Smart Medicine Cabinet: Build a Sensor That Reminds Patients When to Take Medication

Abstract

Have you ever had to take prescription medicine to get over an illness? To get better, it is important to take the medication in the proper manner and at the proper time. Wouldn't it be cool if there were a tool or piece of automated equipment that held your medicine and reminded you to take it? A tool that would know when you picked up the bottle and took your medicine? Building a smart medicine cabinet is what this science project is all about!

Introduction

Making a new tool can be a daunting experience, but if you think about it in pieces, it becomes more manageable. For example, the medicine cabinet should contain some kind of sensor that senses when the medicine bottle has been picked up. It should have a microcontroller that monitors the "pickups," and a computer that takes input from the microcontroller and issues information and alerts.

This science project can be as simple or as involved as you'd like it to be. You could simply demonstrate a sensor that registers when a medicine bottle has been placed on it. Or add to the sensor by attaching a microcontroller, an Getting Started with Arduino would be a good choice, that interfaces with a computer. Then you could write a computer program that displays instructions to the user to remind him or her of the medication schedule. An interface would allow the user to input the medication schedule and signal to the user that it is time to take a medication. Finally, you could add LEDs (light emitting diodes) that act as indicators to the user.

Regardless of how complex you decide to make this science project, the first step is to build an electrical sensor that senses when a medicine bottle has been picked up or placed on it. This sensor should be based on a voltage divider. A voltage divider is a circuit that is used to supply a voltage that is different than the available battery or power supply. Figure 1, below, shows the sensor circuit in two modes. The red squares are conductive metal pads. Figure 1.a. shows the sensor when there is no bottle in place. Here, since there is no connection between the metal pads, current moves through the two resistors (the voltage divider). Figure 1.b. shows the sensor when a bottle is in place. In this case, the bottle bridges the gap and current flow is through the metal pads and the lesser of the two resistors. If you decide to stop with building the electrical sensor, then you will need a digital multimeter to monitor the voltage change (if you need help using a multimeter, check out the Science Buddies resource How to Use a Multimeter).

If you would like to extend the science project with a microcontroller board, you can learn more about the Arduino Uno, a popular microcontroller, on the Science Buddies Getting Started with Arduino page. The tutorial will step you through how to buy and set up an Arduino.

Building a smart medicine cabinet might sound complicated, but remember, every big project can be broken down into smaller more manageable pieces! And this is a project that could certainly be a big help to you or to anyone you know who is taking medication.

Credits

Cite This Page

General citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.

MLA Style

APA Style

Last edit date: 2020-11-20

Experimental Procedure

For this science project you will need to develop your own experimental procedure. Use the information in the summary tab as a starting place. If you would like to discuss your ideas or need help troubleshooting, use the Ask An Expert forum. Our Experts won't do the work for you, but they will make suggestions and offer guidance if you come to them with specific questions.

If you want a Project Idea with full instructions, please pick one without an asterisk (*) at the end of the title.

Ask an Expert

The Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Ask an Expert

Related Links

• Science Fair Project Guide
• Other Ideas Like This
• Electricity & Electronics Project Ideas
• My Favorites

If you like this project, you might enjoy exploring these related careers:

Looking for more science fun?

Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.

Find an Activity