Solid Motor Rocket Propulsion
|Time Required||Long (2-4 weeks)|
|Material Availability||Readily available|
|Cost||Average ($50 - $100)|
|Safety||Must follow the National Association of Rocketry, Model Rocket Safety Code.|
AbstractWhat does it take to launch a satellite to explore Mars, or a mission to the moon? This project has several possible variations for exploring the physics of rockets. This is rocket science!
The objective of this project is to measure changes in a rocket's performance based on differences in the rocket's motor.
(1) Barber, Trip. "Model Rocketry in Science Fairs." National Association of Rocketry. http://nar.org/pdf/science_fair_rocketry.pdf, accessed October 2, 2004.
Cite This PageGeneral citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.
Last edit date: 2018-03-14
Model rockets utilize small, commercially-manufactured rocket engines to enable speeds of up to several hundred miles per hour, while reaching altitudes as high as several thousand feet. By following the National Association of Rocketry, Model Rocket Safety Code, you can experiment with the aerodynamics of these rockets with almost complete safety. And, there are many possible experiments you can undertake (see "Variations" below).
Model rockets can make for an extremely fun and exciting science fair project!
Terms and Concepts
To do an experiment in this area, you should do research that enables you to understand the following terms and concepts:
- The four forces in flight: weight, thrust, drag, and lift
- Key concepts having to do with rocket engines: combustion chamber, propellant, nozzle, F=ma, specific impulse, total impulse
- The equation for thrust (advanced students)
In addition, study the Model Rocket Safety Code and the proper means to construct a rocket.
Be sure to study the model rocketry sections (among others) of NASA's Beginner's Guide to Aeronautics. This excellent NASA website includes a rocket simulator called RocketModeler, as well as a nozzle simulator.
- NASA. (n.d.). Guided Tours of the Beginner's Guide to Aeronautics (BGA). Retrieved May 9, 2014, from http://www.grc.nasa.gov/WWW/K-12/airplane/guided.htm
This book is an excellent resource about model rocketry, containing a wealth of information on rocket design, construction, and competition.
- Stine, G.H. and Stine, B. Handbook of Model Rocketry, 7th Edition. John Wiley & Sons, 2004.
This is an excellent introduction to model rocket motors:
- LUNAR. (2008, January). All About Rocket Engines. Retrieved May 9, 2014, from http://www.lunar.org/docs/handbook/motors.shtml
You can find a wealth of general information at these sites:
- The National Association of Rocketry. Retrieved March 7, 2018, from http://www.nar.org/
- Apogee Components. (n.d.). New to Model Rocketry? Retrieved May 9, 2014, from http://www.apogeerockets.com/New_to_Model_Rocketry
Altitude tracking is important for many experiments in rocketry. These links contain excellent information about how to measure your rocket's altitude:
- Apogee Components. (2002, November 11). Finding Your Rocket's Altitude Using Single Station Tracking. Apogee Peak of Flight Newsletter: Issue 92. Retrieved May 9, 2014, from https://www.apogeerockets.com/education/downloads/newsletter92.pdf
- Apogee Components. (2002, November 27). Achieve High Accuracy Results: How to Perform 2-Station Altitude Tracking. Apogee Peak of Flight Newsletter: Issue 93. Retrieved May 9, 2014, from https://www.apogeerockets.com/education/downloads/Newsletter93.pdf
News Feed on This Topic
Materials and Equipment
Model rocketry supplies can be purchased at many hobby stores. Two of the primary manufacturers are:
The National Association of Rocketry offers these tips for experimentation(1):
- Plan to do at least three flights of identical rockets with identical engines for each variable that you want to test. There is a lot of "scatter" in the data from rocket-based experiments, and you will get much better results if you use the average of three or more flights for a data point rather than a single flight. This scatter is the result of a combination of experimental error (such as in measuring altitude), weather-based variations (such as in measuring parachute flight duration), and/or slight differences in the construction of the rocket or the motor. If you understand statistics, having multiple data averaged into a single point gives you the opportunity to impress the judges with an analysis of standard deviations and confidence intervals in your data.
- Measuring a rocket's maximum altitude accurately is not easy, but is generally the best way to show conclusively how differences in rocket characteristics affect performance. Altitude measurement should be done using data from at least two trackers who look at the flight from different directions but about the same distance, and who communicate by radio to make their measurements at the same moment in the rocket's trajectory. This is generally either at the exact highest point or "apogee" or (this is easier) at the moment of parachute ejection. Using the more complex tripod-mounted trackers that measure both horizontal "azimuth" angle as well as vertical "elevation" angle gives far more accurate results than simple hand-held elevation-only trackers.
- Measuring a rocket's flight duration is fairly easy, but the data is generally only useful for demonstrating differences in the performance of recovery systems (such as parachutes of various sizes) rather than the rocket....
- Make sure that you vary only one variable between flights. The height a rocket reaches depends on the engine type and delay time; the smoothness of the surface finish on the rocket; the weight of the rocket; and the shape/size/alignment of the rocket and all its parts (fins, launch lug, nose, etc.). How long it stays up depends on how high it goes, plus on the type and size of the recovery system, the weather conditions, and whether the recovery device deploys fully and properly. If your hypothesis is that rockets with one shape of nose go higher than with another shape, for example, make sure the rockets you test are identical in design, liftoff weight, and surface finish and fly them in the same weather conditions off the same launcher. Make sure that the nose cone difference is the only difference. And use identical motors (preferably from the same pack or with the same date-of-manufacture code on the casing) in all your tests of the two different rockets.
If you like this project, you might enjoy exploring these related careers:
The National Association of Rocketry suggests these possible experiments dealing with propulsion(1):
- Rocket engine average thrust vs altitude. What difference does it make in tracked altitude performance if the same rocket is flown with two engines of very different average thrust levels (like the Estes A3 or A8) but the same total impulse and liftoff weight?
- Multi-staging vs single staging. Which goes higher, a two-stage design with a B motor in each stage, or a single-stage model with a C motor having the same total impulse as the combined total of the two B motors?
- Rocket weight vs altitude. How much difference does the weight of a rocket (with variable weights in its payload compartment) make in how high it goes with a given engine?
Recent Feedback Submissions
|Sort by Date||Sort by User Name|
What was the most important thing you learned?
I did nothing
What problems did you encounter?
Can you suggest any improvements or ideas?
Science Buddies materials are free for everyone to use, thanks to the support of our sponsors. What would you tell our sponsors about how Science Buddies helped you with your project?
Overall, how would you rate the quality of this project?
What is your enthusiasm for science after doing your project?
Compared to a typical science class, please tell us how much you learned doing this project.
|Do you agree?||Report Inappropriate Comment|
Ask an ExpertThe Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.
Ask an Expert
News Feed on This Topic
Looking for more science fun?
Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.Find an Activity
Explore Our Science Videos
Stretchy Balloons! Fun STEM Activity
BlueBot 4-in-1 Robotics Kit
Make a Water Strider - STEM Activity