make your own pH indicator paper, and use it to measure the acidity and alkalinity of various solutions from around your house.

Introduction

In this project you will learn how to make your own pH paper that you can use to find out if a solution is acidic or basic (alkaline). What does it mean for a solution to be acidic or alkaline?

It all has to do with hydrogen ions (abbreviated with the chemical symbol H+). In water (H2O), a small number of the molecules dissociate (split up). Some of the water molecules lose a hydrogen and become hydroxyl ions (OH). The "lost" hydrogen ions join up with water molecules to form hydronium ions (H3O+). For simplicity, hydronium ions are referred to as hydrogen ions H+. In pure water, there are an equal number of hydrogen ions and hydroxyl ions. The solution is neither acidic or basic.

An acid is a substance that donates hydrogen ions. Because of this, when an acid is dissolved in water, the balance between hydrogen ions and hydroxyl ions is shifted. Now there are more hydrogen ions than hydroxyl ions in the solution. This kind of solution is acidic.

A base is a substance that accepts hydrogen ions. When a base is dissolved in water, the balance between hydrogen ions and hydroxyl ions shifts the opposite way. Because the base "soaks up" hydrogen ions, the result is a solution with more hydroxyl ions than hydrogen ions. This kind of solution is alkaline.

Acidity and alkalinity are measured with a logarithmic scale called pH. Here's why: A strongly acidic solution can have one hundred million million (100,000,000,000,000) times more hydrogen ions than a strongly basic solution! The flip side, of course, is that a strongly basic solution can have 100,000,000,000,000 times more hydroxide ions than a strongly acidic solution. Moreover, the hydrogen ion and hydroxide ion concentrations in everyday solutions can vary over that entire range. In order to deal with these large numbers more easily, scientists use a logarithmic scale, the pH scale. Each one-unit change in the pH scale corresponds to a ten-fold change in hydrogen ion concentration. The pH scale ranges from 0 to 14. It's a lot easier to use a logarithmic scale instead of always having to write down all those zeros! By the way, notice how one hundred million million is a one with fourteen zeros after it? It's not coincidence, it's logarithms!

To be more precise, pH is the negative logarithm of the hydrogen ion concentration:

pH = log 1/[H]+ = −log [H+] .

The square brackets around the H+ automatically mean "concentration" to a chemist. What the equation means is just what we said before: for each 1-unit change in pH, the hydrogen ion concentration changes ten-fold. Pure water has a neutral pH of 7. pH values lower than 7 are acidic, and pH values higher than 7 are alkaline (basic). Table 1 has examples of substances with different pH values (Decelles, 2002; Environment Canada, 2002; EPA, date unknown).

Table 1. The pH Scale: Some Examples

pH Value H+ Concentration
Relative to Pure Water
Example
0 10 000 000 battery acid
1 1 000 000 sulfuric acid
2 100 000 lemon juice, vinegar
3 10 000 orange juice, soda
4 1 000 tomato juice, acid rain
5 100 black coffee, bananas
6 10 urine, milk
7 1 pure water
8 0.1 sea water, eggs
9 0.01 baking soda
10 0.001 Great Salt Lake, milk of magnesia
11 0.000 1 ammonia solution
12 0.000 01 soapy water
13 0.000 001 bleach, oven cleaner
14 0.000 000 1 liquid drain cleaner

In this project you will make your own pH paper from a colored indicator that you will extract from red cabbage by cooking it in water. Once you have the indicator solution, you can soak some lab filter paper in it. Then allow the paper to dry. When the paper is dry, you can cut it into strips, and you'll have pH paper that will change color. It will turn greenish when exposed to bases, and reddish when exposed to acids. How green or how red? That's your job! Use different solutions that you have around the house to find out how the color change corresponds to changes in pH.

Terms and Concepts

To do this project, you should do research that enables you to understand the following terms and concepts:

Questions

Bibliography

References about acids, bases and the pH scale:

This document (which you'll need to save on you computer to view) has instructions for making several different-colored pH indicators, including beet juice, phenolphthalein (from laxative tablets), red cabbage, and turmeric:

These webpages have a quick review of exponents and logarithms:

Materials and Equipment

To do this experiment you will need the following materials and equipment:

Disclaimer: Science Buddies participates in affiliate programs with Home Science Tools, Amazon.com, Carolina Biological, and Jameco Electronics. Proceeds from the affiliate programs help support Science Buddies, a 501(c)(3) public charity, and keep our resources free for everyone. Our top priority is student learning. If you have any comments (positive or negative) related to purchases you've made for science projects from recommendations on our site, please let us know. Write to us at scibuddy@sciencebuddies.org.

Experimental Procedure

Safety Notes:
  • Adult supervision required.
  • Do not mix strong acids and bases.
  • Use appropriate caution when testing the pH of household cleaning solutions (like ammonia). Avoid skin contact, and follow all precautions on the product label.
  1. Do your background research so that you are knowledgeable about the terms, concepts, and questions, above.
  2. Prepare a red cabbage indicator solution (the "Experiments with Acids and Bases" webpage (Carboni, 2004) has great pictures illustrating all of the steps)
    1. Slice a head of cabbage at approximately 3 cm (1 in) intervals, or peel the leaves from the head and tear them into pieces.
    2. Place the leaves in the cooking pot and cover with water.
    3. Cook on medium heat for half an hour (low boil is good).
    4. Allow the cooked cabbage to cool. Then pour off the liquid into a bowl. You can pour through a strainer to catch the cabbage pieces, as shown in Figure 1 below, or hold them back with a large, flat ladle with holes.
    5. The solution is a deep blue, but will change color when the pH changes. (You can experiment with using the liquid as a pH indicator.)

