Log In
Abstract
This project is an experiment in classical physics. You'll be following in Galileo's footsteps, and investigating Newton's laws of motion, but you'll be taking advantage of modern video recording technology to make your measurements. Sure, it's been done before, but if you do it yourself, you can get a firm understanding of these important concepts.Summary
Areas of Science
Difficulty
Time Required
Short (2-5 days)
Prerequisites
None
Material Availability
Readily available
Cost
Low ($20 - $50)
Safety
No issues
Credits
Andrew Olson, Ph.D., Science Buddies
Sources
This project is based on:
- Masukawa, J.M., 2003. Relation between Acceleration and Angle of Inclination, California State Science Fair Abstract. Retrieved September 25, 2006.
Objective
The objective of this project is to determine the relation between elapsed time and distance traveled when a moving object is under constant acceleration.
Introduction
You know from experience that when you ride your bike down a hill, it's easy to go fast. Gravity is giving you an extra push, so you don't have to do all the work with the pedals. You also know from experience that the longer the hill, the faster you go. The longer you feel that push from gravity, the faster it makes you go. Finally, you also know that the steeper the hill, the faster you go.
The maximum steepness is a sheer vertical drop-free fall-when gravity gives the biggest push of all. You wouldn't want to try that on your bicycle!
In free fall, with every passing second, gravity accelerates the object (increases its velocity) by 9.8 meters (32 feet) per second. So after one second, the object would be falling at 9.8 m/s (32 ft/s). After two seconds, the object would be falling at 19.5 m/s (64 ft/s). After three seconds, the object would be falling at 29 m/s (96 ft/s), and so on.
Measuring the speed of objects in free fall is not easy, because they fall so quickly. There is another way to make measurements of objects in motion under constant acceleration: use an inclined plane. An inclined plane is simply a ramp. You're making a hill with a constant, known slope. With a more shallow slope, the acceleration due to gravity is small, and the object will move at a speed that is more easily measured.
This project will help you make some scientific measurements of the "push" from gravity, using a marble rolling down an inclined plane. You'll record the experiment with a video camera, and use frame-by-frame playback to analyze the motion over time.
Terms and Concepts
To do this project, you should do research that enables you to understand the following terms and concepts:
- velocity,
- acceleration,
- inclined plane,
- mass,
- gravity.
Questions
- What is the formula for velocity as a function of time when an object is subject to constant acceleration?
- What is the formula for distance traveled as a function of time when an object is subject to constant accleration?
Bibliography
- For background information on inclined planes, see these references:
- Wikipedia contributors, 2006. Inclined Plane, Wikipedia, The Free Encyclopedia. Retrieved September 25, 2006.
- Henderson, T., 2004. Inclined Planes, The Physics Classroom, Glenbrook South High School, Glenview, IL. Retrieved September 25, 2006.
- Duffy, A. Inclined Plane, Boston University, Interactive Physics Demonstrations. Retrieved September 25, 2006.
- If you want to make a fancier set-up to release a steel marble electrically, see the following reference:
U.C. Regents, 1996. Acceleration, U.C. Berkeley Physics Lecture Demonstrations. Retrieved September 25, 2006.
Materials and Equipment
To do this experiment you will need the following materials and equipment:
- inclined plane:
- You'll need a flat board, about 2 m long (make sure that you can fit the whole track in the field of view of your video camera).
- Cut a groove straight down the middle to guide the rolling marble, or glue a straight piece of wood along the length of the board to act as a guide.
- Mark a starting line across one end.
- Mark a distance scale on the edge of your inclined plane. Use alternating light and dark colors every 5 cm. For better accuracy at early time points, alternate every cm for the first 10 cm. Make sure that the distance scale is clearly visible in your video recording.
- You will also need some wood blocks (about 2.5 cm thickness) to raise up one end of the board.
- tape measure (for measuring height and length of inclined plane),
- marble,
- helper,
- video camera:
- You must be able to do frame-by-frame playback of the video recording.
- tripod,
- plastic wrap (e.g., Saran wrap) and marker for tracking position on screen when playing back recordings.
Experimental Procedure
In this experiment, the goal is to measure the distance the marble travels in equal time intervals as it rolls down an inclined plane.
- Set up your inclined plane on a single block, so that it has a low slope. If the slope is too high, the marble will roll too fast, and it will be too hard to make accurate measurements.
- Set up the video camera on the tripod so that the inclined plane nearly fills the viewfinder. Make sure that you can clearly see the distance scale on the side of the inclined plane. You will need this for making your distance measurements when you play back the video recording. If your camera has an on-screen timer, turn it on for help in timing your experiment during playback.
- Hold a marble in place at the starting line.
- Have your helper start recording with the video camera.
- Say "1, 2, 3, go" and release the marble as you say "go", being careful not to give it a push. Your "go" will mark the starting point when you play back the recording.
- Repeat this at least 5 times.
- Play back the recording, and find a frame before you have let go of the marble. Mark the starting position (use plastic wrap to protect the monitor screen).
- Advance the recording frame by frame until the frame where you let go of the marble. This will be time t = 0.
