Jump to main content

Blowing the Best Bubbles

1
2
3
4
5
20 reviews
Log In

This feature requires that you be logged in as a Google Classroom teacher and that you have an active class in Google Classroom.

If you are a Google Classroom teacher, please log in now.

For additional information about using Science Buddies with Google Classroom, see our FAQ.

Summary

Active Time
20-30 minutes
Total Project Time
20-30 minutes
Key Concepts
chemistry, bubbles, surface tension, evaporation
Credits
Teisha Rowland, PhD, Science Buddies
A small child creates bubbles using a bubble wand

Introduction

If you have ever tried to make bubbles using plain water, you may have seen that it does not work. This is because the surface tension of water is too high. When detergent is added to water, it lowers the surface tension so that bubbles can form. Other things can be added to this mixture, such as corn syrup or glycerin, to make a solution that is even better for creating bubbles. In this science activity, you will find out which solution creates the best bubbles!
This activity is not recommended for use as a science fair project. Good science fair projects have a stronger focus on controlling variables, taking accurate measurements, and analyzing data. To find a science fair project that is just right for you, browse our library of over 1,200 Science Fair Project Ideas or use the Topic Selection Wizard to get a personalized project recommendation.

Materials

  • Permanent marker
  • Masking tape
  • Pipe cleaners (3)
  • Timer
  • Large cups or jars with a wide opening (3)
  • Measuring cups
  • Tablespoon measurers
  • Liquid dishwashing soap, e.g. Dawn or Joy
  • Distilled water. This is available at grocery stores.
  • Glycerin (small bottle). This is available at a drugstore or pharmacy.
  • Light corn syrup

Instructions

  1. Make a pipe cleaner wand by pinching a pipe cleaner in the middle and bending half of it into a circle, twisting a little bit of the end to secure it. Make two more pipe cleaner wands this way, making sure their diameters are all the same.
  2. Take three cups and label them "Detergent Only," "Glycerin," and "Corn Syrup" using the permanent marker and masking tape.
  3. To all three cups add 1 cup of water and 2 tablespoons (Tbsp.) of detergent. To the "Detergent Only" cup add an extra 1 tbsp. of water.
  4. Mix the detergent in each cup. You should see small bubbles forming as you mix in the detergent.
    Think about:
    Why do you think you need detergent in every solution?
  5. To the "Glycerin" cup add 1 tbsp. of glycerin and to the "Corn Syrup" cup add 1 tbsp. of corn syrup. Mix the "Glycerin" and "Corn Syrup" cups.
    Think about:
    What is the consistency of the glycerin and corn syrup? Does one seem more viscous (thick and sticky) than the other, or do they have about the same viscosity?
  6. Go outside and blow a bubble from one of the solutions. Try to catch the bubble on your wand and time how long the bubble lasts before it pops. This can be difficult to do, so you may need to practice this first. Also, it may be helpful to have another person time you.

  7. Catch and time at least four bubbles from each solution.
    Think about:
    Which solution makes bubbles that last the longest? Which solution makes the shortest lived bubbles? Why do you think this is?

What Happened?

Detergent lowers the surface tension of water enough so that bubbles can form. The solution with only water and detergent probably made smaller, shorter-lived bubbles overall compared to the solutions with glycerin or corn syrup. When the water in a bubble evaporates, the bubble pops. Glycerin and corn syrup form bonds with the water and this makes the bubbles take longer to evaporate, which improves the lifespan and durability of the bubble. Glycerin makes stronger, longer-lasting bubbles, but corn syrup is often substituted in bubble solutions because it is less expensive.

Digging Deeper

In a container of water, the tiny water molecules are attracted to each other, and consequently they are always pulling on each other. At the surface of the water these water molecules are attracted to the water molecules around and below them, but have no water molecules above them to be attracted to (since it is just air). This is what creates surface tension. The water molecules at the surface of the water do not want to move up, away from other water molecules, which makes water have a high surface tension. In fact, it is too high to form bubbles.

When detergent is added to water, it lowers the surface tension so that bubbles can form. The detergent molecules increase the distance between water molecules and reduce the water molecules' ability to interact with other water molecules. This reduces the pull that the water molecules exert on each other and lowers the surface tension of the solution. A bubble formed from a solution with water and detergent is a spherical layer of water molecules that is surrounded on either side by a layer of detergent molecules. Parts of the detergent molecules are attracted to water (they are hydrophilic) and other parts do not want to be near water (they are hydrophobic). Consequently, the detergent molecules in the bubble become oriented so that their hydrophilic parts touch the water and their hydrophobic parts face outward, touching the air.

icon scientific method

Ask an Expert

Curious about the science? Post your question for our scientists.

For Further Exploration

  • How does the concentration of glycerin or corn syrup in the bubble solution change how long the bubbles last? You can try this activity again but using different concentrations of glycerin or corn syrup in the solutions. How little is too little, and how much is too much to add? Can you make a bubble solution that results in bubbles that last longer than the ones in the original activity?
  • Do bubbles always make a spherical shape? Try twisting pipe cleaners into different shapes, such as stars, squares, or triangles. What shape are the bubbles made from these differently shaped pipe cleaner wands?

Project Ideas

Science Fair Project Idea
Making your own bubble solution is fun, but sometimes the bubbles don't seem to work as well as the solutions you buy in the store. In this experiment you can test if adding corn syrup or glycerin to your bubble solution will make it just as good as the stuff you can buy. This experiment will have you blowing bubbles! Read more

Careers

Career Profile
Chemical engineers solve the problems that affect our everyday lives by applying the principles of chemistry. If you enjoy working in a chemistry laboratory and are interested in developing useful products for people, then a career as a chemical engineer might be in your future. Read more
Career Profile
What makes it possible to create high-technology objects like computers and sports gear? It's the materials inside those products. Materials scientists and engineers develop materials, like metals, ceramics, polymers, and composites, that other engineers need for their designs. Materials scientists and engineers think atomically (meaning they understand things at the nanoscale level), but they design microscopically (at the level of a microscope), and their materials are used macroscopically… Read more
Career Profile
Everything in the environment, whether naturally occurring or of human design, is composed of chemicals. Chemists search for and use new knowledge about chemicals to develop new processes or products. Read more
Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.