Jump to main content

Half-Life with Coins

Log In

This feature requires that you be logged in as a Google Classroom teacher and that you have an active class in Google Classroom.

If you are a Google Classroom teacher, please log in now.

For additional information about using Science Buddies with Google Classroom, see our FAQ.

Summary

Key Concepts
Exponential decay, radioactivity, contamination
Credits
Ben Finio, PhD, Science Buddies
Stacks of different coins

Introduction

You may have read about nuclear disasters at sites like Chernobyl, Three Mile Island and Fukushima in the news or in a history lesson. Disasters like these can take years or even decades to clean up, and make it unsafe for humans to live nearby for even longer. Why does the contamination last so long? In this (perfectly safe!) activity, you will learn about radioactive decay using coins.

This activity is not recommended for use as a science fair project. Good science fair projects have a stronger focus on controlling variables, taking accurate measurements, and analyzing data. To find a science fair project that is just right for you, browse our library of over 1,200 Science Fair Project Ideas or use the Topic Selection Wizard to get a personalized project recommendation.

Background

You probably know that all matter is made of atoms. Certain types of atoms are "radioactive," meaning that they will eventually decay, or "break down" into a different type of atom. When this breakdown process occurs, the atom emits radiation. While some types of radiation surround us every day and are perfectly safe, like radio waves and visible light; other types like x-rays and gamma rays can be dangerous to humans. The types of atoms used as fuel in nuclear reactors can produce such dangerous radiation, which is why it is very important to keep the fuels safely contained. It is dangerous when there is an explosion or other disaster like an earthquake at a nuclear plant, and some of the radioactive atoms escape into the surrounding air, water, or soil, causing contamination.

The decay of radioactive materials is a random process, kind of like flipping a coin or rolling a die. At any given moment in time, there is a chance that an atom will decay, but there is also a chance that it will remain the same. The rate at which radioactive materials decay is measured with something called the "half-life." The half-life describes how long, on average, it takes until one-half of the original radioactive atoms are left. The half-lives of different atoms can vary widely – some are less than a second, and others are thousands or even millions of years. In this activity, you will simulate radioactive decay by flipping coins. Coins that land tails-up "decay" and coins that land heads-up remain the same. This will allow you to see how the process of radioactive decay works – without using any radioactive materials!

Materials

  • about 120 coins
  • resealable plastic bag
  • paper or notepad
  • pencil

Instructions

  1. Put exactly 100 coins in the resealable bag.
  2. Shake the bag vigorously for a few seconds.
  3. Open the bag and carefully dump the coins out on a tabletop. Be careful not to dump them out too quickly, or they might roll onto the floor.
  4. Separate the coins into two piles – heads and tails. About how many coins landed heads up, and how many landed tails up? What is the ratio between the two?
  5. Count the number of heads. Write this number down.
  6. Put the coins that landed tails up aside. Put the coins that landed heads up back in the bag.
  7. Shake the bag again and repeat the process. Dump the coins out, separate the coins into heads and tails, count the number of heads, write the number down, and put the heads back in the bag. About what ratio of heads/tails do you get each time?
  8. Keep repeating this process until there are no more heads to put back in the bag, and you have set aside all 100 coins.
  9. Now, look at the numbers you wrote down. Make a stack of coins the same height as each number, and line the stacks up next to each other in order (this way you are making a "graph" using stacks of coins, instead of drawing one on paper). Note that you may need to use some of your extra coins to make the stacks (for example, say you wrote down the numbers 56, 25, 13, 6, 3, and 1. That adds up to 104 coins, so even though you only used 100 coins for the experiment, you need 104 to make the graph). What does your "graph" look like? Does it form a straight line, or does it have a different shape? How many turns did it take you until there were no coins left?

Extra: repeat the experiment a few more times. Do you get exactly the same results each time?

Extra: repeat the experiment with different numbers of coins. What happens if you start out with 200 coins, or only 50 coins? Does the resulting graph have the same shape, or is it different?

Extra: use a stopwatch to time how long you shake the bag to simulate materials with different half-lives, then use a ruler to space out your stacks of coins to represent time when you make your graph. For example, if you shake the bag for 10 seconds, you could place the stacks of coins 10 centimeters apart. How does this graph compare to one where you shake the bag for 20 seconds, if in both cases you start out with 100 coins? What does this mean about materials with a longer half-life?

Observations and Results

You should have seen that the number of coins in the bag decreases by roughly, but not exactly, half each time you count heads and tails. For example, even if you always start out with 100 coins, that does not mean you will have exactly 50 heads and 50 tails the first time you shake the bag. You might get 56 heads and 44 or tails, or 49 heads and 51 tails. You will lose about half the coins each time, and it will probably take you about 6 turns until there are no coins left when you start out with 100 (remember that flipping a coin is a random process – so your results will not be exactly the same each time). The resulting graph does not form a straight line. Instead, it forms an exponential curve that starts off very steep, but then gradually tapers off towards zero. If you start out with more or fewer coins, the number of turns it takes you to reach zero coins will change, but the shape of the curve will remain the same.

This is why radioactive contamination is dangerous in the environment and hard to get rid of. Even though large amounts of the material may decay very quickly at first, smaller amounts can linger for a very long time. For example, some of the contaminants in the Chernobyl disaster have half-lives of about 30 years. Imagine that you could re-do this experiment and wait 30 years until you repeated each turn. There would probably still be some coins left after more than 100 years! That is why, even though the Chernobyl disaster occurred in 1986, the area is still unsafe for humans to inhabit.

icon scientific method

Ask an Expert

Curious about the science? Post your question for our scientists.

Additional Resources

Careers

Career Profile
Nuclear engineers harness the power of the atom to help solve large and difficult problems facing humanity. They design power plants that create energy to power homes and businesses without producing greenhouse gases. They develop machines that image the human body and destroy cancer cells, sterilize food and medical equipment, and create new pest or drought-resistant seeds. They work to make the world a better place. Read more
Career Profile
Nuclear technology is used to image the human body, destroy cancer cells, sterilize food and medical equipment, create pest or drought-resistant seeds, and to generate power for 1 in 5 U.S. homes and businesses. Nuclear monitoring technicians help to keep the people who work with nuclear technology and the environment safe from excessive radiation exposure. They use special instruments to measure and monitor the radiation levels of workers, work areas and equipment, and they are involved in… Read more
Career Profile
One in five United States homes and businesses is powered by nuclear power, and nuclear power reactor operators are the people who ensure that those reactors are operating safely and efficiently at all times. They monitor all equipment continuously, and implement procedures if malfunctions are observed. They also control and adjust the amount of power being generated, and the reactor coolant temperature as power demands change through the day and during weather events, like heat waves. Read more
Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.