- Advance the recording by a single frame. (Most video cameras record 30 frames per second, so the elapsed time between each frame is 1/30 of a second.)
- If the marble has moved a discernible amount from the starting position, measure and record the new position. If not, advance by another frame. Keep track of each frame advance, because this is how you will keep track of time.
- Continue to measure the position as the marble rolls down the inclined plane. For each measurement, record the distance traveled (from the starting line) the elapsed time.
- Repeat the measurements, at the same time points, in each of the five recordings you made.
- Calculate the average and standard deviation for the distance the marble has traveled at each time point.
- Graph the average distance traveled (y-axis) vs. time, in terms of the number of video frames (x-axis).
- Graph the average distance traveled (y-axis) vs. time squared. Compare the two graphs.
Ask an Expert
Do you have specific questions about your science project? Our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.
Variations
- Does the mass of the marble affect its acceleration? Try the experiment with marbles of different masses. Or, even better, compare a steel marble (e.g., a pinball or a large ball bearing) with a glass marble of the same diameter. Use a gram balance to weigh each marble (you can always weigh them at the post office if you don't have a gram balance available at home or school). Is the acceleration the same or different for the marbles with different masses?
- For another method of measuring distance traveled and velocity of an object rolling down an inclined plane, see the Science Buddies project, Distance and Constant Acceleration.
- Use your measurements to calculate the approximate velocity of the marble at each selected time points as it rolls down the inclined plane. Measure the distance the marble has traveled from the starting line in two adjacent frames (fn and fn+1). Subtract the distance measured in frame fn from the distance measured in frame fn+1. Divide by the result by the time elapsed between two frames (1/30 of a second). Repeat this process for several different pairs of frames from the beginning, middle, and end of the recording. Make a graph of velocity (y-axis) vs. time (x-axis). Does this graph look more like the distance vs. time or the distance vs. time squared graph?
- What happens if you change the slope of the inclined plane?
- One reason a marble was chosen for this experiment was to minimize the frictional forces which counteract the acceleration of gravity. Try repeating the experiment with other rolling objects (e.g., a toy car with the same mass as the marble) or different surface treatments (e.g., smooth, waxed surface, vs. rough, sandpapered surface). Can you detect a decrease in acceleration due to increased friction?
- For more advanced students:
- If you have studied trigonometry, you should be able to derive a formula that describes the acceleration, a, of the marble as function of the angle, θ, of the inclined plane (see Henderson, 2004).
- If you have studied calculus, you should be able to explain both velocity and acceleration as the first and second derivatives, respectively, of distance traveled with respect to time. Conversely, you should be able to explain velocity and distance traveled at a given time as the first and second integrals, respectively, of acceleration with respect to time.
Careers
If you like this project, you might enjoy exploring these related careers:
Career Profile
Lights, camera, action! It takes more than actors to put an exciting motion picture movie together. It takes film and video editors and cutting-edge computer technology to make an exciting movie that people want to see. From the many thousands of minutes of film and video, the editor has to choose the best shots to tell a cohesive and compelling story. In addition to having an artistic bent, the film and video editor must relish working with complicated computer equipment. If you would like to…
Read more
Career Profile
Physicists have a big goal in mind—to understand the nature of the entire universe and everything in it! To reach that goal, they observe and measure natural events seen on Earth and in the universe, and then develop theories, using mathematics, to explain why those phenomena occur. Physicists take on the challenge of explaining events that happen on the grandest scale imaginable to those that happen at the level of the smallest atomic particles. Their theories are then applied to…
Read more
Career Profile
Ever wondered who makes sure the Jumbotron works at the super bowl? Or that the microphones work at a presidential inauguration? These are the tasks of an audio and video equipment technician. Audio and video equipment technicians work to set up and operate audio and video equipment, including microphones, sound speakers, video screens, projectors, video monitors, and recording equipment.
Read more
Related Links
Cite This Page
General citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.MLA Style
Science Buddies Staff.
"Distance and Speed of Rolling Objects Measured from Video Recordings." Science Buddies,
20 Nov. 2020,
https://www.sciencebuddies.org/science-fair-projects/project-ideas/Phys_p027/physics/distance-and-speed-of-rolling-objects-measured-from-video-recordings?class=AQWS7DTplQ0WwYCkLhoxhYNmBMW-jy_Gk982PG5JyVHfMMkVnDlTrghQ4g8ayxwlCJmmumKVpPe2UfFfYIDfnGHA.
Accessed 25 Apr. 2024.
APA Style
Science Buddies Staff.
(2020, November 20).
Distance and Speed of Rolling Objects Measured from Video Recordings.
Retrieved from
https://www.sciencebuddies.org/science-fair-projects/project-ideas/Phys_p027/physics/distance-and-speed-of-rolling-objects-measured-from-video-recordings?class=AQWS7DTplQ0WwYCkLhoxhYNmBMW-jy_Gk982PG5JyVHfMMkVnDlTrghQ4g8ayxwlCJmmumKVpPe2UfFfYIDfnGHA
Last edit date: 2020-11-20
Explore Our Science Videos
How to Build a Paper Speaker
Make an LED Night-Light
Popsicle Stick Catapult