Log In
Summary
Active Time
10-20 minutes
Total Project Time
10-20 minutes
Key Concepts
Forces, engineering design
Credits
Ben Finio, PhD, Science Buddies
Introduction
Is that a sailboat or a sail...car? Design and build a toy car powered by the wind in this fun engineering project!
This activity is not recommended for use as a science fair project. Good science fair projects have a stronger focus on controlling variables, taking accurate measurements, and analyzing data. To find a science fair project that is just right for you, browse our library of over 1,200 Science Fair Project Ideas or use the Topic Selection Wizard to get a personalized project recommendation.
Materials
- Corrugated cardboard
- Construction paper or cardstock
- Wooden skewers (3)
- Plastic straws (2)
- Plastic bottle caps (4)
- Tape
- Scissors
- Hobby knife
- Fan
Image Credit: Ben Finio, Science Buddies / Science Buddies
Prep Work
Note: adult supervision is recommended when using a hobby knife.
Instructions
- Cut out a piece of cardboard to form the body of your car.
- Tape two straws to the bottom of your car, one at each end to form the axles. Make sure the straws are parallel.
- Use the hobby knife to carefully poke a "+"-shaped hole in the center of each bottle cap.
- Push a wooden skewer through the hole in one of the bottle caps.
- Thread the other end of the skewer through one of the straws.
- Push a bottle cap onto the end of the skewer opposite the first bottle cap. You just made an axle with two wheels!
- Repeat steps 4 through 6 to make the other axle.
- Make sure the axles can spin and the car can roll smoothly without getting stuck. If needed, adjust the wheels so they are not too wobbly.
- Use the hobby knife to poke a small hole in the middle of the cardboard.
- Insert a wooden skewer upright into the hole to form a mast. Secure it at the base with plenty of tape. If it is still too wobbly, you can build a diagonal support out of a piece of cardboard.
- Cut out a shape for a sail from a piece of paper.
- Poke the upright skewer through both ends of the sail to hold it in place.
- Place your car in front of a fan, turn on the fan, and watch it go!
- Experiment with your car. Can you change the design to make it faster?
Image Credit: Ben Finio, Science Buddies / Science Buddies
What Happened?
When you turn on the fan, the moving air pushes on the car's sail. This causes the car to move forward. In order for the car to roll smoothly, the axles need to be parallel (aligned with each other) and the wheels need to be centered on the axles. If the axles are crooked or the wheels are off-center, they may get stuck as they spin.
Digging Deeper
This is a good project to demonstrate physics concepts like mass, forces, and friction. For example, what happens if you make the sail a different size or change its shape? A bigger sail will catch more moving air, which exerts a bigger push (force) on the car. You might think that means a bigger sail will always make the car go faster. However, a bigger sail is also heavier, and can be more difficult to support without the mast falling down. A sail that is too tall could even make the entire car so top-heavy that it tips over! You can also experiment with different materials for your wheels and axles. Are some easier to build? Do some spin more smoothly than others? There is no "right" answer and you will need to experiment to find out!
Image Credit: Science Buddies
Ask an Expert
Curious about the science? Post your question for our scientists.
For Further Exploration
- Put your fan on the floor in a hallway or a large room. Measure how far your car goes before it stops with different size and/or shape sails.
- If you have a stopwatch, measure how fast your car can go over a certain distance with different size and/or shape sails.
Related Resources
Project Ideas
Do you think you could build a car powered by nothing but air? A balloon-powered car is pushed forward by air escaping from a balloon, and it is fun and easy to build with materials you already have around your house. Can you imagine how you would want your own balloon-powered car to look? Can you design a car that will travel as far as possible? You can even measure your car's speed using your smartphone and a special sensor app. Get ready to grab some simple supplies to bring your idea to…
Read more
Careers
Career Profile
Mechanical engineers are part of your everyday life, designing the spoon you used to eat your breakfast, your breakfast's packaging, the flip-top cap on your toothpaste tube, the zipper on your jacket, the car, bike, or bus you took to school, the chair you sat in, the door handle you grasped and the hinges it opened on, and the ballpoint pen you used to take your test. Virtually every object that you see around you has passed through the hands of a mechanical engineer. Consequently, their…
Read more
Career Profile
Cars are an important part of our daily lives. We depend on them to perform everyday tasks—getting to and from school and work, sports practice, grocery shopping, and various errands—and also to keep us safe while doing so. Our cars can keep us cool or warm while we drive them, and they even help us find our way. The automobile is made up of complicated braking, steering, and electrical systems, in addition to the engine and drive train. All of these systems require a tremendous…
Read more
Career Profile
You use mechanical devices every day—to zip and snap your clothing, open doors, refrigerate and cook your food, get clean water, heat your home, play music, surf the Internet, travel around, and even to brush your teeth. Virtually every object that you see around has been mechanically engineered or designed at some point, requiring the skills of mechanical engineering technicians to create drawings of the product, or to build and test models of the product to find the best design.
Read more
Career Profile
There are so many different types of cars and trucks on the road: sports cars, sport utility vehicles (SUVs), pickup trucks, and even electric vehicles and hybrids. Have you ever wondered how they work? And, how to keep them running? How does the engine make a car's wheels turn? Why does pushing the brake pedal make a car stop? Automotive service technicians (also called mechanics) can pop open the hoods of these different types of cars and answer these questions. Automotive technicians know…
Read more
Explore Our Science Videos
Science Buddies: Pilobolus Spore Sac Launch
Marble Machine: 2016 Engineering Challenge
Follow the Flow: 2017 Engineering Challenge