Jump to main content

Build a Paper Roller Coaster

1
2
3
4
5
889 reviews
Log In

This feature requires that you be logged in as a Google Classroom teacher and that you have an active class in Google Classroom.

If you are a Google Classroom teacher, please log in now.

For additional information about using Science Buddies with Google Classroom, see our FAQ.

Summary

Active Time
45 minutes to 1 hour
Total Project Time
45 minutes to 1 hour
Key Concepts
Potential energy, kinetic energy, friction, conservation of energy
Credits
Ben Finio, PhD, Science Buddies

Introduction

Have you ever ridden a roller coaster? Have you ever wanted to design your own? There are plenty of expensive toys and even video games that will let you build your own coasters—but in this project you'll make one out of paper and tape, and learn about roller coaster physics along the way!

This activity is not recommended for use as a science fair project. Good science fair projects have a stronger focus on controlling variables, taking accurate measurements, and analyzing data. To find a science fair project that is just right for you, browse our library of over 1,200 Science Fair Project Ideas or use the Topic Selection Wizard to get a personalized project recommendation.

Materials

  • A cardboard base (optional)
  • Scissors
  • Marbles
  • Tape
  • Video instructions are available in English and Spanish
  • Roller coaster template sheets, you will need to download and print these on cardstock
  • If you do not have a printer, or prefer the convenience, a Paper Roller Coaster Kit is available from our partners at Home Science Tools. The convenient kit has:
    • Roller coaster templates pre-printed on colorful sheets of cardstock (8)
    • Tape
    • Corrugated cardboard (2)
    • Marbles (2)
    • A Classroom Paper Roller Coaster Kit is also available with five times the supplies.

Disclaimer: Science Buddies participates in affiliate programs with Home Science Tools, Amazon.com, Carolina Biological, and Jameco Electronics. Proceeds from the affiliate programs help support Science Buddies, a 501(c)(3) public charity, and keep our resources free for everyone. Our top priority is student learning. If you have any comments (positive or negative) related to purchases you've made for science projects from recommendations on our site, please let us know. Write to us at scibuddy@sciencebuddies.org.

Prep Work

  1. Before you try building an entire roller coaster, practice building the individual track segments. If you are not using the kit, you will need to print the template (in English or Spanish) and cut out the pieces, or follow the instructions to draw your own with a pencil and ruler.
  2. To build a straight segment:
    1. Cut a 7.5 cm (3 inch) wide strip of paper.
    2. Draw two parallel lines that divide it into three 2.5 cm-wide strips.
    3. Fold the two sides up 90 degrees along those lines to form walls.

  3. To build a loop or a hill:
    1. Cut a 7.5 cm (3 inch) wide strip of paper.
    2. Draw two parallel lines that divide it into three 2.5 cm-wide strips.
    3. Make marks every 2.5 cm along the long edges of the paper.
    4. Cut inward 2.5 cm from these marks to form tabs.
    5. Fold the tabs up 90 degrees.
    6. Bend the track into the shape you want, and tape the tabs together to hold it in place. This step is easier with two people, one to hold the track in place and one to do the taping.

  4. To build a curve:
    1. Cut a 7.5 cm (3 inch) wide strip of paper.
    2. Draw two parallel lines that divide it into three 2.5 cm-wide strips.
    3. Make marks every 2.5 cm along one long edge of the paper.
    4. Cut inward 5 cm (2 inches) from these marks.
    5. Fold up the uncut side of the paper 90 degrees to form a wall.
    6. Fold up the tabs on the other side to form the other wall.
    7. Since the bottom portion of the track is cut into segments, you can bend it horizontally to form a curve. Tape the tabs together to hold the curve in place.

  5. To build a support strut:
    1. Cut a 6.25 cm (2.5 inch) wide strip of paper.
    2. Draw four parallel lines that divide it into five 1.25 cm (0.5 inch) wide strips.
    3. Cut inward 2.5 cm along these lines from one edge.
    4. Fold along the lines to form a square shape (so two of the segments overlap), and use tape to hold in place.
    5. Fold the tabs you cut at the end outward. This will allow you to tape the tabs flat to a piece of cardboard, so your strut can stand upright.

Instructions

  1. Before you start building, plan out a design for your roller coaster. Draw your design on paper. Figure out how many supports and pieces of track you will need. Make sure your marble starts at the top of a hill. Note that the printable template also contains optional funnel pieces (not pictured).
  2. Using a piece of corrugated cardboard as a base, assemble your track according to your plan. Tape the track segments together end-to-end to connect them.
  3. Place the marble at the top of your track and let it go. Watch carefully.
    Think about:
    What happens? Does it make it the whole way through the track?
  4. If the marble made it the whole way to the end, try making your track longer by adding more pieces.
    Think about:
    How long can you make your track before the marble comes to a stop?
  5. If your marble didn't make it to the end, try to figure out why. Is there a spot in your track where the marble got stuck? Was the marble going too slow to make it through a loop? If necessary, make changes to your design, like making the curves more gradual or the starting hill taller, and try again.