    Boiled cabbage solution being poured over a strainerImage Credit: Madeline Sides, Science Buddies / Science Buddies

    Figure 1. Use a strainer, as in this picture, to separate the blue indicator liquid from the cooked cabbage leaves.

  3. Here's how to make pH paper using the red cabbage solution and lab filter paper:
    1. As shown in Figure 2 below, soak 5 sheets of filter paper in the red cabbage solution for about 30 minutes
    2. Drain the excess solution from the sheets of filter paper, and set them out in a single layer on some paper towels to dry overnight. To speed up the drying process, you can put them on a cookie sheet and put them in your oven at low temperature (150-200°F).
    3. When the sheets of filter paper are dry, cut them into strips (for example, 2.5 cm x 11 cm).
    4. The strips are now ready to test the pH of various solutions. They start out blue, but will turn green in basic solutions and red in acidic solutions.

    Sheets of lab filter paper soaking in strained cabage solutionImage Credit: Madeline Sides, Science Buddies / Science Buddies

    Figure 2. Sheets of lab filter paper should be soaked in the cabbage solution for 30 minutes before draining and drying.

  4. Use the strips to test the acidity/alkalinity of various solutions around your house. For example:
    • Lemon juice, vinegar
    • Orange juice, soda
    • Tomato juice, acid rain
    • Black coffee, bananas
    • Milk, saliva
    • Pure water
    • Sea water, eggs
    • Baking soda solution
    • Milk of magnesia
    • Ammonia solution
    • Soapy water
    • Note: if you test the pH of saliva, do not put the pH paper in your mouth! Instead, spit some saliva into a clean container and dip the paper into the saliva.
  5. After testing, put the pH strips in order of increasing pH of the solution tested.
    1. You can use the table in the Introduction as a guide.
    2. The Variations section has some additional suggestions for independent confirmations of the pH readings.
  6. Do you see a gradual change in color as the pH of the tested solutions varies? Can you match specific colors to certain pH levels? Over what range of pH does the color continue to change? How accurately do you think you can determine the pH of a solution with your test papers? Within 1, 2, or 3 pH units?
icon scientific method

Ask an Expert

Do you have specific questions about your science project? Our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Global Connections

The United Nations Sustainable Development Goals (UNSDGs) are a blueprint to achieve a better and more sustainable future for all.

This project explores topics key to Industry, Innovation and Infrastructure: Build resilient infrastructure, promote sustainable industrialization and foster innovation.

Variations

  • Compare the performance of your homemade pH paper with commercial pH paper (can be found in a well-stocked tropical fish store). Or, buy an inexpensive pH meter and use it to calibrate your homemade pH paper. Use the table in the Introduction to make a series of different solutions, form low to high pH. Measure the pH of each solution with the pH meter (rinse off the tip between solutions), and write down the results. Now check each solution with your pH paper. Can you see color differences that correspond to the measured changes in pH? Over what pH range do you see color changes? How large does the shift in pH need to be in order to see a change in color?
  • Try making pH indicator solutions (and/or indicator papers) from other natural dyes: for example beet juice, phenolphthalein, or turmeric powder (Beckham, date unknown; Krampf, 2006). Test your household solutions with each of the indicators. Does the additional information from multiple indicators give you a better measure of the pH of your solutions? Hint:Make sure to do some background reading on each of the natural dyes you try. Some may only change color in very limited pH ranges, if at all.
  • Does the pH of your saliva change after eating various types of food? If so, how much time does it take to return to normal? Design an experiment to find out. Again, do not put the pH paper in your mouth. Instead, spit some saliva into a clean container and dip the pH paper into the saliva. Also, don't try changing the pH of your saliva with anything non-edible!
  • What is the pH of rainwater in your area? Can you measure it with your pH paper or pH indicator solutions?
  • For a simpler experiment that uses a pH indicator solution instead of pH paper, see the Science Buddies project Cabbage Chemistry.

Careers

If you like this project, you might enjoy exploring these related careers:

Career Profile
Chemical engineers solve the problems that affect our everyday lives by applying the principles of chemistry. If you enjoy working in a chemistry laboratory and are interested in developing useful products for people, then a career as a chemical engineer might be in your future. Read more
Career Profile
What makes it possible to create high-technology objects like computers and sports gear? It's the materials inside those products. Materials scientists and engineers develop materials, like metals, ceramics, polymers, and composites, that other engineers need for their designs. Materials scientists and engineers think atomically (meaning they understand things at the nanoscale level), but they design microscopically (at the level of a microscope), and their materials are used macroscopically… Read more

News Feed on This Topic

 
, ,

Cite This Page

General citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.

MLA Style

Science Buddies Staff. "Make Your Own pH Paper." Science Buddies, 3 Mar. 2022, https://www.sciencebuddies.org/science-fair-projects/project-ideas/Chem_p041/chemistry/make-your-own-ph-paper?class=AQVpYA0G8vJsYmWyGsclerH1gZnMSV_aaIFONqNX8Y5lIGnuAOy__86-z-rOGfreGnWvTXlCi2396wseSJprWLBA. Accessed 25 Apr. 2024.

APA Style

Science Buddies Staff. (2022, March 3). Make Your Own pH Paper. Retrieved from https://www.sciencebuddies.org/science-fair-projects/project-ideas/Chem_p041/chemistry/make-your-own-ph-paper?class=AQVpYA0G8vJsYmWyGsclerH1gZnMSV_aaIFONqNX8Y5lIGnuAOy__86-z-rOGfreGnWvTXlCi2396wseSJprWLBA


Last edit date: 2022-03-03
Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.