Home Store Project Ideas Project Guide Ask An Expert Blog Careers Teachers Parents Students

Electricity & Electronics Project Ideas (18 results)

Stop for a minute and try to imagine your world without electrical power and electronic gadgets. No convenient appliances in the kitchen, no electric lights. No computers, MP3 players, television, or video games. Your life would be completely different, wouldn't it? Electricity and electronics are so central to modern life that, paradoxically, they're easy to overlook. Stop overlooking them now and try a hand at one of our projects to explore the science of how electricity works or build a cool electronics gadget.

Search Refinements
Go
Difficulty
 
Cost
Time
Material Availability
Science Fair Project Idea
Electricity powers many of the devices we use every day, from lights to video games and computers. Engineers have to use certain materials to make electrical devices work. In this experiment, you will find out which materials let electricity flow through them (conductors) and which ones prevent electricity from flowing through them (insulators). Read more
Elec_p018
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability For your convenience, a kit is available for this project from the . Estimated project time includes time for shipping the kit.
Cost Low ($20 - $50)
Safety Short circuits can get very hot and present a burn hazard. Never connect the positive and negative ends (red and black wires) of the battery pack directly to each other.
Science Fair Project Idea
What do you do with your old wooden pencils when they get too short to hold? Don't throw them away; you can use them to make circuits! This project will show you how to use pencils to make resistors, an important part of many electrical circuits, and test how they affect the brightness of a lightbulb in a simple circuit. Read more
Elec_p013
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability A kit for this project is available from the . Estimated project time includes time for shipping the kit.
Cost Low ($20 - $50)
Safety Short circuits can get very hot and present a burn hazard. Never connect the positive and negative ends (red and black wires) of the battery pack directly to each other. Adult supervision is required for cutting the pencils.
Science Fair Project Idea
Dimmer switches let us control the brightness of a light, anywhere from completely off to full brightness. This can be nice when you want to set the brightness "just right," as opposed to a regular light switch that only lets you turn a light on or off. It turns out that you can make a dimmer switch out of an everyday object—a pencil! Try this project to find out how a dimmer switch can control the brightness of a light. Read more
Elec_p056
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability For your convenience a kit for this project is available at the . Estimated project time includes time for shipping the kit.
Cost Low ($20 - $50)
Safety Short circuits can get very hot and present a burn hazard. Never connect the positive and negative ends (red and black wires) of the battery pack directly to each other. Adult supervision is required for whittling the pencil.
Science Fair Project Idea
You may be familiar with permanent magnets—the kind that hang on a refrigerator. But did you know that other magnets, called electromagnets, can be turned on and off? When turned on, electromagnets act just like permanent magnets, but if you turn them off, their magnetic properties disappear. Electromagnets are an important part of many electronic devices, like motors, loudspeakers, and hard drives. You can create an electromagnet with a simple coil of wire and a battery. In this project,… Read more
Elec_p035
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This project requires specialty items, available in the . Estimated project time includes shipping for the kit.
Cost Low ($20 - $50)
Safety The electromagnet can become hot during periods of extended use.
Science Fair Project Idea
When you think of a motor, you may immediately think of a car, but you actually encounter other motors in your home every day. That's right, if you put on clean clothes from the washing machine, ate food from the fridge, or used a fan, you used an electric motor. In this electronics science project, you will make a simple electric motor with two magnets that "talk" to each other. As they interact, they will alternate between "liking" each other (pulling together), and "disliking" each other… Read more
Elec_p051
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites You should be able to coil wire neatly (or find someone who can show you how) in order to make your electric motor work.
Material Availability A kit containing all the specialty items needed for this project is available from the .
Cost Low ($20 - $50)
Safety

Never try to use a wall socket as power source for your motor.

Neodymium magnets are very strong. Follow the safety guidelines in the Procedure for working with these magnets.

Science Fair Project Idea
Have you ever wondered how a radio can grab signals that are transmitted through the air and convert them into sound? In this science project, you will build your own AM radio receiver from scratch and use it to listen to AM radio broadcasts. With your crystal radio you will be able to experiment with the circuit and the antenna to get the best reception. Read more
Elec_p014
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites To do this science project, you must live in an area where you can receive at least one strong AM radio station. You can check for this with a car or portable radio.
Material Availability Specific circuit items are required. A Science Buddies kit is available for your convenience. See the Materials and Equipment list for details
Cost Average ($40 - $80)
Safety Never operate your crystal radio during a thunderstorm. When not in use, always disconnect your antenna from the radio circuit, and connect it directly to the ground rod. Be sure to wear safety goggles when installing the ground rod, especially if you are using a metal hammer. An adult's help might be necessary for some steps in the Procedure.
Science Fair Project Idea
Did you ever have a favorite toy like an action figure or doll that could light up, make noise, or move? This project will show you how to make your own interactive toy using the Science Buddies . Check out the video to see what this simple, but fun, project looks like. The version you make does not have to be a robot; it can be any shape and have any sound effects you want. This project uses a tiny computer called a Raspberry Pi and is fun and easy for even complete… Read more
CompSci_p058
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Estimated project time includes shipping for the kit. The project itself will take one or two days.
Cost Very High (over $150)
Science Fair Project Idea
Water is a valuable resource, and water shortages are a serious problem in many parts of the world. The problem can be made worse by people who waste water; for example, by watering a garden or using sprinklers on their lawn (or a farmer taking care of an entire field) when it has rained recently or the soil is already moist. How can you help conserve water and prevent such waste? One way is to build an electronic soil moisture sensor. This project will show you how to build a circuit that… Read more
Elec_p066
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites Familiarity with using a solderless breadboard, or willingness to learn.
Material Availability Specialty electronics items are required. A kit is available from the . Time required includes shipping for the kit.
Cost Average ($50 - $100)
Safety Short circuits can get very hot. Double-check all of your wiring before you connect the 9 V battery.
Science Fair Project Idea
A nice hot cup of tea sure can wake and warm you up in the morning. In this project, you will investigate the chemistry of tea. The longer you steep a tea bag in hot water, the stronger the tea will be. But how does the strength of the tea change with longer brewing time? In this project you will make a very simple electronic device to measure the strength of tea. The device will determine how strong the tea is by measuring the amount of light the tea absorbs. Read more
FoodSci_p058
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty electronics items are required. A kit is available from the . Time required includes shipping for the kit.
Cost Average ($50 - $100)
Safety Adult supervision is required when boiling water.
Science Fair Project Idea
You have probably read all about forms of alternative energy like solar and wind power. But what about human power? With the aid of a coil of wire and some magnets, you can generate electricity with nothing more than a flick of your wrist. In this project, you will build a small hand-powered electrical generator that can power a series of tiny lights. Get ready to save the planet and get some exercise at the same time! Read more
Energy_p009
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability This science project requires some specialty electronic components. A kit is available from the . The Time Required estimate includes time for gathering specialty materials. The actual project only takes 1 day.
Cost Average ($40 - $80)
Safety

Neodymium magnets are very strong and can pinch your fingers when they come together. You should keep them away from pets and small children because they can cause serious harm if ingested. As with any magnet, you should keep them away from computers, cell phones, and credit cards.

Adult supervision is required when using a hobby knife.

1 2 >