What Happened?

If you made your starting hill tall enough, and all the curves and loops of your roller coaster were gradual, your marble should have been able to get all the way to the end. However, if your coaster had any sharp turns or corners, your marble might have gotten stuck. If you tried to have your marble go up a hill or through a loop that was taller than the hill it started on, it wouldn't make it all the way through. Why not? It is all about energy! Read the Digging Deeper section to learn more about the physics behind roller coasters.

Digging Deeper

Roller coasters are all about physics! Unlike other vehicles like cars and trains, roller coasters do not have an engine that propels them along the track. Instead, they rely on gravitational potential energy*, which they gain by initially being towed up a large hill. Potential energy is "stored" because of an object's elevation, or height off the ground. When the coaster starts going down the hill, the potential energy is converted to kinetic energy, or the energy of the motion. When the coaster goes back up another hill, it will lose kinetic energy (it will slow down) and gain some potential energy again. Some of the energy is also converted to heat due to air resistance and friction with the track, gradually causing the coaster to slow down. This process continues as the coaster goes through loops, hills, and turns, until eventually it comes back to the beginning.

Due to conservation of energy (the total amount of energy in the system must be conserved, or stay the same), the total amount of kinetic energy and energy lost due to friction can never be greater than the initial amount of potential energy that the coaster has. That means coaster designers have to make sure the coaster has enough initial potential energy to make it through the rest of the track. This places some limits on the design. For example, the coaster cannot go through a loop or over a hill that is taller than the starting hill, because going higher would require more energy than it has available. If the track is too long, friction might eventually cause the coaster to come to a complete stop.

To build a successful paper coaster, you had to take these factors into consideration. Since some energy is always lost to friction, your starting hill has to be taller than any other hills or loops in your coaster. If you had any long, flat segments, the marble might have rolled to a stop because of friction. You have to make sure your marble has enough potential energy to make it through your whole track. So if you had trouble, go back and try making your starting hill taller.

*Note that there are other kinds of potential energy, like elastic potential energy (the energy you get when you stretch a rubber band). In this project, we are only talking about gravitational potential energy.

icon scientific method

Ask an Expert

Curious about the science? Post your question for our scientists.

For Further Exploration

  • Instead of using paper, you can make roller coasters from foam pipe insulation, available at a hardware store. This will allow you to make a much bigger coaster more quickly since it doesn't involve as much cutting, folding, and taping. See the Additional Resources section for examples.

Project Ideas

Science Fair Project Idea
This is a really fun project even if you don't like going on roller coasters yourself. You'll build a roller coaster track for marbles using foam pipe insulation and masking tape, and see how much of an initial drop is required to get the marble to "loop the loop." It's a great way to learn about how stored energy (potential energy) is converted into the energy of motion (kinetic energy). Read more
Science Fair Project Idea
If you'd like to investigate the physics of amusement park rides, then this project is for you. You'll build a roller coaster track for marbles using foam pipe insulation and masking tape, and see how much the marble's potential energy at the beginning of the track is converted to kinetic energy at various points along the track. Read more

Careers

Career Profile
Mechanical engineers are part of your everyday life, designing the spoon you used to eat your breakfast, your breakfast's packaging, the flip-top cap on your toothpaste tube, the zipper on your jacket, the car, bike, or bus you took to school, the chair you sat in, the door handle you grasped and the hinges it opened on, and the ballpoint pen you used to take your test. Virtually every object that you see around you has passed through the hands of a mechanical engineer. Consequently, their… Read more
Career Profile
You use mechanical devices every day—to zip and snap your clothing, open doors, refrigerate and cook your food, get clean water, heat your home, play music, surf the Internet, travel around, and even to brush your teeth. Virtually every object that you see around has been mechanically engineered or designed at some point, requiring the skills of mechanical engineering technicians to create drawings of the product, or to build and test models of the product to find the best design. Read more
Career Profile
Physicists have a big goal in mind—to understand the nature of the entire universe and everything in it! To reach that goal, they observe and measure natural events seen on Earth and in the universe, and then develop theories, using mathematics, to explain why those phenomena occur. Physicists take on the challenge of explaining events that happen on the grandest scale imaginable to those that happen at the level of the smallest atomic particles. Their theories are then applied to… Read more
Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.