Jump to main content

Find Out Why the Ocean is in Motion!

Log In

This feature requires that you be logged in as a Google Classroom teacher and that you have an active class in Google Classroom.

If you are a Google Classroom teacher, please log in now.

For additional information about using Science Buddies with Google Classroom, see our FAQ.

Summary

Key Concepts
Convection, temperature, density
Credits
Svenja Lohner, PhD, Science Buddies

Introduction

You probably know that water never stays still. But did you know that there is something called the global “ocean conveyor belt” that moves massive amounts of water from one ocean to another? These water currents are essential for mixing and transporting nutrients and oxygen, and play a critical role in our climate. This is because they move warm and cold water over very long distances, which affects the temperature of the landmasses that border the ocean. The Gulf Stream, for example, is one warm current from the Gulf of Mexico that moves into the North Atlantic Ocean and makes the climate in Europe much warmer. Do you want to know what causes the “ocean conveyer belt”? It is pretty simple: Differences in water density! Try this activity to learn more!

This activity is not recommended for use as a science fair project. Good science fair projects have a stronger focus on controlling variables, taking accurate measurements, and analyzing data. To find a science fair project that is just right for you, browse our library of over 1,200 Science Fair Project Ideas or use the Topic Selection Wizard to get a personalized project recommendation.

Background

There is a lot of water movement in the ocean. The most obvious examples are the waves and ripples on the water’s surface that are generated by wind, or ocean currents due to tides. It turns out, however, that water can also be moved without wind or tides, which is what happens in the deep ocean. There, currents are set in motion by variations in water density caused by differences in temperature and salinity, a process called convection.

The density of a substance is defined by its mass per volume; one liter of water, for example, does not weigh the same as one liter of oil. The lighter liquid will float on top, while the heavier liquid will sink to the bottom. The density of water varies with temperature. When water is heated, it will expand and therefore increase in volume. This means that its mass per volume will decrease and it becomes less dense. Thus, warm water is generally less dense than cold water. Another factor that affects water density is salinity, which is the amount of salt in ocean water. More salt makes water heavier, and therefore denser.

These two factors, temperature and salinity, are the main driving forces behind the global ocean conveyor belt, which is a huge water circulation system in the deep ocean that moves water around the globe. Currents begin near the pole in the North Atlantic where the surface of the ocean gets cooled by the arctic temperatures. As sea ice forms, salt stays behind and the water becomes saltier. This water is now denser, and will sink to the bottom of the ocean floor. This creates a current, as surface water has to move in to replace the sinking water. The cold water moves all the way to Antarctica, and then to the Indian and Pacific Oceans. Once the water reaches warmer regions, it warms up, becomes less dense, and rises to the surface. Eventually, it finds its way back to the North Atlantic where the whole cycle begins again. In this activity, you will demonstrate how temperature affects water movement and water density, and create your own little ocean currents in a glass!

Materials

  • Transparent cups, exactly the same size (2)
  • An old CD
  • Sandwich bag
  • Scissors
  • Food coloring (any color)
  • Tap water
  • Microwave
  • Ice cubes
  • Thermometer
  • Paper towels for water spills
  • Adult helper
  • Tray
  • Optional: Table salt

Preparation

  1. Use the scissors to cut a long strip off the sandwich bag, wide enough to fully cover the hole in the middle of the CD.
  2. Place the tray on a work area that can tolerate water spills.
  3. Fill both cups with tap water.
  4. Add ice cubes to one of the cups to cool down the water. Once it is cold, remove the ice cubes and fill the cup all the way to the top with more tap water.
  5. Put the other cup into the microwave for about one minute. Make sure it is filled all the way to the top with water.
  6. Add a couple of drops of food coloring to the hot water.
  7. Set the cup with hot water into the tray.
  8. With the thermometer, measure the temperature of both the hot and cold water.

Instructions

  1. Place the cut plastic strip from the sandwich bag onto the CD so that the hole is completely blocked, and part of the plastic strip extends beyond the CD.
  2. Put the CD on top of the cold cup with the plastic strip facing towards the cold water.
  3. Then, pick up the cup with cold water and the CD on top, and slowly turn it upside-down, pressing on the CD to avoid any spillage. You might need an adult to help you with that.
  4. Place the upside-down cup with cold water on top of the cup with hot water so that the CD is separating both cups. Once you have placed both cups together, what happens? Do you see any water mixing yet?
  5. Next, slowly pull on the part of the plastic strip that extends beyond the CD and remove the whole strip to expose the hole of the CD. What happens when the hole is open? Do you see any water movement? If yes, in which direction does the water move? Can you describe your observations?
  6. Observe both cups for about 10 minutes. Do you see any changes happening in the top or bottom cup? If yes, how does the water change?
  7. After 10 minutes, carefully separate both cups again by lifting the CD and the upper cup and inverting both again. You might want to ask an adult to help you with that.
  8. Finally, measure the temperature again in both cups. Has the temperature changed? If yes, how?
  9. Dispose of the water in both cups in the sink and set the same experiment up again, but this time, place the cup with hot water on top of the cup with cold water. What happens if you remove the plastic strip this time? Do you see the same results? Does any water movement happen? Why or why not?
  10. After 10 minutes, separate both cups again and measure the temperature in each cup. Has the temperature changed? If yes, how much?

Extra: In this experiment, you have shown that differences in temperature drive water movement. What happens if you have no temperature gradient? Repeat the same experiment, but this time do not heat or cool the water in the cups—keep them at the same temperature. Do you see any water movement happening when you remove the plastic strip? Why or why not?

Extra: Can you find a way to demonstrate how salinity affects water density and water movement? Add salt to one of the cups to create a salinity gradient and repeat the experiment. Does the salty water float or sink? Can you create water movement with a salt gradient?

Extra: Instead of demonstrating that warm water floats on top of cold water, show how cold water sinks to the bottom and add the food coloring to the cold water instead of the warm water. Then place the cold water on top of the warm water and vice-versa. Do you see water movement in both directions, or only in one?

Extra: How does the temperature gradient affect the water mixing? Add a third experiment, in which the temperature difference between the warm and cold water is different from your previous experiment. What changes if you have a higher versus a lower temperature difference between the hot and cold water?

Observations and Results

Were you able to make your water move to float and sink? When you add the food coloring to the hot water and place the cold water on top of the hot water, initially nothing should have happened as the plastic strip should have still covered the hole of the CD, preventing the water from mixing between the cups. However, as soon as you remove the plastic strips, the dyed warm water will shoot through the CD hole and mix with the cold water above.

This water movement is driven by convection: the movement of water due to differences in temperature. As the warm water is lighter than cold water and wants to expand, it moves into the upper cup through the hole. After about 10 minutes, the mixing should almost be completed, and the color of the water should be similar in both cups. At the same time, the temperature in both cups should have changed significantly. In the beginning, you should have measured a large temperature difference, but at the end, both temperatures should have been similar. As the water was mixing, heat exchange occurred, which means that the warm water was heating up the cold water. If you tried the extra activity with a higher or lower temperature difference between both cups, you should have noticed that the mixing of water happens faster when the temperature difference is larger. When you have no temperature gradient at all, no significant mixing will happen within 10 minutes.

If you reverse the experiment and have the warm water on top of the cold water, you should have seen that the water did not mix between the cups. This is because warm water is lighter, or less dense, than the cold water, which is why it wants to remain on top of the cold water. The same is true for salty versus non-salty water. Salty water will always sink to the bottom, as it is denser than non-salty water—exactly how it does in the real ocean!

icon scientific method

Ask an Expert

Curious about the science? Post your question for our scientists.

Cleanup

  • Dispose of all the water in the sink and clean any water spills with paper towels.

Additional Resources

Careers

Career Profile
How is climate change affecting Earth? What will the changes mean for society? If these are questions that peak your curiosity, then you might be interested in a job as a climate change analyst. Climate change analysts evaluate climate data and research to determine how shifts in the climate will affect natural resources, animals, and civilizations. They use this information to make suggestions about what individuals and governments can do to ensure a higher-quality life for everyone in the… Read more
Career Profile
Just as a doctor uses tools and techniques, like X-rays and stethoscopes, to look inside the human body, geoscientists explore deep inside a much bigger patient—planet Earth. Geoscientists seek to better understand our planet, and to discover natural resources, like water, minerals, and petroleum oil, which are used in everything from shoes, fabrics, roads, roofs, and lotions to fertilizers, food packaging, ink, and CD's. The work of geoscientists affects everyone and everything. Read more
Career Profile
Hydrologists examine the physical characteristics, distribution, and circulation of water above and below the earth's surface. They study rainfall and other precipitation, the paths precipitation takes through the soil and rocks underground, and its return to the oceans and air. Often, they specialize in either underground water or surface water. They examine the form and intensity of precipitation, its rate of infiltration into the soil, its movement through the Earth, and its return to the… Read more
Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.